Used Maple Lab Scienfific Bh 603 for sale (2,905)

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Hsdpfx Aezhnlusaiofk

Condition: used, mileage: 3,613 km, power: 12 kW (16.32 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 1,960 kg, empty load weight: 1,875 kg, maximum load weight: 85 kg, axle configuration: 4x4, number of seats: 1, first registration: 04/2015, digging bucket width: 10 mm, brakes: other, Year of construction: 2015, operating hours: 3,613 h, driver cabin: other, Equipment: cabin, head guard, soot filter, * German machine * Original, only 3,613 operating hours * Condition, see photos * Volvo EC20D tracked mini compact excavator * Digging bucket 1,200 mm * Quick coupler Lehnhoff * Dozer blade, manually adjustable up to 1,356 mm * Maximum digging depth 2,354 mm * Width-adjustable undercarriage. For maximum flexibility, the undercarriage can be extended or retracted in width according to your requirements. The width can be reduced to pass through narrow passages. The undercarriage can be widened for greater stability and higher performance. * Counterweight at the rear * 2 additional digging buckets (see photo), available at an extra charge * Swing within the track width. The machine swings within the tracks when in offset position, so that potential damage is avoided when working near obstacles. * Intuitive fingertip controls. The boom offset and auxiliary hydraulics are operated via intuitive fingertip controls instead of pedals. * Volvo engine D0.9A with 12 kW - 898 cc * Maximum speed in fast travel mode 4.7 km/h * ROPS and FOPS comfort cabin * The spacious, ergonomic, and safe Volvo cabin (protective roof) offers perfect all-round visibility, intuitive controls, and built-in comfort. * Front window can be opened with gas spring assistance * Sliding window on the right * Coordinated hydraulic system * Climbing ability 30° * Fuel tank 20 liters * Axial piston hydraulic motors with planetary reduction gearbox * Heater * 250 mm rubber tracks * 4 fixed lashing points for transport * Comfort seat * Unladen weight 1,875 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Hodpszcx H Hefx Aaiefk Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), Manufacturer: GARDNER DENVER Type: G200 2 BH 1900 -7AH17 Electric power: 12.5 kW RPM: 2920/minute at 50Hz Hsdpfxof H A Dxs Aaijfk Pmin: 280 mbar

Condition: ready for operation (used), Heidenhain LS 603 ML 170mm length measuring device ID: 237640-01 SN: 2361069A with LS 603 reading head 80554682 – cable length 3m, used, in good condition, fully functional, scope of delivery as per photos. Hsdpfxjy Nqi Uo Aaiofk

Condition: ready for operation (used), Heidenhain LS 603 length measuring rod ML 470 mm Id.336 972-6T SN:12359072E + AE LS 603 reading head Id. 326 799-01, the article has been refurbished, used, normal signs of wear, 100% functional, scope of delivery as per photos Hjdpfercvkbsx Aaiefk

Condition: ready for operation (used), Heidenhain LS 603 ML 170mm linear encoder ID: 336 972-6H SN: 13339066E with AE LS 603 read head ID: 326 799-01, used, in good condition, 100% fully functional, scope of delivery as per photos. Hfsdpfx Aoy Nqkfjaijk

Condition: ready for operation (used), Heidenhain LS 603 ML 320mm ID: 336 972-6P length measuring scale SN: 19282750H with AE LS 603 reading head ID: 326 799-01, used, in good condition, fully functional, scope of delivery as shown in the photos. Hsdpfx Aajx Dwwrsijfk

Condition: used, mileage: 27,105 km, power: 62 kW (84.30 HP), first registration: 03/2022, overall weight: 4,800 kg, fuel type: diesel, color: silver, axle configuration: 4x2, maximum load weight: 1,850 kg, empty load weight: 2,950 kg, next inspection (TÜV): 11/2026, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, parking sensors, soot filter, * German vehicle * 1st owner * Original 27,105 km * Only 3,310 operating hours * Condition, see photos * Ideal for narrow streets, pedestrian and cycle paths, extremely maneuverable thanks to articulated steering * 3-brush sweeping system – 2 side brushes left and right Ø 800 mm – shock-resistant brush mounting * Third front brush for a sweeping width of 2,700 mm and for cleaning corners and ramps, usable on both left and right * Floating, wide suction mouth made of cast aluminum between the front wheels * Debris container made of stainless steel, hydraulically tiltable and closable, capacity 2.0 m³ * Smart-Con control unit: multifunction armrest with Smart-Start function enables operation of all work functions single-handedly * Comfortably sprung, sound-insulated aluminum cabin with two seats * Infinitely variable hydrostatic drive. Two driving modes with automatic, load-dependent electronic control. * Air-conditioning * Road speed 50 km/h * Working speed up to 15 km/h * Emissions standard Euro 6d * Engine displacement 2,970 cc with 62 kW * Fuel tank 80 L * Parking assist camera * Side cameras left & right * Rotating beacon * Additional headlights * Heated exterior mirrors * Wheelbase: 1,900 mm * Gross vehicle weight 4,800 kg * Curb weight 2,950 kg * Payload 1,850 kg * Self-propelled working machine Hsdpfx Aasy E Tuxjiofk If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, no new DGUV, no new SP, no new UVV. You can find further commercial vehicles on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to ensure the buyer has a correct understanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos * Articulated Komatsu WA 63 - 3 * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab Hfjdpfxszcbume Aaiok * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Ceramic measuring plate by Johannes Fischer Aschaffenburg Hjdpfjix Ahqex Aaiofk in laboratory quality, 1000x1000mm Flatness below 1µm (!) Includes cabinet base with 2 doors Measurement protocol available upon request for an additional charge.

Condition: used, mileage: 1,001 km, first registration: 01/2008, empty load weight: 330 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2008, load capacity: 3,000 kg, Equipment: crane, Vehicle location: Bovenden. Grab grapple with vertical cylinder! Nominal capacity: 250 liters, working width: 500 mm, opening width: 1390 mm! With Kinshofer KM 04 F rotary motor and upper mounting! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hjdpfx Aaoi Rlrmjijfk

Condition: used, mileage: 1,001 km, first registration: 01/2003, empty load weight: 265 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2003, load capacity: 3,000 kg, Equipment: crane, Vehicle location: Bovenden, Clamshell bucket with upright cylinder! Nominal capacity: 250 L, construction width: 500 mm, opening width: 1390 mm! Hodjyif Rvopfx Aaisfk Complete with Kinshofer rotator and upper suspension! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket * Forks * Additional work lights * Quick coupler * Tires: 12.5-20 Other information: * 2 previous owners * German machine Hfedpfx Aasyn Tt Ejijk * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, We offer an very special development line of water transfer printing with complete know how of CUBIC - JAPAN EQUIPMENT CAN BE USED FOR ALL KIND MATERIALS, PLASTIC, WOOD, METAL AND OTHER.... Specifications Manufacturer COLOR DEC Model ITALY-CUBIC LAB 2000 Year 1996 Condition Used COMPLETE CUBIC PLANT- 3D WATER TRANSFER PRINTING EQUIPMENT LOOK ATTACHED PHOTOS Include complete production equipment for 3D watertransfer print. Hfjdpfxsvk Ev Ho Aaiek -washing machine -transport system for clean room -clean room humidity device -storage for the CUBIC FILMS - heating-drying cabine for lack drying -bath with halfautomatic floating system- possiblle to make more parts at once, depende from the size of printing parts Equipment is in perfect working condition, ready to use. FOR ADDITIONAL PHOTOS WE CAN SEND BY EMAIL. ALL DOCUMENTATION WILL BE PRESENT TO BUYER.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic cleaning machine with rotating table Hedpfxsywcv Nj Aaisfk CNC cleaning machine

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. Hfjdpeiiyppjfx Aaiok torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: new, Year of construction: 2022, Guide-rail guided plate shear VS 3006 with sheet metal holding device DURMA IV – special price* – demonstration machine Operating hours: 0 hours Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 – 2° Back gauge: 1,000 mm, CNC-controlled Motor power: 11 kW Length: 4,100 mm Hsdpfx Ajf U Th Eeaijfk Width: 2,050 / 3,650 mm Height: 1,950 mm Oil capacity: 125 l Weight: 7,500 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will gladly provide you with further information. *plus transport and installation costs

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm Hfsdpfxsfl T T Nj Aaiek • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: used, Year of construction: 2010, operating hours: 4,559 h, Equipment: * Operating hours: 4,559 * Cab * Trenching bucket Hfodpfx Asx Rv Huoaisk * 1 bucket * Rubber tracks * Well-maintained machine Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke consistently stocks around 200 vehicles from the categories of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special rates. If interested, we are happy to provide you with a tailored offer! Trade-in of your commercial vehicle or construction machine is welcome. If a new TÜV inspection is required, we can provide you with an offer from one of our partner workshops. Our offers are generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible at extra cost through our external partners. The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typographical or data transmission errors. Listed specifications should be verified separately if necessary. Subject to error and prior sale.

Condition: good (used), functionality: fully functional, conveyor belt width: 615 mm, total width: 2,500 mm, total length: 1,195 mm, total height: 1,220 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 615 mm, space requirement height: 1,220 mm, space requirement length: 1,195 mm, space requirement width: 2,500 mm, type of input current: three-phase, Dough Sheeter Seewer Rondo SSO 603 Suitable for all types of dough, for sheeting and laminating. Floor-standing machine, belt width 615 mm. Mobile dough sheeter. Top-mounted flour container. Connection: 400V, 16A CEE plug. Dimensions: 2500 x 1195 x 1220 mm (W x D x H). Hfodpfx Aaey Srtgsiek Used machine.

Condition: used, Technical details: grinding diameter: 250 mm Hsdpfx Aaoyzptieijfk grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: used, functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 14,000 kg, BHS - DKX 4.0 Single Shaft Mixer in very good condition, suitable for concrete, roller-compacted concrete, cement-bound road base, sludge, etc. Thanks to the bottom discharge flaps, even challenging, cohesive, or coarse materials can be mixed effectively. Motor power: 130 kW, empty weight: 14 tons, output: approx. 400 tons/hour. PLC and new electrical cabinet also available. Price on request. Hfedpfjxxtk Djx Aaisk Haendle Box Feeder BKS 1506 with steel plate belt conveyor, large extensions (25 cbm), and two separately driven ripping shafts for challenging materials. Suitable for clay, loam, cohesive materials, substrates, humus, waste, etc. Two units available, new control system on request. Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: 8259211467, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS6000U, laser hours: 8,000 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 400 mm, pipe length (max.): 6,000 mm, table length: 3,060 mm, table width: 1,530 mm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, positioning speed: 140 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 4 kW (5.44 HP), input voltage: 380 V, total length: 12,635 mm, total width: 7,905 mm, total height: 2,277 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, - Cutting head: Precitec Procutter 2.0 F150 TUBE CUTTING FUNCTION - Max diameter of tube to be cut (D): 30 - 400 mm - Max square tube: 250 x 250 mm Hfedpfx Aoy Naypeaijk - Cutting range of profiles (length): 3000 mm - Max length of tube to be cut: a) Round tube Dmax = 115 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) b) Square tube 30 x 40 up to 80 x 80 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) c) For larger tubes and profiles, max length is 3000 mm - Positioning accuracy of tube/profile cutting: +/- 0.5 mm per 1000 mm. This value is given for the first 1000 mm. Further accuracy depends on the straightness and precision of the tube/profile. CNC and Software coming with the machine: - CNC control: SIEMENS SINUMERIK 840D - LANTEK Expert Cut-Plus: 1 license (recommended to update) - 2D file import. Dwg and dxf - CSV file import (Lantek format and data must be followed)Warehouse module shows sheet residues and stock levelsPlugin for SolidWorks and Solid Edge - LANTEK Flex3d TUBES: 1 license (recommended to update) - 3D importCSV file import (Lantek format and data must be followed) OTHER OPTIONS - Automatic nozzle cleaning and calibration - Exhaust gas filter - Central lubrication - Motorized scrap conveyor under the working table - Work zone lighting - Remote management for factory technical support machine is available for immediate delivery. The buyer has the right to ask questions and come over to check the machine. Later claims will not be considered. Dismantling of the machine, packaging for transport, loading into a container/truck - not included in the machine price.

Condition: used, Year of construction: 1996, Used Capping Machine Bertolaso Sigma 603 up to 4500 bph Firstly, the used Bertolaso Sigma 603 capping machine is a technologically advanced solution. It ensures high performance up to 4500 bottles per hour. Designed for maximum efficiency in the capping process, it integrates seamlessly into production lines. Indeed, its versatility and reliability are unparalleled. Technical Features of the Capping Machine Bertolaso Sigma 603 Specifically, the Capping Machine Bertolaso Sigma 603 model features three heads for aluminum screws. These are configured for caps measuring 31.5 mm by 44 mm. Furthermore, a centrifugal cap distributor ensures constant and precise cap feeding. Consequently, it optimizes the capping process, eliminating interruptions. Moreover, mobile capping heads and a manually adjustable height capping head offer great flexibility. They easily adapt to different bottle and cap types. Additionally, the Capping Machine Bertolaso Sigma 603’s frame is painted and clad in stainless steel. This ensures durability and ease of cleaning, which is essential in production environments. Safety and Efficiency Regarding safety, integrated safety protections ensure operator safety during the bottling process. Furthermore, bottle entry from the left and adjustable production speed offer significant control. The machine can handle three formats of cylindrical bottles, demonstrating exceptional versatility. Hence, the capacity of the Capping Machine Bertolaso Sigma 603is of 4500 bottles per hour, this highlights its productivity. History and Reliability Hjdpovgt Hxjfx Aaiofk Manufactured in 1996, the Capping Machine Bertolaso Sigma 603 has proven its reliability and longevity. These factors are crucial for those seeking an efficient but used capping solution. Its long service history confirms the machine’s quality construction. It also shows its ability to maintain high performance over time. Conclusion of the Capping Machine Bertolaso Sigma 603 In conclusion, the used Bertolaso Sigma 603 capping machine up to 4500 bph exemplifies Italian engineering in the bottling sector. Through its combination of flexibility, efficiency, and safety, it makes an ideal choice. It ensures high production capacity and consistent quality of the product, making it a valuable asset for any bottling line.

Condition: used, This listing is for the Radiometer Analytical MeterLab PHM220 Lab PH Meter Hfsdpfx Aeywy Iveaijk The unit is in full working condition and is ready for immediate use Th Radiometer Analytical MeterLab PHM220 is a high-precision benchtop pH meter designed for accurate laboratory analysis. Direct-from-lab surplus in original condition, this robust unit offers reliable electrochemical testing for any professional setup.