Used Nico Duin Frame Press for sale (21,811)

Condition: reconditioned (used), Year of construction: 2014, Working width 4000 mm Iiodpfxjzpblks Apheh Working height 2550 mm Number of cylinders 6 St. Dimensions (L/W/H) 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for "mortise and tenon" corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550* mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure plates (for triangular/pointed windows) - Surcharge for minimum dimensions - All pressure plates and abutments faced with plastic - Control cabinet located on the inside of the left base leg - Press can be completely disassembled if required (price on request!) - Finish: RAL 7035 Light Grey and RAL 7016 Anthracite Grey (Technical specifications provided by the manufacturer – subject to change/no guarantee)

Condition: used, Frame press ORMA EUROPA Line voltage 380 V - 50 Hz Control voltage, magnetic components, lamp 110 V Main protection 3 x 25 A Iiedpewudzbjfx Apheh

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Iijdpfxsk S Htxj Aphjh Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Pressure system: electrohydraulic Press pressure: per cylinder Cylinder stroke: mm Iiedpfxoy A Hkze Apheh Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Iiedpfelqxg Hjx Apheh Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, total length: 1,400 mm, total width: 900 mm, total height: 2,150 mm, SPECIAL OFFER – 5% DISCOUNT! MTP C-FRAME HYDRAULIC PRESS – 1000 KN / 102 T Professional MTP hydraulic press with a pressing force of 1000 kN (approx. 102 t), designed for demanding industrial operations such as pressing, straightening, bending, assembly and forming of metal components. The open C-frame design provides excellent access to the working area and facilitates easy positioning of workpieces. The robust welded steel construction ensures high rigidity, stability and durability during operation. Iodpfx Apoyrr Rkeheih The hydraulic system provides smooth and precise ram movement. The machine is suitable for manufacturing plants, metalworking workshops, tool rooms, maintenance departments and the automotive industry. KEY FEATURES: • Pressing force: 1000 kN (approx. 102 t) • Open C-frame construction • Robust welded steel frame • Hydraulic drive system • Smooth ram operation • Large and easily accessible working area • Designed for industrial applications • Brand new machine • CE compliant TECHNICAL DATA: • Pressing force: 1000 kN (approx. 102 t) • Maximum working pressure: 25 MPa • Maximum opening: 600 mm • Ram stroke: 300 mm • Working table dimensions: 700 × 500 mm • Throat depth: 250 mm • Downward speed: 11 mm/s • Return speed: 25 mm/s • Motor power: 5.5 kW • Machine dimensions (L × W × H): 1400 × 900 × 2150 mm • Machine weight: 2200 kg APPLICATIONS: • Pressing and fitting operations • Straightening • Bending of metal components • Assembly work • Metal forming • Tool room and workshop operations • Industrial production • Maintenance operations TRANSPORT & WARRANTY The machine is brand new and covered by a 12-month warranty. We provide spare parts, warranty service and professional after-sales support. We can arrange professional transport throughout Europe using experienced industrial machinery carriers. The machine is properly secured for transport and can be delivered directly to the customer's specified address. We can also arrange international transport and shipment to countries outside the European Union. METAL TECHNICS POLSKA Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We provide technical advice, spare parts and comprehensive after-sales support. Contact us for the current price, machine availability, transport costs or an individual commercial offer.

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Iedez S Utlepfx Apheih Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Isdpfeuctlnex Aphsih Price 1250 Eur (EXW Jonava, Lithuania)

Condition: used, used Brand: Maweg Type: RPV Machine no.: 74019 Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Working height 2480 mm Press depth 100 mm hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Iijdpfewqg R Rjx Aphoh Handover in as-is condition as inspected without guarantee and warranty

Condition: new, Working width 3000 mm Working height 2000 mm Number of cylinders 5 St. S&S Frame Press, Type RP 3000 ----- Working width: 3000 mm Working height: 2000 mm Item 1 S&S FRAME PRESS Type RP 3000 Item 2 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 Shut-off valve on the 1st vertical cylinder Item 4 Shut-off valve on the 3rd vertical cylinder Item 5 Shut-off valve on the upper horizontal cylinder Item 6 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression; lower abutment on two levels. Vertical press cylinders mounted on special pressure beams with one-handed quick-adjustment and weight compensation, height-adjustable in 50 mm hole spacing; long sliding carriages ensure the long-term absorption of high pressing forces. Quick, smooth width adjustment via a ball-bearing-mounted carriage with central locking, fixed at 50 mm intervals. Upper horizontal press cylinder infinitely height-adjustable and fitted with weight compensation. Lower horizontal press cylinder with centring bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Pressure plate and support width 130 mm Electro-hydraulically controlled machine, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and one-hand quick-adjustment, 2 horizontal pressure cylinders d = 40 mm, stroke 80 mm double-acting, with weight compensation; 2 manual control valves, pressure gauge, 1 pressure regulating valve from 20 to 150 bar (corresponding to 400 to 3000 kg) vertical pressing force, with a 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Iiedpfjz Sd Dbox Aphoh Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working dimensions: 3000 mm x 2000 mm (length x height) ----- Price of the above machine on enquiry! ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Further options available on request. Please contact us for the full price list! ----- (Technical data as per the manufacturer, subject to change; the illustration may show optional equipment!) The images show a similar model. Original images are not yet available.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, reverse speed: 18 mm/s, pressing force: 51 t, pressing speed: 18 mm/s, stroke length: 200 mm, table length: 500 mm, table width: 400 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! Hydraulic C-Frame Press The Hydraulic C-Frame Press is a professional industrial machine designed for precision pressing, bending, straightening, assembling and forming operations. Its open C-frame design provides excellent access to the working area, making it easy to handle larger workpieces and operate from multiple sides. The robust welded steel frame ensures outstanding rigidity, durability and reliable performance, while the hydraulic system provides smooth, accurate control of pressing force and ram movement. Suitable for continuous industrial use, this press is ideal for production facilities, maintenance departments and metalworking workshops. Main Features • High pressing force • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Easy access to the working area • Reliable industrial performance • CE certified Technical Specifications • Pressing force: 500 kN (approx. 51 t) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 19 mm/s • Return speed: 18 mm/s • Motor power: 4 kW Applications • Press fitting • Bending • Straightening • Assembly operations • Forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Ijdpfxjyr D R No Aphjih Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Iisdpfx Ash Uhqysphjh Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Year of construction: 1990, used manufactured by Steton type SOPE built in 1990 cylinder horizontal 3 cylinder vertical 3 working width 3050 mm working height 2050 mm hydraulic required space ca. l x w x h mm Ijdpfxjvwfa Eo Aphjih 4100 x 1300 x 2600 weight ca. 1500 kg total connected power 2.2 kW located in 97447 Gerolzhofen sale in current condition

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Ijdpfx Aperunu Ijhsih

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. Iisdpfxjznv A Uo Aphoh • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition! Iijdoz Rn Sfopfx Aphjh

Condition: excellent (used), Year of construction: 2007, Window fitting press Ijdjt T Srpspfx Apheih

Condition: new, Year of construction: 2023, Press area: 3000 mm x 1800 mm Number of manual hydraulic cylinders, vertical: 4 Number of manual hydraulic cylinders, horizontal: 2 Iijdpjiwfhwjfx Aphsh Pressing force: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive Iiodpfx Apezrpt Ujhoh with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Iedpfx Aexrnvbephoih Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Iodpfx Asz Irbqopheih Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iijdpjrffm Nofx Aphjh On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4-4 Frame SBG Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Iodpfx Aporffm Tshoih

Condition: used, Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4-1 Frame KSB Cylinder Iisdpfxorffmwe Apheh Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Schließrahmen - Letter Press Frame Adast GP Tiegel-1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video Isdpfx Asrffniephoih We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test