Used Martin T 25 for sale (78,598)

Condition: excellent (used), Year of construction: 2002, coil weight: 25,000 kg, coil width: 1,550 mm, sheet thickness (max.): 4 mm, strip width: max. 1.550 mm strip thickness: 0,4 - 4 mm coil weight: 25 t mandrel Ø: 508/610 mm Djdjy Nxn Espfx Abfsuu coil OD: max. 2.000 mm speed: max. 135 m/min working direction: left-> right

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm Djdpoy Nypkefx Abfeuu year: 1990/2002/2006/2016/2019

Condition: used, functionality: fully functional, machine/vehicle number: 2481588, Year of construction: 2017, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 140 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, power: 37.4 kW (50.85 HP), fork carriage width: 1,038 mm, fork length: 11,150 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 145 mm, turning radius (outer): 2,265 mm, front tire size: 7.00-12 12, rear tire size: 6.00-9 10, overall weight: 4,000 kg, total height: 2,115 mm, total length: 3,685 mm, total width: 1,155 mm, color: red, fuel: diesel, Equipment: cabin, pallet forks, Technical Specifications Year of manufacture: 2017 Engine: Diesel, 37.4 kW Drive: 2WD Lifting height: 4.70 m Dodpfxjyqz Eho Abfjuu Load center: 500 mm Free lift: 140 mm Overall dimensions (L x W x H): 3.68 m x 1.16 m x 2.12 m Fork dimensions (L x W x H): 1.15 m x 0.12 m x 0.040 m Travel speed loaded/unloaded: 18.0 km/h / 18.5 km/h Max. load capacity: 2,500 kg Max. gradeability: 20% Turning radius: 2.27 m Weight: 4,000 kg Tyres: super elastic Fully functional, normal signs of use, Triplex mast TLL47 with free lift, 2WD drive, full cabin.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Dsdpfxstxirfj Abfouu

Condition: excellent (used), functionality: fully functional, Lathe Takisawa TS-25 The Takisawa TS-25 Technical specifications for the Takisawa TS-25 Djdpoy Artnjfx Abfjuu Turning diameter: 280 mm Turning length: 600 mm Spindle speeds: 40 – 4,000 infinitely variable Spindle bore: 62 mm Drive power: 18.5 kW Control: Fanuc 15 T

Condition: new, Year of construction: 2023, operating hours: 3 h, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, power: 16 kW (21.75 HP), total height: 2,220 mm, total length: 2,550 mm, total width: 1,200 mm, color: other, Year of manufacture: 2023 Empty weight: 5.743 kg Lifting capacity: 2.500 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = Dusdpowlzb Tjfx Abfou - Beacon(s) - Freelift - Non marking tires - Side shift = Remarks = General Country of production: Italy Condition CE type: CE Enclosed cabin, Hoppecke battery 700 AH with charger, Non marking tyres, 4th hydraulic valve, Bluespot

Condition: good (used), Year of construction: 1990, Offer 25210 Technical data: - Load capacity: 8,000 kg - Both axles steerable / all-wheel steering (knuckle steering) - Tow bar usable at both front and rear sides - Solid rubber tyres: 425 / 150 - 305 - Platform length approx.: 2,500 mm - Platform width approx.: 1,250 mm - Platform height approx.: 500 mm - Total length without tow bar: 3,300 mm - Total length with tow bar approx.: 4,400 mm Djdpfx Ajwwi R Hjbfsuu - Weight approx.: 700 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. Dsdoxqgwzepfx Abfsuu What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 10,633 h, load capacity: 2,500 kg, lifting height: 4,865 mm, free lift: 1,519 mm, fuel type: gas, mast type: triplex, construction height: 2,204 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Hydrostatic / 2-pedal operation Duodpfxsydr H As Abfeu Condition: Ready for operation and fully functional Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 23x9-10 Front Tyres Condition: 60 - 80% Rear Tyres Type: Superelastic Rear Tyres Size: 23x9-10 Rear Tyres Condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection logbook. Refurbishment available at additional cost. Should you have any further questions, please feel free to contact us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. Leasing & financing options as well as cost-effective delivery can be arranged on request. We also accept Linde equipment as trade-in – even if you do not purchase a unit from us. Operating hours shown reflect the status at the time of listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner, built-in Kaup fork positioner with separate side shifter, 3rd valve, 4th valve, rear work light, heater, road approval (StVZO), full cab, air conditioning, full free lift, safety light, VIEW roof window, pressure release shut-off, vehicle lighting according to German road regulations (StVZO), 2x front LED work lights, 1x rear LED work light, rear Bluespot, elevated dust protection, gas tank can be converted to accept a standard 11kg bottle.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,714 h, load capacity: 2,500 kg, lifting height: 6,465 mm, free lift: 2,274 mm, fuel type: gas, mast type: triplex, construction height: 2,804 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Load Centre: 500 ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast Type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Refurbished without warranty Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 23x9-10 Front Tyres Condition: 20 – 40% Rear Tyres Type: Superelastic Dujdpfx Absydr Hvefsu Rear Tyres Size: 23x9-10 Rear Tyres Condition: 20 – 40% Description: Delivery includes new FEM 4.004 inspection with inspection certificate. For further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website at fleischmann-foerdertechnik. We are happy to provide offers for leasing & financing as well as delivery at attractive rates. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The operating hours shown were recorded at the time of listing. Subject to prior sale, changes, and errors. Clamp Fork, Sideshift, Durwen Clamp Fork with separate sideshift 3rd Valve, 4th Valve, Rear Working Lights, Heater, Road-legal (StVZO), Full Cabin, Air Conditioning, Full Free Lift, Safety Light, Double Bottle Holder

Condition: used, functionality: fully functional, machine/vehicle number: H2X392J00858, Year of construction: 2018, operating hours: 4,926 h, load capacity: 2,500 kg, lifting height: 5,510 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,430 mm, fork length: 2,400 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: H2X392J00858 Mast type: Triplex Technical condition: good Dusdpfx Absuhxd Tofsu Description: Linde H 25 T-02 No.: M0580 Year of construction: 2018 Operating hours: 4,926 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, 3rd valve,

Condition: good (used), Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis forklift T 25 -Gearbox: Hurth HFP 50 -Wheels: Ø 380 x 180 mm -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 440/400/H500 mm -Total weight: 179 kg Dodpsxl Am Iefx Abfouu

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation Duodpoxaa Thefx Abfou - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: used, functionality: fully functional, mileage: 405,000 km, first registration: 08/2019, fuel type: diesel, Compact cab, multifunction steering wheel, Medianav, tarpaulin body with sliding cover, Anteo tail lift, spare wheel. Dujdpfx Aboyir Tmofou

Condition: used, Year of construction: 2016, - Brand: Manitou - Type : MH 25-4T BUGGIE - Year of construction: 2016 - Hours: 2544 - Engine: Kubota diesel - Drive: 4x4 - Lifting capacity: 2500 kg. - Lift height: 370 cm. - Clearance height: 200 cm. - Sideshift - Work lights Djdpfxex H Ayao Abfouu - Road lighting - Dutch license plate - Nice clean 4x4 forklift - Trade-in and transport possible - Safety inspection possible * Brand: Manitou *Type: MH 25-4T BUGGIE * Construction year: 2016 * Engine: Kubota diesel * Drive: 4x4 * Lifting capacity: 2500 kg. * Lifting height: 370 cm. * Clearance height: 200 cm. * Hours: 2544

Condition: new, Year of construction: 2024, operating hours: 55 h, Exhibit available immediately: Kaeser SK 25 T - 8 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 2 Year 2024 Operating hour: 55 h Pressure: 8 bar Nominal power: 15 kW Dodpjunliqefx Abfjuu Delivery rate: 2.51m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Duodpfedrc Txsx Abfsu Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Dujdpfxoxrtb Ns Abfeu Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Year of construction: 2000, condition: good (used), machine/vehicle number: Nbg, Only brackets available !!! 1x steel chain hoist with 2 load strands each 125KG with a Müller Martini pneumatic stacking tongs - gripper - lifter bundle Camp type 0277.0401 including chassis for mounting on Stahl KT2000, ABUS HB, or Demag KBK For paper, pallets, cardboard boxes etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4m Weight complete approx. 150 kg Connection to 400V 50Hz Good condition, fully functional Different years of construction, about 20 pieces available! Item location is 75053 Gondelsheim Dujdpfx Abshy Eqhefsu See pictures Shipping by forwarding agent or pick-up

Condition: excellent (used), Year of construction: 2000, Robust swiveling milling machine T 26, swiveling from -45 to +45 degrees Reversible drive motor 5 / 6kW with automatic motor brake R/L rotation Swiveling angle from -45 to +45 degrees, electrically adjustable Height adjustment max. 150mm, electrically adjustable When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, with automatic calculation of the cutting depth. Stop with lifting device, swiveling away (for curved milling work) Table extension on the right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Folding stop for plunge milling Workpiece clamping device Aigner Centrex Original Martin cast iron table top, left 500mm, right 500mm with two insertion guide rails 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers Feed connection, switchable from the control panel Comfort stand with electrically height-adjustable feed support, which can be swiveled away for machine setup and then easily locked back into place. Dust extraction port 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted (special color RAL1015) V-belt renewed Operating manual CE marking Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this provider". Dodpjzbm Tfjfx Abfouu

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm Dusdpfx Abjqlck Nsfsu 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the Dsdpfx Absqlckpofeuu the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Djdov Erkaepfx Abfeuu Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease Djdjqlclbjpfx Abfouu 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Djdpfxezbc D Hs Abfjuu Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.