Used Mas U 1000 for sale (48,890)

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Gsdpfxezcwfne Aqgouh Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller manufacturer: MATSUURA, controller model: G Tech 30 i, table width: 550 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 28, number of axes: 3, This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details. • Travel X: 1020 mm • Travel Y: 550 mm Guedpezwu Stofx Aqgsh • Travel Z: 500 mm • Table Length: 1150 mm • Table Width: 550 mm • Table Load: 500 kg • Spindle Speed: 12,000 rpm • Tool Holder: SK40 / BT40 • Rapid Traverse: 40 m/min • Tool Positions: 28 Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Gujdpot Dx Urefx Aqgjh

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: Guedpfx Aszy Uvkoqgjh - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: used, machine/vehicle number: 42412110002654, mileage: 288,139 km, power: 70 kW (95.17 HP), first registration: 01/1980, empty load weight: 5,850 kg, overall weight: 6,800 kg, Year of construction: 1980, operating hours: 7,215 h, Equipment: crane, The UNIMOG is equipped with an Atlas AK1402 loading crane, providing versatile applications. Its short wheelbase makes it particularly maneuverable in tight access areas, on forest paths, and in confined work environments. The all-wheel drive ensures good traction on difficult terrain, while the auxiliary gearbox with working group enables slow and powerful operation. The vehicle mounting plate allows for the use of various attachments. Used UNIMOG 1000 with Atlas AK1402 loading crane • First registration: 01/1980 • Mileage (read): approx. 288,139 km • Operating hours (read): approx. 7,215 • Power: 70 kW/95 hp • Unladen weight: 5,850 kg • Permissible total weight: 6,800 kg • Trailer load: braked 22,000 kg, unbraked 1,500 kg • Auxiliary headlights • Exhaust pipe pointing upwards • 12 V electrical system • Auxiliary gearbox with working group • Side drive at the bottom • Mounting plate for attachments (mowing head, grab arm, etc.) • Flatbed: L: 148 cm x W: 190 cm x H: 40 cm Guodpfx Aqez Aqykegoh Loading crane Atlas AK1402 1 hydraulic extension Load capacities: 3.9 m – 1,030 kg 5.2 m – 770 kg This offer is subject to change. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 1971, Tos cylindrical grinding machine Complete with all accessories. Godpfjz N Snzox Aqgsuh

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Gujdsz I Az Uopfx Aqgeh Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, Gsdpfx Aqozvdfaegjuh - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, Gsdjtv Iibspfx Aqgeuh coolant device,

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. Guedpfx Ajy I Ak Uoqgoh The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 200,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Guodszcfnqopfx Aqgeh Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Tailstock retrofitted with automatic cylinder error compensation Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.

Condition: used, Year of construction: 2006, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm weight of the machine ca. 3,5 t Machine completely overhauled with 12 months warranty Mechanically and optically like new Photos from the last overhauled machine with different options Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment Godpfxot Ii Nbe Aqgouh -fine adjustment upper table -Paper belt filter SBP4 240l

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm Gusdpszxy Szsfx Aqgeh • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Gujdpfsvyrwpjx Aqgeh

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,200 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, table diameter: 635 mm, TECHNICAL DETAILS Travel X-axis: 1,016 mm Travel Y-axis: 635 mm Travel Z-axis: 635 mm B-axis: 120-35 ° C-axis: 360 ° Spindle: SK 40 Speed: 8,100 rpm Table diameter: 635 mm Tool changer: 30 stations MACHINE DETAILS Number of axes: 5 Operating hours Power-on time: 4,300 h Cycle time: 2,200 h Godpfjx I Ag Aex Aqgsuh EQUIPMENT Control panel with touchscreen Network interface Wi-Fi connection 1 GB part program memory Power failure detection module Control cabinet with air conditioning unit Wireless measuring system Coolant unit Programmable coolant nozzle Prepared for retrofitting internal coolant supply Hinged belt chip conveyor

