Used Millipore Progard Ts2 for sale (134)

Condition: new, Year of construction: 2022, Storage location number: 100552399 Transport dimensions (L x W x H): 0 x 0 x 0 ---- The compressor features a reliable, electronically controlled Cummins engine equipped with an exhaust aftertreatment system (SCRT®) and meets all legal Stage V emission limits according to (EU) 2016/1628. SCRT® system Large diesel and urea tank (AdBlue) Patented pre-compression of compressed air through an additional turbocharger Standard fuel pre-filter with water separator Standard oil temperature control valve to prevent condensate formation User-friendly display Redpfx Ajzkzvxsnkscd Simple adjustment of the operating pressure in 0.1-bar increments Individual fault indication Fast fault diagnosis Yellow rotating beacon Battery disconnect switch as standard Operating weight under 3,500 kg Pressure range: 7 to 24 bar Volume flow: 20 to 27 m³/min Chassis currently disassembled? Version with chassis available on request.

Condition: used, Year of construction: 2022, operating hours: 524 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 946 mm, fuel type: gas, mast type: triplex, construction height: 2,170 mm, fork length: 1,220 mm, drive type: Treibgas, Internal combustion forklift Rjdpfxezhyzus Ankocd Mast type: Triplex Transmission: Torque converter Front tire type: Superelastic Rear tire type: Superelastic Valves with corresponding hose routing, attached side shifter, reversing alarm, lighting system similar to StVZO (German Road Traffic Licensing Regulations), yellow rotating beacon, windshield with wiper, and fixed roof section, newly painted in 05/2026.

Condition: good (used), Circuit breaker, switch, push button Rjdpfxsb A Iaio Ankocd -Type: TS 25/3 0 Awk -Max. 380 VAC Price: per package -6x: Packs of 2 pieces each -Weight: 0.8 kg

Condition: used, Feeler gauge, dial gauge, measuring probe, measuring probe, centering device, centrizer, 3D probe, probe insert, measuring probe, digimatic indicator -Manufacturer: Heidenhain, measuring probe TS 220 . 293 488-07 -Intake: SK50 Rcsdpfx Aneg T Amrskod -Case: with accessories, see photo -Dimensions of the case: 400/195/H140 mm -Weight: 6.4kg

Condition: used, Year of construction: 1994, Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor Rcsdpfxstu Rk No Anksd -Manufacturer: Transnorm, roller curve conveyor 90° with drive -Type: TS 2712 -Rolls: Ø 54-84 x 500 mm -Speed: 24 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2260/1030/H410 mm -Weight: 99 kg

Condition: good (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector Redpfx Ajyf Eb Ajnkecd -Manufacturer: wöhner, fuse-switch disconnector 400 A -Type: LTS-2 -Quantity: 1x load break switch available -Overall dimensions: 310/210/H135 mm -Weight: 3.3 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 38 mm -Load capacity: 2500 kg Rjdpfx Ansdg Sngekjcd -Number: 3x terminals available -Price: per piece -Weight: 15 kg

Condition: good (used), Upper support, upper slide, dovetail guide, cross table Redpfx Anefnxw Tskocd -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 830/610/H300 mm -Weight: 119 kg

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW Rcedpsgl Duzsfx Anked -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Year of construction: 2007, condition: used, Table saw, aluminum profile saw Rcjdpfjd Sm U Rex Ankjd -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table Rcedpefnxxfefx Ankod -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 1080/530/H290 mm -Weight: 121 kg

Condition: used, machine/vehicle number: 2614, Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm -Groove: 12 mm -Dimensions: 320/400/H100 mm Rodpfx Ansd D Nflokscd -Weight: 33 kg

Condition: new, Year of construction: 2026, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Rsdpfx Ansvxhlgekecd Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Disc bore diameter 30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Rcodpjzh Uuijfx Anksd Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Rcodpfx Ajx H N Drsnkod Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Includes manual (installation and operation handbook)

Condition: used, Technical specifications: Maximum dimensions of the glued component: 1800x3000 mm 3 vertical clamping units - top 2 horizontal clamping units - side Hydraulic clamping units Power supply: 400 V Motor power: 2.5 kW Overall dimensions: Rsdpfxjzh U Shj Ankjcd Length: 3750 mm Width: 1200 mm Height: 2500 mm

Year of construction: 2019, condition: good (used), fuel type: electric, EZGO RXV Golf Cart, Electric, 4-Seater, 2019, Including Charger A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Rcedpfx Aezd Exdonked Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. Rcjdpfx Asi Ri N Asnked A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Redoyiptqjpfx Ankjcd Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Rjdpei Ri Nxofx Ankjcd Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!

Condition: used, Wegoma table saw machine offered. Type: TS 250 Rodegmb Agepfx Ankscd For more information call us or send an e-mail.

Condition: used, Schuster NF2 / MLTS 2000 – Automatic machine for finishing the ends of grooves Manufacturer: Schuster Präzision Type: NF2 / MLTS 2000 Year of manufacture: 1996 Electronics modernized: 2015 Technical data: Length approx. 8,000 mm (incl. coolant system and chip conveyor) Width approx. 2,400 mm Height approx. 2,500 mm Weight approx. 13,000 kg Connection voltage: 400 V / 50 Hz Connection power: approx. 57 kW Compressed air requirement: approx. 50 m³/h Machine description: The machine offered is a highly productive special machine for the automatic machining of groove profiles or grooved workpieces. The system combines several machining and testing steps in an automated production process. Equipment according to machine card: Centering unit End machining, insert end Circular groove milling unit 90° rotary unit Trapezoidal groove milling unit Deburring unit for grooves Saw unit End machining, shaft Deburring, insert end Testing/deburring unit Embossing unit Additional data: Coolant tank approx. 350 liters Hydraulic tank approx. 400 liters Special features: Electronics comprehensively modernized in 2015 Complete enclosure of the machining system Automated material flow Several machining stations within one machine Series production with high repeatability Integrated deburring and testing devices The machine comes from ongoing production and was designed for the machining of workpieces with circular and trapezoidal grooves. Due to its special design, it is particularly suitable for users with a corresponding manufacturing task or for adaptation to similar machining processes. The feed magazine for the raw parts has been dismantled and is not included. Inspection: An inspection under power is possible by appointment. Machine location: Bremen Loading: Dismantling/loading by the buyer. _____ Redpfx Aszcgpvjnkscd Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial users and without warranty.

Condition: ready for operation (used), Indramat MAC 071B-0-TS-2-C/095-A-1/S001 permanent magnet synchronous motor, serial number as shown in the photo, used, with significant signs of wear, 100% functional, scope of delivery as per photos. Rsdpfsi D Ihfsx Ankocd

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Rcsdpfxsur A Uxe Ankod

Condition: used, first registration: 07/2002, loading space length: 7,300 mm, loading space width: 2,400 mm, loading space height: 2,500 mm, * Schmitz refrigerated swap body box * Thermoking TS200 * Portal doors * Diesel/electric * Unladen weight 3,700 kg Rcsdpfx Asw Tgvkenked * Dimensions approx. L7.30 m x W2.40 m x H2.50 m