Used Mass International Ns 2 for sale (81,787)

Condition: ready for operation (used), Heidenhain LS 403 ML 1020mm ID: 226 520 NS linear scale SN: 5947096W, used, in good condition, 100% functional, delivery as shown in the photos. Fgodpfex Er Ecex Ad Nsb

Condition: new, Year of construction: 2024, functionality: fully functional, The conveyor belt of the company MASS is for sale, NDZ 2 with corrugated edge and takt control You can also have the conveyor belt without corrugated edge and takt control then the conveyor belt costs ONLY 2359€ Fgjdsttmubepfx Ad Nsb NDZ 2 Feed: 600 mm Pitch: 1300 mm Discharge belt : 500 mm Mobile With corrugated edge With take control With hopper

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Fedsy N Tpkopfx Ad Nsgb Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, maximum load weight: 35,460 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2021, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, WIELTON NS-3 LIGHT! SAF axles, 1 lift axle, hydraulic roof with 2 height settings, 1st owner, very well-maintained condition. ----* Year of manufacture: 2021 * First registration: 12/2021 * Lift axle * Hydraulic roof – 2 heights Fgjdsy Ifzcspfx Ad Nsb * SAF axle * Edscha * MULTILOCK * Unladen weight 6540 kg * 1 owner * Very well-maintained condition * Despite our utmost care, errors in this listing cannot be excluded. Subject to errors and prior sale.

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A Fedpjxlpv Nsfx Ad Negb - with granulate suction unit - with electric heating

Year of construction: 2013, condition: ready for operation (used), A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible. Fsdpfx Adjyi E Eps Nogb

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Fedpfxswhk Dvj Ad Nsgb

Condition: used, maximum load weight: 32,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, Equipment: ABS, * NET TOP PRICE * SAF axles with disk brakes * 2 x lift axles (1/3) * Coil trough 9 meters * Lashing eyes l&r * Edschaverdeck * Portal doors * Tool box Fgjdpfxouc Inwe Ad Njb * LxWxH: 13.63 x 2.48 x 2.72 * Unladen weight: 6,700 kg * German vehicle * good condition Subject to errors and prior sale !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Fgedpexvc Igefx Ad Nob

Condition: used, Year of construction: 2011, machine/vehicle number: 136160/0002H, power: 226 kW (307.27 HP), rotational speed (min.): 1,775 rpm, input voltage: 400 V, overall weight: 1,285 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,000 mm, VEM Electric Motor incl. ABB control cabinet with converter A powerful electric motor suitable for a wide range of industrial applications. With a rated power of 226 kW, it delivers reliable and efficient performance. Thanks to its robust construction and high-quality materials, this motor is durable and low-maintenance. Featuring a high degree of protection, it is also suitable for demanding environments. Technical Specifications: Rated power: 226 kW Design: K21F Degree of protection: IP55 Fgodpstr Embefx Ad Neb Insulation class: F Voltage: 400 V Frequency: 60 Hz Number of poles: 4 Cooling type: TWS (Thermal winding protection) Weight: 1,285 kg For further details, see pictures. Condition: Used Scope of supply: 1 electric motor incl. control cabinet

Year of construction: 2022, condition: new, *STOCK CLEARANCE * DISCOUNT PROMOTION Regular price: 1.982 €, reduced price: 1.800 €. The conveyor is from 2022, new and unused. We offer 1 year warranty. Length : 2000 mm Useful width : 400 mm Fjdehgmd Sspfx Ad Negb Mobile Belt speed constant 3m/min Height adjustable : 840mm - 1240mm Side panels can be added later. For examples see pictures.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 Fodpjfhgvwsfx Ad Njgb (Product photo as an example) The machine is CE-certified.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 04.522, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, 2005 UBH INTERNATIONAL 20FT SWAP BODY Tank Container 35,000L / 1 compartment / 4 baffles / 5 lids UN PORTABLE T11 EMKD Steam heating Bottom discharge Valid 2.5-year + CSC inspection until 06-2028 Fedpfx Adoy Aymve Njgb = Further Information = General Information Year of manufacture: 2005 Model year: 2005 Suitable for: Chemicals Weights Unladen weight: 4,475 kg Payload: 31,525 kg Gross weight: 36,000 kg Functionality Cargo compartment volume: 25,000 l Body make: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of compartments: 1 Condition Technical condition: very good Optical condition: good Further information Please contact Arne Honingh for more information.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 81 h, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, Available for sale is a NS LMD2500 2Z long belt grinding machine, built in 2022 and in as-new condition. The machine has only 81 operating hours. Fgedpfx Aoy Httqod Nob Machine Details Manufacturer: NS Model: LMD2500 2Z Machine Type: Long Belt Grinding Machine Year of Manufacture: 2022 Operating Hours: 81 Condition: As New The machine is fully operational and available for inspection by appointment. If you have any questions or would like further information, please feel free to get in touch by message.

Condition: excellent (used), Printing International Cristal 90X2 Fodjv Iyh Sepfx Ad Nsgb

Condition: excellent (used), Year of construction: 2001, color: other, loading space volume: 25 m³, UBH INTERNATIONAL 20FT ISO Tank Container 22,500L / 3 compartments Compartment 1: 7,500L Compartment 2: 7,500L Compartment 3: 7,500L IMO1 Fjdpfxoyznbxs Ad Nsgb T7 22T6 Bottom discharge Steam heating 2.5-year + CSC test valid until 09-2028 = Further Information = General information Year of manufacture: July 2001 Model year: 2001 Dimensions Dimensions (L x W x H): 606 x 244 x 259 cm Weights Unladen weight: 4,550 kg Payload: 29,450 kg GVW: 34,000 kg Functional Body brand: Van Hool 24,720L TC, 2 comp. (11,950L/12,770L), L4BN, IMO1, T11 Number of chambers: 2 Condition Technical condition: very good Visual condition: very good

Condition: used, GS international Capacity 12 tons Fgedpfxeyxv E He Ad Nsb Year of construction 2010 Immediately available Loading bridge needed on site? We can transport the loading bridge for you

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. Fgjdpfx Aeyl S Nysd Nob - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, Fsdpfx Aet D D Nzjd Njgb No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Fodoy D E Rispfx Ad Njgb Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2021, Linishing machine for flat parts or rectangular tubes. Working capacity (mm) 120x120 Abrasive belt speed (m/s) 20 Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Abrasive belt motor (kW) 3 Fgjdjg R Sxvopfx Ad Nob Consumption (A) 7 Dimensions approx. (mm) 975x880x1800 Weight approx. (kg) 350

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve Fedpfx Adex Ig Sij Njgb - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut Fgedpfx Ajwrn Iyjd Nsb For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2023, Pipe drilling / slant drilling machine automatic drilling machine TDM100 2D AT - automaticwith two opposite drilling units - minimum quantity lubrication - manual material clamping - automatic feed and automatic pipe turning - max. pipe length 3.000mm - positioning accuracy +/- 0,2mm - power drilling unit 2 x 2,2 kW - manual insertion and removal of material - drilling heads +/- 50° swiveling - manual 360 degree swiveling - motor speed 295 - 2950 rpm - operation via touch panel - 100 positions programmable - illumination drilling unit - integrated tool cabinet Fjdjlgzytjpfx Ad Njgb - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Fgjdod Ev Upopfx Ad Neb Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210