Condition: used, Year of construction: 2013, Manufacturer : OLSA Model : Fusore CP 1000 Year : 2013 Type : Melter Vessel : Total volume: 1,130 L Operating temperature: −10 to +95 °C Pale anchor-type agitator + scrapers Bottom-mounted dissolver Guodpfx Aezxifqjqgoh Number of scrapers: 3 Pressure: atmospheric Jacketed : Volume : 55 L Operating temperature: −10 to +95 °C Pressure : 0 - 4 bars Atmospheric pressure Skid: CIAT plate heat exchanger + pump: Year : 2013 Model : PWB8 11 025H00 Min./max. permissible temperature (TS): 0 / 110 °C Min./max. permissible pressure (PS): 0 / 10 bar Test max. pressure (PT): 15 bar Electrical cabinet with PLC + HMI Technical Data available  

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. Gsdozrfirspfx Aqgouh The buyer is responsible for moving the machine.

Condition: used, Year of construction: 1998, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Überholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware Antriebe,Motoren,Maßstäbe aus Originalmaschine. Werkstückspindelstock nur umlaufend mit 320Nm numerisch gesteuerte B-Achse Innnschleifeinrichtung Dia 120mm HF-Spindel Schleifscheibe links Durchmesser 400mm Gusdpfxjz Ikvgs Aqgoh Schleifscheibe rechts Durchmesser 400mm Innenschleifeinrichtung für HF Spindeln Reitstock mit Mikroverstellung KEL SET Messsystem Aktiv-Längspositionierung Kel-Pos Anschnitt-Sensor Marposs

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Guedpfx Asz Ikz Aeqgeh Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: ready for operation (used), Year of construction: 2020, laser power: 54,000 W, number of axes: 3, This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details. • Cutting technology: High Definition Plasma Guedpfx Aqsy Ephaogeh • Tube capacity • Max tube length: 8,000 mm • Min/Max tube diameter: 100 mm / 750 mm • Min/Max wall thickness: 3 mm / 20 mm • Cutting capabilities • Straight cutting, bevel cutting, V bevels, Y bevels, 3D tube cutting • Axis configuration / movements • X (longitudinal): Double synchronized brushless drive with electronic axis control on both sides of the gantry; guide length 11,000 mm; double motorization • Y (transversal): Brushless drive with rack and pinion transmission • Z (vertical): Motorized torch positioning axis, speed up to 4,000 mm/min • Tube rotation axis: Synchronized spindle for tube rotation, tube length up to 8,000 mm • Bevel head – VBA WRIST • Rotation: ±540° • Tilt/bevel adjustment: ±60° • Cutting bevel angle: ±45° • Max tilt speed: 38°/sec • Tangential control during cutting • Arc-voltage torch height control • Mechanical feeler torch height control for bevel cutting • Torch collision protection • Machine construction • Heavy-duty machine frame • Longitudinal and transversal precision guides • Precision rack & pinion drive system • Brushless motors • Chuck / spindle • Synchronized spindle for tube cutting • Chuck size: 500 mm • Through hole: 150 mm • Tube supports • 3 manual support carriages with trapezoidal screw positioning • Plasma generator • Model: ESAB iSeries300i • Max current: 300 A (range 5–300 A) • Output voltage: 180 V • Power supply: 380 V / 50–60 Hz • Duty cycle (40°C): 100% • Maximum output power: 54 kW • Process gases • Plasma gases: Air / O2 / Ar-H2 / N2 • Shield gases: Air / N2 / O2 / H2O • Generator dimensions • 1219 x 898 x 1031 mm • Control system • ESAB VISION T5 CNC • 18.5” colour touchscreen, glove operable • OpWizard operator assistance software • Software • ESAB Tube Cutting Programming Software Additional equipment • Flat cutting table with slats, 1,500 x 1,000 mm

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Gjdpfswirkgox Aqgsuh Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm Gsdpfezwxmzsx Aqgjuh • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production - Compact and robust design - Good solution for joinery, furniture and structural timber production Condition: very good Gsdpsyu Up Isfx Aqgjuh Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior Gjdpfxoxzk Nie Aqgjuh grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 1988, x-travel 700 mm Guodpfxeyuttle Aqgeh y-travel 550 mm z-travel 500 mm spindle taper ISO 40 control Heidenhain type TNC 155 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team