Used Noris Plastic Gmbh Gravimetric Dosing And Mixing System for sale (94,340)

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Gjdpfx Afezw Ukcjujkc Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Gkedjx Rvc Aspfx Afujc

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Gksdpfsz Azz Eox Afusc Output capacity 750kg p/h

Condition: good (used), Year of construction: 2009, Equipped with an underneath conveyor beltWidth conveyor 79 cmLength conveyor 350 cmHopper 200 cm widePassage height: 8 cmBelt scraper Drum motorFixed speed380 Volt Gkedpfsz Rf Nzjx Afuoc More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained cooling system from IKS Industrielle Kühlsysteme GmbH, year of manufacture 2016. The system operated without any issues until it was decommissioned in 05_2025 and received regular maintenance. If you have any questions or require further information, please send us a message or give us a call. Gsdpfx Aoyx Hb Ejfuekc Due to the size and complexity of the system, it is only offered for sale after a prior inspection.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV Gkedpfx Ajng Ax Ssfusc - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. Gkedpfondk N Ajx Afuec With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Gsdpfx Afozc Npljuokc Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Gsdpfxjzza Dio Afuekc Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop Godpfxong Amko Afujkc OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm Gkedpfxonh R Eke Afuoc - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Gkjdpfx Afezilz Nsuec Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: good (used), Year of construction: 2009, Equipped with an underneath conveyor beltWidth 77 cmLength 475 cmHopper opening 300 cm x 200 cmPassage height: 8 cmBelt scraper with counterweight. Drum motorFixed speed380 Volt Gkjdoz Rfl Aspfx Afuec More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2009, Equipped with an underneath conveyor beltWidth 77 cmLength 490 cmHopper opening 300 cm x 200 cmPassage height: 8 cmBelt scraper with counterweight. Drum motorFixed speed380 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Gksdpfxjz Rfl Nj Afusc The specialist in used agriculture and horticulture machinery

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) Gkodpfx Asxm Uf Sefujc • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Year of construction: 2009, condition: ready for operation (used), Capacity: 800l, power: 110kW, mixing chamber material: stainless steel, speed: 475rpm, dimensions X/Y/Z: 2800mm/1800mm/2500mm, weight: approx. 3600kg. Godpfx Ajtqnuqsfuokc

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: Gkedpfeyi Ezkjx Afuec - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Gedpfx Ajh Akm Tefuekc

Condition: used, This listing is for the Pall Allegro 50L Single Use Mixing System. The unit is in full working condition and ready for immediate use This premium single-use mixer features a magnetically driven impeller designed for scalable, low-shear mixing from 2 L to 50 L. It offers an optimized compact footprint perfect for cleanrooms, excellent powder-to-liquid homogenization, and straightforward integration into modern bioprocessing lines. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Gsdpfjzc Hw Hox Afuekc

Year of construction: 2017, condition: ready for operation (used), First vessel chamber pressure min./max.: -0.1MPa/0MPa, max. second vessel chamber pressure: 0.4MPa, min. process temperature: 0°C, max. vessel chamber process temperature 1/2: 100°C/152°C, vessel chamber volume 1/2: 241l/27l, vessel chamber test pressure 1/2: 0MPa/0.77MPa. Documentation available. An on-site inspection is possible. Gsdpoy Aad Ujfx Afuekc

Condition: used, Year of construction: 1991, Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system. Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce Gkjdpfx Aszgcuzjfujc Volume: 33000 l per tank Max. pressure: 2 bar Pump capacity: 28 m³/h Operating temperature: 40 °C Length: 2600 mm Width: 2600 mm Height: 8500 mm Weight: 3900 kg Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool Material: stainless steel 1.4301 Position: free standing Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps Features: 2 zone frame cooling, insulation with stainless steel sheet panelling, agitator in the base, manhole at the side, tank fittings; 2 pumps; pipe fence; panel with CO2 fumigation; measurement and control technology; control cabinet with control panel; Other: Pipe fencing, pipe panels, measurement and control technology. Pumps, CO₂ injection unit

Year of construction: 2013, condition: ready for operation (used), A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible. Gjdpfxeywlplj Afujkc

Year of construction: 1962, condition: ready for operation (used), A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available June 2026. Godpfx Afjyxrameuokc

Year of construction: 1992, condition: ready for operation (used), A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Gkjdpfjxqgxxjx Afusc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Gkedpfsxy Rddox Afujc Available immediately