Used Nimo-Kg Meat Bin Lifter for sale (67,505)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Laodpfeyz Af Ejx Am Nea Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 2020, condition: used, functionality: fully functional, We offer these used KD pipes, diameter 315 mm, KG 2000 KG wastewater pipes, green, year of manufacture 2020. Approx. 70 m in total, pipe length 5 m, including various bends, Y-pieces, etc. Temperature range: -20 to 90 °C Sealing material: rubber rings according to DIN EN 681 Color: May green RAL 6017 Material: Polypropylene (PP) Ring stiffness SN: 10 kN/m² Tightness (guaranteed up to): 7.0 bar Chemical resistance (pH range): 2 to 12 pH Thermal conductivity: 0.04 W/(K·m) Coefficient of linear expansion: 0.08 mm/(m·K) Short-term modulus of elasticity: 2500 N/mm² Long-term modulus of elasticity: 450 N/mm² Lodpfxjyyml Tj Am Nsaa If you have any questions or need further information, feel free to send us a message or call us.

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Lajdpjxmt H Iefx Am Nea

Condition: excellent (used), Load capacity approx.: 2 t Fork length: 770 mm Lsdpfx Amsd D U Uae Njaa Fork gap: 105 mm Fork width outside: 400 mm Total length: 1100 mm

Condition: good (used), Wilhelm Haarmann KG, DM PU, Grinding machine Lajdpfobq Syyex Am Nja

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Lsdpjyw Ua Tsfx Am Noaa Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N Laodpfx Ajyupd Hom Noa - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Lodpfx Amjw R S S Ee Neaa

Condition: excellent (used), For sale: professional granite surface plate (marking-out plate) used in quality control and tool rooms. The plate is made of high-quality technical granite, ensuring excellent dimensional stability and wear resistance. Ideal for precise measurements, marking out, and component inspection. The unit is mounted on a robust steel stand. The equipment comes from an industrial facility. ⸻ Ledpjyuqtpjfx Am Neaa Technical specifications • Type: surface plate / marking-out plate • Material: technical granite • Plate dimensions: approx. 1600 × 1000 mm • Thickness: approx. 200 mm • Weight: approx. 1014 kg • Base: steel construction The plate has a Trescal calibration sticker. ⸻ Applications • quality control • tool rooms • CNC industry • precision measurements • marking out components

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm Lsdpfjyt Nm Sjx Am Nsaa MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: good (used), Year of construction: 2014, Manufacturer: DEMAG Load capacity: 860 kg + 630 kg (equipped with two cranes) Exact technical dimensions are shown in the pictures. Lajdpfeyu R Dzox Am Nsa The crane runway can be extended using the structures and supports shown in the pictures; however, additional track elements are required for the extension, which are not available!!

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Laodpsyplwfofx Am Nja Your service team at Mertens & Frowein GmbH

Condition: like new (used), functionality: fully functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg with hand and double-foot remote control Lasdjwd Twqjpfx Am Nsa CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) Lsdeynz Idjpfx Am Njaa - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: Lajdpfx Asynr E Tsm Nja - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable Laodpfx Aeynr E Hom Nsa - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany Lasdpoynr Emjfx Am Noa

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control Lajdpfx Amjyrh I Ej Nsa • Condition: very good, normal signs of use

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Laedpeyml D Hefx Am Nja Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: new, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid pattern: 5,000 x 6,000 mm - Finished floor height: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard, P6 quality - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanine platforms are expandable in the specified grid as standard. Other sizes and heights available upon request. Our team will be pleased to advise you! Delivery scope: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Sample prices: 30 m² | Dimensions: 5,000 x 6,000 mm | €2,685.00 net, excl. shipping and VAT 60 m² | Dimensions: 5,000 x 12,000 mm | €4,785.00 net, excl. shipping and VAT Lodpoxpizajfx Am Njaa 90 m² | Dimensions: 5,000 x 18,000 mm | €6,855.00 net, excl. shipping and VAT 120 m² | Dimensions: 5,000 x 24,000 mm | €8,955.00 net, excl. shipping and VAT 60 m² | Dimensions: 10,000 x 6,000 mm | €4,785.00 net, excl. shipping and VAT 120 m² | Dimensions: 10,000 x 12,000 mm | €8,645.00 net, excl. shipping and VAT 180 m² | Dimensions: 10,000 x 18,000 mm | €12,495.00 net, excl. shipping and VAT 240 m² | Dimensions: 10,000 x 24,000 mm | €16,335.00 net, excl. shipping and VAT Further versions available. Please contact us for more information. Optional accessories: - Guard railing - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing available at extra cost YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MADE-TO-MEASURE MANUFACTURING This mezzanine platform represents an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your business requirements—tailored to surface area, load-bearing capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer tailored to your specifications. Whether new construction, expansion, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for pick-up. Delivery or shipping is available at additional cost. Additional charges are based on the delivery location and the volume of the shipment and can be requested individually from us. PAYMENT TERMS Payment conditions will be agreed upon in the event of an order. The quoted price is the unit/net price, or as stated in the description (plus VAT). You will of course receive an invoice indicating VAT. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, mezzanine platforms, textile racking, as well as machinery for trade, industry, and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands on favorable terms. If you have any questions, feel free to contact us. ✅ Four wins—the success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT Laedpfexpic Rox Am Nja 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The mezzanine platforms can be extended within the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Support columns - Main and secondary beams - Cross bracing - Flooring - Fixing materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus transport and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus transport and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus transport and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus transport and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus transport and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus transport and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus transport and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus transport and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus transport and VAT Ledexpii Rjpfx Am Neaa 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus transport and VAT Other configurations available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer based on your specifications. Whether a new build, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the product. This item is available for collection. Delivery or shipping is available at additional cost. Extra charges depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms to be agreed upon when ordering. The price is quoted per unit/net price or as stated in the description text (plus VAT). You will of course receive an invoice indicating VAT. ✅ Four wins – The DLK success factors – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid spacing: 4,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: 38 mm particle board P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Lsdpsxpha Iofx Am Nsaa EXAMPLE PRICES: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport costs and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport costs and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport costs and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport costs and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport costs and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport costs and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport costs and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport costs and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport costs and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport costs and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport costs and VAT 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport costs and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact guard - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ TAILOR-MADE DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended field of use. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional charges depend on the place of delivery and consignment scope, and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The price is quoted as a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveying technology, mezzanines, textile storage, as well as machines for trade, industry, and crafts. ✅ Four winning pillars – The building blocks for DLK's success – Storage technology | Levelmaker® | Logistics | Solutions

Condition: used, functionality: fully functional, power: 0.48 kW (0.65 HP), input voltage: 380 V, input current: 2 A, Equipment: rotational speed infinitely variable, We offer this used Hubert+Moser KG 80KF3 band saw, year of manufacture unknown. Lajdpfxsymflqo Am Nea If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Ljdpjhxvuwofx Am Neaa Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition