Used Niro Aeromatic-Fielder Pp1 for sale (132)

Condition: good (used), Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit Lsdpfjutuwhjx Am Neaa -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Laedpeu Nwxbofx Am Nea Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. *

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Lajdpfji D Ukusx Am Noa

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Lsdpfei D Uitex Am Njaa

Condition: ready for operation (used), Parker PRM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% functional, scope of delivery acc. photos Lsdpsi Ecc Rofx Am Neaa

Condition: ready for operation (used), Parker PRPM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% working, scope of supply acc. photos Lajdei Ecc Uepfx Am Nea

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system according to EN16500. Lasdpfeu Aa Tnjx Am Nea All spare parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Model: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of strapping channels: 4 Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Includes starter set of bale strapping, 19 mm Year of manufacture: 2004

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The indicated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and fitted with a new control system in accordance with EN16500. All replacement parts used are genuine Strautmann original parts. Technical specifications: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 Lajdov Rzwmspfx Am Nea - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 600 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales per hour - Number of strapping channels: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: indoors / outdoors under cover - Including start set of 19 mm baling tape - Serial number: 610.01.588 - Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Laedsx I A Hpspfx Am Nea Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Ledpfx Aoi D Uh Ijm Njaa

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:B7952 ,unused in opened original box, 100% working, scope of supply according to photos Lodpfxji Ec Dus Am Neaa

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:Z6653 ,unused in opened original box, 100% working, scope of supply according to photos Lsdpfei Ec D Ajx Am Nsaa

Condition: ready for operation (used), Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:X5017, used, normal traces of use, 100% functional, scope of delivery acc. photos Lajdpfx Amji Ec Dxs Noa

Condition: excellent (used), Offered is a cutter Fa. Alexanderwerk Nirocut NCM 65 Complete V2A The machine is fully functional and ready for immediate use. Connection 400v. 15/20Kw. Measuring shaft 2 - gear 1800/3600 rpm. Bowl V2A 2 - speed 9/18 rpm. 2 x mixing gear forward and reverse. 4 cutter head. Plug ready. More on request. Cash or prepayment! Sale only to traders, no guarantee, no warranty. Ljdpfsp R I Nhex Am Njaa

Condition: used, mileage: 16,253 km, power: 81 kW (110.13 HP), first registration: 10/1970, fuel type: diesel, empty load weight: 15,900 kg, maximum load weight: 100 kg, overall weight: 16,000 kg, axle configuration: 4x4, wheelbase: 2,750 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: none, number of seats: 2, Equipment: all wheel drive, cabin, crane, * German vehicle * 1st hand * Condition, see photos * Complete documentation available * Truck-mounted crane from premium manufacturer Krupp * Type GTT 12/Super * Hook height 16.5 m * lateral outreach 13 m * 12 t. lifting capacity * 2 hydraulic extensions * Length 13m = 1.4 t * 9.75m = 2 t. * 5.6m = 4.5 t. * 4m = 8.5 t. * 3.3m = 12 t. * 4 times hydraulically supported * Crane rope with hook block * on 4x4 all-wheel drive chassis * Wheelbase: 2,750 mm * Clear working thanks to fully glazed work/driver's cab * Swivel seat * Differential lock * 5-speed transmission * Leaf suspension * Deutz engine type F6L912 6 cylinder * GVW: 16,000 kg * Self-propelled working machine If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Laodpovhpxmofx Am Nsa Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), The following components from B&R Automation are for sale: - Power Panel 120 Lodpfxsrt T Aws Am Noaa - CPU CP476 Both were removed in 08/2022 and have worked without any problems to date.

Year of construction: 2013, condition: good (used), sprue picker Hahn PP 15 x=100 Y= 1000 Z= 90° year: 2013 price: 2.750 € Laedoi Ikzijpfx Am Nja contact: Mr. Rainer Eckerle

Year of construction: 2016, condition: ready for operation (used), Vibratory plate Wacker Neuson WPP 1540AW, year of construction 2016, 86 kg, petrol, water tank, ser.no.30119556 Ljdpof A Nwlefx Am Nsaa

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Lasdpfx Ajffh Atjm Nsa Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection Lodstpnm Uopfx Am Nsaa CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 2,030 kg, fuel type: diesel, tank capacity: 250 l, color: white, output current: 217 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 165 kW (224.34 HP), continuous power: 150 kW (203.94 HP), total length: 3,200 mm, total width: 1,050 mm, total height: 1,750 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 150 (150kW - 165kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 150R SZR - Maximum power - 165 kW / 200 kVA - Rated power - 150 kW / 188 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Genset condition - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - 6RT80-176DE-TURBO (British Series). Fuel Type - Diesel (Diesel) Combustion: - 33.0 liters per hour (at 75% of maximum power) - 24.0 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 9700 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳POWER: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274G 400V rated power - 150000 watts (150kW / 188kVA) Maximum 400V power (up to 15 minutes) - 165000 Watt (165kW / 200kVA) Rated power 230V - 50000 Watt 230V maximum power (up to 15 minutes) - 55000 watts Rated current (400V) - 217.0 A Current protection - C16, C32, main - 250A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 250 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions - 105 x 320 x 175 cm Gross weight - 2030 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 100Ah Ledpfxetp I Ipe Am Nsaa Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, empty load weight: 104 kg, maximum load weight: 646 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,526 mm, loading space width: 1,116 mm, loading space height: 777 mm, loading space volume: 1.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004173 Low loader Garden Trailer 150 with high frame and high tarpaulin for cars, 150 x 106, 750kg Lodpfoir H Sbjx Am Neaa The low loader with high frame and high tarpaulin that you can connect to any car with a class B driving license. The low-loader has a tiltable drawbar, which makes it easier to load and unload transported goods, especially bulk goods. The compact size of the loading area of 150x106 cm makes maneuvering with the low-loader attached to the hook child's play. Larger purchases, new furniture or household appliances or consumer electronics will not be a challenge for you if you have a low-loader. When you buy a low-loader with high frame and high tarpaulin from UNITRAILER, you get the following: * Fully folding drawbar to place on the rear dropside in a low garage or under the house * Vehicle with very comfortable loading and unloading of goods, which is possible by tilting the loading area * ZGG documents adapted to your vehicle * simple and easy registration procedure thanks to all required documents - invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate * Optional extras - jockey wheel, additional drop sides, anti-theft device * Support from our experts, who will be happy to answer any questions you may have. Options for the Garden Trailer 150 low loader: * Storage on the rear dropside - the low loader in a vertical position takes up very little space, and the broken drawbar means it does not require a high ceiling * High tarpaulin with 80 cm high bows - protect the load from rain, snow, wind and sun and ensure safety in all seasons * Plastic mudguards - very high durability without corrosion * GVW values up to 750 kg - loading area of the low loader with compact dimensions * Corrosion resistance - made of galvanized sheet steel ensures long-term corrosion resistance of all metal elements used in the low-loader * Transport independence - you can carry it what you want and where you want without having to use a car rental or destroy your car Delivery costs are charged additionally.

Condition: ready for operation (used), Linear robot, Hahn Automation Propicker PP 1.5A, used machine Manufacturer: Hahn Laodpfxoxh D Uxj Am Nsa Type: Propicker PP 1.5A Dimensions: 640 × 300 × 1400 mm Year: 2010 Electrical data: 240 V; 6 A

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Laodowmfyvspfx Am Nja Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: used, Siemens Push Button Panel PP17-II 6AV3688-3ED13-0AX0 RA2393 Manufacturer: Siemens Components: 1x 6AV3688-3ED13-0AX0 5x mounting clips VP Ljdpjwa Eqnsfx Am Njaa 1x Profibus connector 3x plug connectors for 6AV3688-3ED13-0AX0 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany