Used Massey Ferguson Dm 459 Tl for sale (3,903)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Bdjdpfsxk T Efox Ahmeh Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Year of construction: 2015, condition: excellent (used), functionality: fully functional, WEBOMATIC Model: TL 250 Bodpfx Ajz Hbagohmodh Year of manufacture: 2015 Condition: very good, fully functional Equipment: 2 tools = 1x1 & 1x2 Shipping possible

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, CMZ lathe 2 axes (X, Z) TL 15 model Year 2012 Bedpfxsz Alp To Ahmsdh Fanuc Series 32i-Model B CNC Chip conveyor ✅ Hydraulic steady rest ✅

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Bjdpfxex A Tbws Ahmodh

Condition: used, Year of construction: 2017, machine/vehicle number: 17200241, usable tank capacity: 40 l, cooling capacity: 1.6 kW (2.18 HP), input voltage: 400 V, total width: 590 mm, total length: 949 mm, total height: 1,292 mm, Used Tradilevain TL-40 sourdough fermenter, designed for the preparation, storage, and regular management of sourdough in a professional bakery. Maximum usable capacity of 40 L, ideal for artisan bakeries, production laboratories, and bakeries using natural sourdough daily. Tank volume of 80 L with a maximum total capacity of 50 L, allowing for comfortable handling of sourdough preparations. Minimum usable capacity of 20 L and minimum total capacity of 25 L, practical for adjusting production according to the bakery's actual needs. 2 drain taps to facilitate draining, cleaning, and daily use of the sourdough. Loading height of 1120 mm, designed for ergonomic use in a professional laboratory. Compact dimensions: 590 x 949 x 1292 mm, allowing for easy integration into a bakery production space. 400 V power supply with a power of 1.6 kW, suitable for a professional three-phase installation. Weight of 200 kg, guaranteeing a robust and stable construction for regular use in a commercial environment. Year 2017, serial number 17200241, reference TL-40. Used professional equipment, suitable for bakers who wish to integrate or develop sourdough production with specialized equipment. Ideal solution for Proculis: a reliable, compact, and functional sourdough fermenter to improve work organization and consistency of preparations. Used Tradilevain TL-40 40 L sourdough fermenter The used Tradilevain TL-40 sourdough fermenter is a professional piece of equipment intended for bakers, pastry chefs, and production laboratories who wish to work with natural sourdough with more regularity, comfort, and organization. Thanks to its maximum usable capacity of 40 liters, it allows for the preparation and storage of a quantity adapted to the daily needs of an artisan bakery or a professional production facility. This model is particularly interesting for professionals who want to incorporate sourdough into their range of breads, improve the consistency of their preparations, or optimize fermentation monitoring. Its compact size, 80-liter tank, and two drain taps make it a practical solution for managing sourdough on a daily basis. Product: used professional sourdough fermenter Brand: Tradilevain Reference: TL-40 Maximum usable capacity: 40 L Minimum usable capacity: 20 L Maximum total capacity: 50 L Minimum total capacity: 25 L Tank volume: 80 L Bdedezyqqqopfx Ahmoh Number of taps: 2 drain taps Loading height: 1120 mm Dimensions: 590 x 949 x 1292 mm Voltage: 400 V Power: 1.6 kW Weight: 200 kg Year: 02/17/2017 Serial number: 17200241

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: LR2009MAHEDEDM100PO1, type of input current: AC, total width: 1,150 mm, total length: 2,850 mm, total height: 1,900 mm, overall weight: 1,100 kg, outer diameter of label roll: 550 mm, inside diameter of label roll: 76 mm, input voltage: 380 V, compressed air connection: 6 bar, For sale is a fully automatic mask machine DM-85-P (CE version) with 380V connection – suitable for masks Type II and IIR. The mask machine is designed to process multi-layer fabrics into various masks by means of forming folds, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask machine Lianrou LR-DM-85-P is a late-generation model and is also a patented product by LIAN ROU. Compared to traditional disposable mask machines, it offers the following advantages: First, the LR-DM-85-P requires only one unit to complete the entire mask production process, which significantly reduces the space required for the production line; second, it features an integrated production design with an aesthetically clean and organized structure. Most importantly, it is equipped with a range of reliable safety features, thus ensuring a safe operating environment for the operator. In summary, this machine stands out for its excellent cost-performance ratio and high reliability. Bodeya Hdbjpfx Ahmjdh Technical data / Notes: Model: DM-85-P Design: Electric-Pneumatic Voltage: 380V Certification: CE Manufacturer’s documentation and wiring diagrams included If interested, please get in touch – viewing by appointment possible.

