Used Martin T 25 for sale (79,006)

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Itedpfx Ahjyi A Tde Aji

Condition: good (used), Table milling machine Martin T 25. Isdey Srtmspfx Ah Ajti

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Itodey Ahplepfx Ah Aoi Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2002, For sale are 2 air cannons for silo discharge. Manufacturer: Martin Engineering Capacity: 50 liters Operating pressure: 8 bar Year of manufacture: 2002 1 piece Capacity: 25 liters Iodpfxsh A H The Ah Ajti Operating pressure: 10 bar Year of manufacture: 2011

Condition: used, Year of construction: 1997, Tilting spindle: Yes, -5 to 45° Height adjustment: electric Tilting adjustment: electric Itsdpjy Hqd Hefx Ah Aji Table opening: electric Fence adjustment: manual Height display: digital Tilt angle display: digital Milling fence display: digital Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 Power consumption: 5 / 6 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2500 mm Machine width: 1400 mm Weight: 1100 kg

Condition: good (used), 25 linear meters of tire racking Used, very good condition, see photos. Height: 2.5 m Depth: 50 cm Bay load: 9000 kg Frame length: 2.1 m Frame with shelf load/bay: 1000 kg Negotiable price: €1,950.00 net, ex warehouse The offer includes: Isdpsfdik Iofx Ah Aoti + 12 units of frames, pre-assembled, 9-ton bay load, depth 50 cm, height 2.5 m + 66 units of beams, length 2.1 m, 1000 kg shelf load/bay + 132 units of locking devices + 24 units of concrete anchors + Load capacity signs Other configurations available upon request! The goods are in stock. Transport and assembly are possible upon request. Inspection is possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Purchase/Sale: We are constantly looking for, or offering, numerous items from various sectors: Clean business premises clearances Business liquidations Quick, flexible, and efficient! We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you immediately. To visit our website, please click on our logo!

Condition: excellent (used), Year of construction: 1994, Tilting Spindle Moulder Manufacturer: Martin Model: T25 Year of manufacture: 1994 Ijdpfx Ahjyvrnro Aoti Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 2 spindles, 30 mm / 40 mm Power: 5/6 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 1,500 kg

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Condition: Well-maintained (from a public facility) Design: Table size: 1255 x 900 mm Table height: 900 mm Table opening: 305/225/160/105/72 mm Weight: 1150 kg Spindle speeds: 3000/4500/6000/9000 RPM with belt quick-change device Indicators: electronic speed display, digital (LED) for spindle height (absolute and relative), as well as for swivel angle; automatic display of the correction value for the milling depth; dual operating hour counter for total and batch runtimes Milling spindle: electrically swiveling +/- 45, 50° via push button; electric height adjustment with rapid and slow traverse; with steep taper SK 40; collet chuck, quick-change system incl. torque wrench; wear-free, electrically braked; electropneumatic locking via selector switch Spindle stroke: 150 mm at 5/6 kW and 7.5 kW, 125 mm at 7.5/9.5 kW Milling fence: Milling fence made of aluminum, hard-coated with holder for groove plate or guide rails Handwheel adjustment according to mechanical digital counters, infeed table can be adjusted separately, workpiece diameter max. 250 mm Extraction: two 120 mm diameter connections Maintenance: central lubrication via pump, lubrication of the milling spindle via grease metering device Accessories: milling arbor 30 mm, wrench, torque wrench for collet chuck system, oil press, grease press, ball bearing for infeed ring 62 mm, groove plate, arc milling guard FRS 95 for milling operations on the infeed ring with extraction connection and feed strip Itjdjzmf Iwspfx Ah Aji Electrical design: lockable main switch, automatic star-delta start, wear-free electric brake, connection for extraction system control, undervoltage protection; CEE three-phase connection for feed device (5-pin socket) Emission values: noise levels according to prEN ISO 11202, workpiece diameter 125 mm, Z=2, n=6000 rpm Workplace emissions: Idle noise (without extraction): 68.6 dB(A) Operating noise (with extraction): 84.6 dB(A) Working on the milling fence - Input side max. 0.34, output side max. 0.28 With slot hood - Input side max. 0.21, output side max. 0.20 Minimum extraction volume for both extraction connections: 24 m³/min at 1000 Pa Special equipment: Model T26, 5/6 kW (6.8 / 8.2 HP) design with CPS - Type Gamma V guard; equipped with Centrex guard; control panel swiveling with control buttons and digital display for milling spindle swivel and spindle up/down, with relative and absolute measurement display and automatic display of the correction value for milling depth during swiveling; necessary if a feed device is installed to the right of the milling fence. Milling fence with retractable mechanical digital counter for total adjustment Integral fence 650 and 500 mm long with extension rod Support for feed device holder (can be swiveled away) with motorized height adjustment (for machine with control panel) Milling arbor SK 40, 30 mm diameter, clamping length 140 mm (200 mm tool diameter) Availability: Short-term Location: Flörsheim

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Itjdpjt U Rn Ssfx Ah Aoi Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Isdspgkmwjpfx Ah Aeti Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Itedjpq If Dopfx Ah Aji Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately - Ijdpfx Aew D T Dkjh Aeti

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard Itjdpsr Hr D Nsfx Ah Asi - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, Second-hand machine Itjdjzlbqxjpfx Ah Aoi Features and technical specifications: - Table dimensions: 800 x 1000 mm - Diameter of table opening: 480/380/170/125 mm - Milling spindle taper: MK 5 - Spindle speed: 3000 rpm - Height adjustment range of the router spindle: 150 mm - Distance from centre of milling spindle to front edge of table: 400 mm - Maximum permissible tool diameter: 250 mm - with wooden stop jaws (can be replaced with metal stop jaws on request) - with wooden Her 3-roller feed mechanism - with heavy-duty sliding table

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Iedpfsh U A Evsx Ah Aeti Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Itsdpfeyync Tsx Ah Aji Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Very well-maintained (from a public facility) Technical features: Table size: 862 x 1504 mm, made of cast iron, incl. standard table extension Table height: 900 mm Rip fence/slider: 3000 mm, made of aluminum Saw blade change: Quick-change system ProLock Saw blade diameter: 250 - 550 mm Saw blade swivel: +46° to -46° Cutting height: max. 204 mm/saw blade 550 mm; max. 134 mm/saw blade 550 mm at +45° and 125 mm at -45° Iodezkw Ahspfx Ah Asti Motor power: 7.5 kW (10 HP) 400 V-50Hz, Constant speed: 3800 rpm, Infinitely variable speed control from 2000 - 6000 rpm Cutting width: 1100 mm Length stop with 2-point support and two stop elements, fine adjustment with magnifying glass for the inner stop segment, dimension display with scale, length compensation for miter cuts with electric support, additional workpiece support near the saw blade, cutting line 255 - 2025 mm, extendable to 3365 mm Control panel at eye level, can be swiveled away, ergonomically advantageous, adjustable inclination, twice rotatable, incl. template holder Performance features of the control system Touch-screen control panel 10.4" (264 mm) for T 75 Prex Cutting height and cutting angle controlled electronically Cutting width controlled electronically Electromotive positioning of the parallel stop Incl. sensor-monitored safety guard Automatic length compensation "RadioCompens" (length stop) incl. radio-controlled adjustment of the parallelogram cross table Electrically positionable scoring width - scoring saw Electrically positionable scoring height - scoring saw Electrically positionable scoring width left-right - scoring saw Adjustment and digital display of the tool position (cutting height/angle) based on stored tool data Miter cuts and crosscuts with thickness compensation Tool data memory for 50 workdays Automatic referencing of the axes Controlled and manual movement of the controlled axes possible Display for speed and tool diameter Integrated calculator with axis-related memory function, integrated operating hour counter Mitrex double miter fence Miter cutting system "RadioCompens", 2-point support consisting of: digital 2-point length stop, parallelogram cross table with radio connection to the control system (full integration of the table angle as the 5th axis in the control system) Front table 600 x 350 mm, foldable Availability: Short-term Location: Flörsheim

Condition: good (used), Year of construction: 2004, Sawblade tiltable 0-45° ° Iedpfx Ahszkl H Ij Ajti Length of the rolling table 3.000 mm cutting width 1.100 mm Motor output 5,5 kW Cutting height 170 mm Saw blade diameter 250 - 500 mm Speed 2.800/4.000/5.500 U/min. weight of the machine ca. 1.950 kg

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine Itodswnbfkepfx Ah Aji -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Iedpfx Ahohfufge Ajti -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available Ijdpfjxlppijx Ah Aoti -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Number: max. 3x drill -Admission: M8 -right/left: rotating alternately Ijdpfx Ajf S T Iwjh Aeti -Distance drill: 25 mm, offset (see photo) -Number: 3 drill heads available -Price: per piece -Dimensions: 90/85/H70 mm -Weight: 1.6 kg/piece

Condition: used, Martin T 65 panel saw Heavy-duty precision panel saw Itjdpfxszkhk As Ah Asi 3.5” LCD color display Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram crosscut table for tilting up to 46° on both sides, LCD display, 0.01° fine adjustment for cutting angle Analog length stop with 2-point system Rip fence length: 3,000 mm Cutting width with parallel fence: 1,100 mm Fence adjustment via handwheel Fence position readout via control panel CE version Year of manufacture: 2012 Machine is WORKSHOP-TESTED and in TOP condition, from a craft business available ex works

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display One-sided motorized pivoting Sliding carriage 3000 mm Ijdszawiuspfx Ah Aoti 5.5 kW Scoring saw Location: Nattheim

Condition: used, Year of construction: 1978, Spindle tiltable: Yes, 0 - 45° Iedpfxsuzkxfo Ah Aoti Height adjustment: Handwheel Swivel adjustment: Handwheel Fence jaw adjustment: Manual Height display: - Swivel angle display: Scale Fence display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Motor brake: Yes, foot brake Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg