Used Milling Machine - Vertical for sale (65,944)

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Bjdox Nqu Dspfx Ai Aswn Accessories: electron. hand panel, chip conveyor,coolant

Condition: used, functionality: unexamined, machine/vehicle number: BM 86B320, ELBO VISUALIZER - DIVIDING TABLE - VISE Bwedpfoy Ndqxox Ai Asn

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition Bedpfx Aisy Dvnxs Aswn and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2018, x-travel 1300 mm Bjdpsy Aphcjfx Ai Aewn y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2008, x-travel 1800 mm y-travel 510 mm z-travel 480 mm weight of the machine ca. 5500 kg Bwjdpfx Aisxuv Svo Ajn

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm z-travel 625 mm control Siemens Sinumerik 828D weight of the machine ca. 8500 kg Bwedpjyzt Ansfx Ai Ajn

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus Bwjdpey Ralusfx Ai Asn total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: used, Year of construction: 2001, x-travel 560 mm y-travel 460 mm z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t Bwsdpsyi Hv Nofx Ai Ajn

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 16.000 U/min tool taper SK 40 milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. Bedpfxox E Dr Ij Ai Ajwn The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V

Condition: used, Year of construction: 2008, travel -x axis 1.100 mm Bedpfx Aijvzcnno Ajwn travel -y axis 610 mm travel -z axis 610 mm table dimension (L x W) 1.250 x 610 mm tool adaptor SK40 numbers of positions in the tool changer 30 table diameter 250 mm control HEIDENHAIN - iTNC 530 Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. Bsdpsw Dgcaefx Ai Ajwn The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: excellent (used), Year of construction: 2008, x-travel 800 mm y-travel 400 mm z-travel 500 mm Control Siemens table surface area 1270 x 320 mm Bwjdpfoymqwxex Ai Ajn spindle turning speed - stepless 0 - 6000 U/min distance spindle /table 100 - 600 mm throat 510 mm tool taper SK 40 weight of the machine ca. 2,7 t dimensions of the machine ca. 2,2 x 2,0 x 2,5 m

Condition: used, Year of construction: 2003, x-travel 660 mm y-travel 355 mm z-travel 455 mm table surface area 760 X 355 mm table load 1,5 t Bjdpoyy A Anefx Ai Ajwn T-slots 3 T-slot - width 18 mm control ULTIMAX 4 tool change unit 16 max. tool diameter 90 mm max. tool length 200 mm max. tool weight 7 kg spindle turning speed range 10.000 U/min spindle drive 7,5 kW 16 St. tool adaptor SK 40 feed max 28 m/min rapid traverse 35/35/30 m/min dimensions of the machine ca. 1,8 x 1,9 x 2,4 m weight 3 t total power requirement 21 kW Used vertical machining centre with double-arm tool changer. HURO ULTIMAX 4 CONTROL 10,000 RPM

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min Bodpfx Aeyz Dg Dji Ajwn table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Bwodeyw Tm Ejpfx Ai Aen if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 Bjdpfx Aoxxmmroi Aown spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Bjdpfxex Iwg Ds Ai Aswn Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwsdpfox Iwg Rsx Ai Aon Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 300 mm Bsdpfx Aewth Sbei Ajwn y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm Bwjdpfxoh I Du Uo Ai Aon movement y: 250 mm movement z: 410 mm spindle taper: SK 40 tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min electrical connection: 380 V, 5,5 kW space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. Bwsdpfeyvvlusx Ai Aon FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, table length: 1,200 mm, table width: 500 mm, table load: 500 kg, CNC Vertical Milling Machine DEFUM AFM BACA R1000 Vertical milling machine DEFUM AFM BACA R1000 available for sale, suitable for precise machining in both single-piece and serial production. The machine features a rigid construction ensuring stable and efficient operation. The machine is available for inspection upon prior arrangement. Technical specifications: Table: Working area: 1200 × 500 mm Number of T-slots: 5 T-slot width: 14 mm T-slot spacing: 100 mm Max. table load: 500 kg Travels: X-axis (longitudinal): 1000 mm Y-axis (cross): 510 mm Z-axis (vertical): 560 mm Spindle: Tool taper: BT40 Speed range: 45 – 10,000 rpm Tool magazine: Number of tools: 16 + 16 Dimensions and weight: Length: approx. 2950 mm Width: approx. 2300 mm Height: approx. 2750 mm Weight: approx. 4000 kg Bodpfx Aieywvtne Aown Additional information: Transport can be arranged Machine testing possible upon request Technical support and consulting available

Condition: used, Year of construction: 1971, x-travel 2000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain type TNC 430 spindle turning speed range 15-1450 U/min Table area 2300x1200 mm Spindle 200 mm spindle stroke 200 mm Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bodpfx Aijyt R Dxs Ajwn If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles Bwsdpfx Aistuggco Ajn for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2017, x-travel 1200 mm y-travel 600 mm Bwjdpfxsyrt Ano Ai Asn z-travel 630 mm control Heidenhain weight of the machine ca. 7700 kg