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: ST-32-004, year of last overhaul: 2025, Viper TL, an advanced automatic packaging system designed to streamline product sorting and loading into Tray & Lid and Wraparound boxes. It is especially suitable for cans, pouches and sliced meat or cheese. This exact VIPER TL is AS NEW, only exhibited few times on international trade shows as DEMO machine. Details about the machine: VIPER TL, capacity 6–10 boxes per minute The types of boxes it can produce: Large tray & lid: LWH 398×354×178 or 143 mm Bedpsx Ttywefx Ahmjdh Small tray & lid: LWH 398×266×178 or 143 mm Lidl wraparound box: LWH 398×354×143 mm The first two are tray & lid (separate box and lid on the outside), and the third is a classic wraparound box that can have perforation for display purposes.

Condition: used, Year of construction: 2023, machine/vehicle number: 200617, functionality: fully functional, Dear customers, To ensure fast and reliable processing of your request, we kindly ask you to contact us preferably by email. This will allow us to assign your request directly to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. Bdedpfx Ahjy Hz Upjmeh We look forward to hearing from you and are happy to assist you! Technical data can be found on the nameplate. Available: immediately, the customer will receive a larger unit. Serial number: 200617 Riedex DM-200/M-B Dust collector Left-hand version, motorized cleaning, with chip container.

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Bsdpfx Aoz Dt Ukohmjdh Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Manufacturer - Damak Makina. Model - DM IP 176. Bjdpex I Sn Njfx Ahmjdh Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps. Please note - the front panel is missing on this machine (as per photos).

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. Bdodpjzrngyofx Ahmjh The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Bdjdjy Aicmspfx Ahmsh Manufacturer - Damak Makina. Model - DM IP 176. Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps.

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min Bdedpfszxz Hgjx Ahmsh feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM6379 Damak conical rounder, used in bread and roll production to shape divided dough pieces into smooth, round balls ahead of proving. Handles pieces from 100g to 600g. Manufacturer - Damak Makina Model - DM CR 2000 Bsdpfx Aey Aidkohmjdh Date of manufacture - 2021 Piece weight - 100g to 600g Capacity - 1,200 to 2,400 pieces/hour Electrical - 415 V / 50 Hz / 3 phase

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Bedpfxszul N Ro Ahmsdh Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA

Condition: used, Year of construction: 2023,

Condition: new, Completely NEW Bjdpfx Ahsy Rm Tljmjdh

Condition: excellent (used), Year of construction: 2003, operating hours: 1,755 h, functionality: fully functional, machine/vehicle number: 090DM00448/01, fuel type: diesel, Dulevo 90 DM Bdsdpfxezkkyto Ahmjh

Condition: ready for operation (used), functionality: fully functional, Iseki TL 2700 ✅27 hp ✅Adjustable 4x4 ✅Power steering ✅High and low gear ✅PTO shaft, 3 speeds 💰€4500 (price excluding VAT) 🚜Delivery and trade-in options available Bjdpfoz Dh E Rsx Ahmjdh Various attachments for sale: Bucket with tipping function Feed scraper Rondini 200 L spreader

Condition: used, Year of construction: 2023, - Parallel guidance - Multi-coupler QC4 (QCS) - 3rd function - SoftDrive - / attachment aid / Bdjdet A Tz Ropfx Ahmoh

Condition: new, Year of construction: 2023, power: 7.5 kW (10.20 HP), intake manifold diameter: 300 mm, Exhibition machine, year of manufacture 2023 Technical data DM-300/P-B Motor power 7.5 kW Nominal volume flow 20 m/s, 5089 m³/h Max. air volume flow 6000 m³/h 2700 Pa at 20.5 m/s in dusty conditions Filter area 31.8 m² Filter cleaning: JET cleaning system Residual dust content: less than 0.1 mg/m³ Bodpfx Ahez At Nhjmodh Dust collection volume: 480 liters Sound pressure level: 70 dB(A) Power supply: 400V/50Hz Nominal current: 14.0 [A] 5 m connection cable with 32A CEE plug, 5-pole, with phase inverter Weight: approx. 780 kg Dimensions (L x W x H), max. 3245 x 1030 x 2595 mm Includes extraction nozzle Extraction nozzle with flange, 300 mm (left) With extinguishing system (no water connection required)

Condition: used, Year of construction: 2021, machine/vehicle number: B740, functionality: fully functional, operating hours: 3,500 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 8,005 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 274 mm, workpiece length (max.): 8,005 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 274 mm, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: CMS, total height: 4,300 mm, total length: 10,500 mm, total width: 4,860 mm, overall weight: 2,200 kg, table length: 9,736 mm, table width: 2,080 mm, high-pressure hose length: 11 mm, water pressure: 4,130 bar, Equipment: CE marking, documentation/manual, We offer this used CMS Tecnocut Smartline machining center, year of construction 2021. Manufacturer: CMS Model: Tecnocut Smartline Year of manufacture: 2021 Condition: used Category ID: 2075 Type ID: 970 Type: machining center CMS Tecnocut Smartline CNC Waterjet Machine. See attached document for accurate dimensions. 8m x 2m steel honeycomb bed, up to 413MPa water pressure. Includes machine (with water tank), HMI & stand, reverse osmosis unit, pre-pressure intensifier (6 bar), CMS JetPower Evo Intensifier (4130 Bar), Clean water storage tank, Filter System for recycling water, Hydrogen Peroxide Dosing System, light guards, spare HP tube & orifice inserts. Bjdpfjz E Rmysx Ahmedh Manuals and machine drawings available upon request. Video showing machine running available on request. If you have any questions or need more information, feel free to send us a message or give us a call. As shown in the photographs, the catch tank shows wear from use, including localised corrosion and small rust-through areas on a few internal support beams; the machine remains operational and inspection is welcome.

Condition: like new (used), Year of construction: 2020, 431 USED Wachtel Freezer, Cooler, and Proofer. The unit is new and unused. EQUIPMENT: 1. Wachtel Copro TL - Freezer, -25°C - 0°C. 2. Wachtel COOLING k - COOLER AND PROFER, from +2°C to 35°C. Bedpjzifpmjfx Ahmsdh EXTERNAL DIMENSIONS (in cm): - Width 1000, - Depth 440, - Height 300. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 2002, Technical details: x-Travel: 600 mm table cross travel (Y-axis): 500 mm w-axis: 250 mm control: Ixion TL-1 x-travel: 600 mm y-travel: 500 mm z-travel: 350 mm drilling depth in one stroke: 600 mm number of spindle speeds: 300 - 6000 /100 - 1600 U/min drill capacity in steel: 3 - 25 mm table surface area: 900 x 500 mm table load: 2000 kg connected load: 10 kVA weight of the machine ca.: 4 t dimension machine approx.LxWxH: 2,0 x 2,8 x 1,9 m The AUERBACH IXION AX1-TL is an industrial CNC deep-hole drilling machine designed for the precise machining of workpieces, particularly for producing deep holes with small to medium diameters. Bdjdpfx Ahoz Dt Sijmeh The machine is equipped with a powerful high-pressure coolant system and is designed for deep-hole drilling with single-lip carbide drills from Ø 3 to 25 mm. The coolant system has a tank capacity of 600 litres, a maximum coolant pressure of 90 bar and a maximum flow rate of 40 l/min. This ensures reliable cooling and efficient chip removal even during deep-hole drilling operations. The worktable measures 900 × 500 mm and is designed for a maximum table load of 2,000 kg. Four longitudinal T-slots provide flexible and secure workpiece clamping. The main spindle is driven by a 4.0 kW AC motor. Two belt-driven speed ranges provide programmable spindle speeds of 300–6,000 rpm and 100–1,600 rpm, allowing the machine to be adapted to different tool diameters and machining requirements. *

Condition: used, Year of construction: 2022, Parallel guidance single clutch QCS 3rd function softdrive loader kmpl Fendt / nature green / Bjdpfx Aett A Uuehmedh