Used Ms-Maschinenbau Rsa 10 for sale (31,633)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs Bledpfx Ajfi Nmuef Roh available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: good (used), Year of construction: 2007, lifting height: 8,000 mm, fuel type: electric, Empty weight: 2.160 kg Working height: 1.000 cm CE mark: yes Bjdpfxjy Ulxhe Af Rolh Technical condition: good Visual appearance: good Please contact Bas Sindorf for more information

Condition: excellent (used), Compressor SCHNEIDER UNM STS 660-10-270 XDK – used – Tank with powder coating, including refrigerant dryer Bledpfoyyzrbex Af Roh ----- Technical data ----- Tank capacity: 270 litres, Number of cylinders: 1, Maximum flow rate: 660 litres, Effective delivery: 520 litres, Maximum pressure: 10 bar, Motor: 4 kW, Speed: 2,895 rpm, Dimensions (LxWxH): 900x800x1850 mm Quality information: - thorough basic cleaning performed - electrics tested - immediately ready for operation

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 Blsdpsyh Hp Refx Af Rsh -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: used, mileage: 246,914 km, power: 114 kW (155.00 HP), first registration: 12/2000, fuel type: diesel, empty load weight: 5,860 kg, maximum load weight: 1,630 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: cabin, * German vehicle * Condition, see photos * Ruthmann TK170 * 9.500,--€ were currently invested * Working height 17.30 meters * Lifting height 15.30 meters * max. lateral reach 10 meters * 2-fold telescopic lift arm * Work basket with control panel * Load capacity 200 kg * 4 hydraulic outriggers * Long cab with rear window * Manual gearbox * Comfort driver's seat, air suspension * Heated mirrors * Roof hatch * Rotating beacons * Fire extinguisher * Leaf suspension * Differential lock * Complete documentation available * Free entry to all environmental zones * Since the vehicle can be registered as a self-propelled work machine (green license plate), it is exempt from vehicle tax and environmental badges * Wheelbase: 3600 mm Bsdpfx Asvhphbef Rjlh * GVW: 7,490 kg If new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm Blsdpfxevut Rao Af Reh material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard video at seller's site before dismantling available

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. Bledey Rdnaepfx Af Rjh We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: new, working width: 400 mm, area performance: 400 m²/h, overall weight: 35 kg, water tank capacity: 10 l, KARCHER BR 40/10 C ANNIVERSARY EDITION SCRUBBERS TECHNICAL DATA: Model: BR 40/10 C ANNIVERSARY EDITION Manufacturer: KARCHER Catalog number: 1.783-343.0 Type: Compact scrubber Country of manufacture: Germany Series: Professional Number of brushes in the set (pcs): 2 Drive type: Mains powered Brush working width (mm): 400 Working / vacuuming width (mm): 400 Water tank: clean / dirty (l): 10 / 10 Theoretical area performance (m²/h): 400 Practical area performance (m²/h): 300 Brush rotation speed (rpm): 1100 Water consumption (l/min): 1 Sound pressure level (dB(A)): max. 75 Voltage (V / Hz): 220 – 240 / 50 Weight without accessories (kg): 35.5 Dimensions (L × W × H) (mm): 520 × 470 × 1150 Blodpexzfavofx Af Roh KARCHER BR 40/10 C ANNIVERSARY EDITION EQUIPMENT: 2 x Standard cylindrical brush 2 x Hard cylindrical brush 2 x Transport wheel 2 x Straight squeegee (rubber bands) ADDITIONAL FEATURES: Two-tank system 230V mains power supply Variable brush pressure WHY CHOOSE KARCHER BR 40/10 C ANNIVERSARY EDITION KARCHER BR 40/10 C ANNIVERSARY EDITION SCRUBBERS? Celebrating Kärcher's 90th anniversary, the BR 40/10 C Anniversary Edition scrubber in black is a flexible option for a variety of applications. It scrubs and vacuums quietly in both directions. It features a foldable push handle and removable tanks, which are easy to transport thanks to the locking carry handle. The brushes and squeegees can be easily changed in seconds without any tools. The Anniversary Edition set also includes two orange double-bristled brushes.

Condition: ready for operation (used), Year of construction: 2000, Two complete blister packaging lines from the pharmaceutical industry are available. 1.1) Automatic case packer IMA CP 28 BA, year of manufacture: 2000, min. carton dimensions X/Y/Z: 220mm/120mm/120mm, max. carton dimensions X/Y/Z: 600mm/400mm/350mm, output: 8cartons/min, machine dimensions X/Y/Z: approx. 4900mm/1900mm/2650mm, weight: approx. 1500kg. 1.2) Bundle wrapping machine IMA BFB MS 300 A with stretch banding, year of manufacture: 2005, bundle length range: 20mm-360mm, bundle width range: 55mm-220mm, bundle height range: 55mm-220mm, output: approx. 40bundles/min, max. film roll diameter: 300mm, machine dimensions X/Y/Z: approx. 2900mm/1300mm/1950mm, weight: approx. 1500kg. 1.3) Mini robot. Overall line dimensions X/Y/Z: 10750mm/2350mm/2250mm, transport weight 1/2: approx. 4700kg/5000kg, total weight: approx. 10000kg. Without shrink tunnel. 2.1) Blister packaging line IMA Giant 1 BH 100 A, year of manufacture: 2006, products: tablets/capsules, design: modular, max. packaging output: approx. 350blisters/min, max. blister dimensions X/Y/Z: 90mm/145mm/12mm, max. carton dimensions X/Y/Z: 100mm/155mm/105mm. Line dimensions X/Y/Z: approx. 7100mm/1300mm/2250mm. Documentation available. An on-site inspection is possible. A package sale is preferred. Expected to be available from October 2026. Bljdpfx Asy I Acqjf Rjh

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Bjdpfeyhbt Hjx Af Rolh Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Electrode force: 65-390daN / single stroke Blodpfsy Ez I Hex Af Rsh Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Dalex Works Pms 10-2 Bljdpfxeg Rcpxj Af Roh 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V electrode force: 65-390 daN Machine weight 341 kg

Year of construction: 2015, condition: used, UniMaster STS 660-10-270 - Year of manufacture: 2015 - Including oil-water separator OWS-Öwasep 1 - Including condensate drain Ecomat 3100 With soundproof enclosure, extremely quiet operation Equipped with refrigerated dryer and bypass line Bjdpfsyzc R Uex Af Rslh V-belt driven, two-stage, 2-cylinder piston compressor Fitted with rubber vibration isolation mounts for secure placement With intercooler and aftercooler Easily accessible condensate drain valve Additional ports with blanking plugs for easy system expansion (except for the 90 l receiver) Air outlet 3/4" Space-saving vertical design Flexible upgrade options: retrofit soundproof enclosure (for compressors with 4 kW) and/or refrigerated dryer as required Easy and cost-effective vessel inspection through handhole opening Technical Data: Max. pressure: 10 bar Intake capacity: 660 l/min Effective delivery rate: 520 l/min Drive power: 4 kW Speed: 1025 rpm Tank capacity: 270 l Weight: 170 kg Noise level: 78 dB[A] Air outlet: 3/4" internal Dimensions (W x D x H): 750 x 705 x 1800 mm Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 unit used robot Manufacturer: FANUC Model series: M-10iA/10MS Type: A05B-1221-B902 Bedpsynuwxefx Af Rslh Year of manufacture: 2019 Max. reach: 1,441 mm Payload capacity: 12 kg The version is suitable for food-grade applications. Currently, the robot is installed in a production cell. You can purchase the robot with or without the production cell. The robot was in operation for only one year.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 1.0 pc. used robot Manufacturer: FANUC Series: M-10iA/10MS Bljdpfx Aeynuvhef Roh Type: A05B-1221-B902 Year of manufacture: 2018 Max. reach: 1,441 mm Payload: 12 kg The design is food-grade compliant. Currently, the robot is integrated in a production cell. You can purchase the robot with or without the production cell. The robot was in operation for only one year.

Condition: new, neu Bulgarien 85520 € 1616.33 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 M 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 71 280,00 turning length2.000 mm € 74 190,00 Bsdpfx Aoyq Sn Tsf Rslh turning length4.000 mm € 91 680,00 turning length5.000 mm € 104 390,00 turning length6.000 mm € 1 230,00

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Secondary short-circuit current: 24 kA Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg with mounted control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Bledpfx Asyh Hlxsf Rjh Sample photo Machine is currently being refurbished.

Year of construction: 2023, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Intermercato TG 22 PRO-SR5 Grapple Saw / 5-Tine Grapple / incl. MS08 Adapter Plate / in stock & immediately available / Year of manufacture: 2023 Price: €10,890.00 net / €12,959.10 gross - Weight (kg): 156 - Cross-sectional area (m²): 0.20 - Max. operating pressure (bar): 200 - Oil flow (l/min): 50 - Closing force (kN): 11.6 - Excavator class: 4–10 t - Grapple opening width (mm): 1,225 - Max. capacity (kg): 3,000 Equipment: - incl. MS08 adapter plate - incl. hydraulic hoses as shown in photos We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) for immediate delivery. Our warehouse offers a very large selection of various grapples, all immediately available! Mr. Herden is happy to assist you (by phone at ...). Upon request, we will gladly provide you with a financing offer. We are an official sales and service partner for DMS, Holp, OilQuick, Westtech, Weber MT, Magni Telehandlers, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. In addition, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Bedpfxjyii Ufo Af Rolh We supply the complete Intermercato range! !!Errors and prior sale excepted!! Internal ID: 3068 = Further information = New: No Empty weight: 156 kg Suitable for: Forestry applications Please contact Marius Herden for more information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & available immediately Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher attachment for excavator mounting, suitable for mulching along riverbanks, in forests, next to railway tracks, and other hard-to-reach areas - Mulches bushes and wood up to 20 cm diameter - Suitable for excavators from 10-20 tons Bsdpfxsyii T Ie Af Rolh - Compatible with various mounting plates - Drive designed for hydraulic motor depending on carrier’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pieces, spare part number 176.02.005 OPT 465 M-BOOST Bent-axis piston motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood A separate hydraulic unit is recommended for operation. The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses, couplings, and mounting plate. We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone) is happy to assist you. We are happy to provide a financing offer upon request. We are official sales and service partner for Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Empty weight: 780 kg Please contact Marius Herden for further information...

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone ). Lehnhoff Grading Bucket / CP 10 45° / Variolock-VL80 / incl. MS08 Coupler / 1,200 mm cutting width / Year: 2022 / unused Price: €2,090.00 net / €2,487.10 gross - Excavator class: 8 - 10 t - Own weight approx.: 260 kg - SAE capacity: 290 litres - Cutting width: 1,200 mm Featuring a forward drawn blade, double-conical sidewalls, and optimized trapezoidal design, this Lehnhoff grading bucket is ideal for levelling and subgrade works. - Bevelled corners - Long, flat bottom and LH double-conical construction - Optimal penetration and fuel savings - Good emptying properties Bedpfx Afsyii Raj Rslh We have a very large selection of various buckets in stock and immediately available! Just contact us at / . We are happy to provide you with a financing offer upon request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official OilQuick telehandler sales and service partner. We are an official Weber MT telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Errors and prior sale reserved! Internal no.: 302439 = More information = New: Yes Application: Construction Empty weight: 260 kg Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2010, MANUFACTURER: BRAND MODEL: MSC37/10 SERIAL NO.: API200079 YEAR: 2010 POWER (kW): 37 CAPACITY (m3/min): 6.70 PRESSURE (bar): 10 Bledpfx Afeylbd Tj Reh

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Bledpfx Afevuz N Rj Rsh Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: used, Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused Bodotuycgspfx Af Relh -Type: 0313 D 2.0 NBA MS -ID No.: 00061096 -Voltage: 18-33 V -Number: 191x valve available -Price per piece -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece

Condition: good (used), MIG/MAG hose package extension, intermediate hose package Blsdpfeucmpyox Af Rsh -Welding cable: extension / connecting cable -Length: 10 m -Version: Dinse plug, gas hose, control cable -Connector: 14-pin -Transport dimensions: 620/600/H160 mm -Weight: 14.8 kg

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Blsdoqyq Nqspfx Af Rsh