Used Ocmac Edgebander Machine Ocmac Shf 800 for sale (68,139)

Condition: used, Year of construction: 2007, Folding machine MBO Navigator T 800/442 Year: 2007 Description: - 16 page folder Feeder - Round pile feeder - Dualfeed - Pump Buckle folding unit: 1 Isdexd Dmyopfx Anwoic MBO T800.1-1-78/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 78 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 2 MBO T800.1-2-68/4 - Second buckle folding section with 4 buckle plates - Maximum infeed width: 68 cm - Perforating shaft - Anti noise hood(s) Buckle folding unit: 3 MBO T800.1-3-56/2 - Third buckle folding section with 2 buckle plates - Maximum infeed width: 52 cm - Noise hoods for upper folding buckles Delivery MBO SBAP-46-ME - Horizontal stack delivery with pressing and marking device

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz Iijdpfx Asxymfwonwoc - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Iijdpfx Anox A Hfijwsc Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: ready for operation (used), Year of construction: 2009, Board thickness 60 mm Edge thickness 3 mm Feed advance 25 m/min Sound-proof cabin Yes Glue tank Yes ----- Weight 3300 kg Hours worked Hours under power State good At local norms ----- Status in production Description We are putting our IDM edgebander up for sale as a replacement following the expansion of our production workshops. Here are the technical specifications: Model P-RT4 (productivity) Machine dimensions: 8656 x 900mm 1600mm wide roller table Crawler feed speed: 12-25 m/min Minimum panel size (length x width): 220 x 60mm Panel thickness: 10 to 60 mm Edge thickness from 0.3 to 3 mm Top, bottom, front, rear shape copying, end trimming on independent motors Profiled and flat scraping unit Integrated router shaft for optional panel grooving Edge and panel cleaning system with brushes Safety devices on all covers + environment (machine complies with standards) Iiedpsuftubefx Anwjc Electronic and mechanical adjustment of all aggregates Automatic part detection and aggregate positioning Granular gluing system with glue tray Integrated edge-roller tray Panel and edge preheating lamps Electronic positioning of pressure rollers Weight: 3300 kg

Condition: used, machine/vehicle number: 007809, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Max feed speed: 40 m/min Operating Units Right Side: 8 nr Iiodpeyhbn Dsfx Anwsc Operating Units Left Side: 8 nr

Condition: used, machine/vehicle number: 008121, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Corner Rounding Unit: yes Max Panel Width: 3000 mm Ijdpfxew Idhto Anwsic Max feed speed: 32 m/min Operating Units Right Side: 10 nr Operating Units Left Side: 10 nr

Condition: new, machine/vehicle number: 190028001, Voran brushing machine 12 brushes / 800 mm This machine has been designed to remove adhering impurities such as soil or sand from fruit and vegetables. The rotating movement of the brushes removes the dirt. The forward movement is achieved by the mat on top in combination with the rotating movement of the brushes. Structure of the appliance: The 12 rotating plastic brushes are enclosed in a stainless steel housing, which is mounted on a height-adjustable frame with wheels. Iiodpfx Anetvfcujwsc The brushes can be loaded manually or via the VORAN roller sorting table Standard equipment: - Adjustable speed - Height and angle adjustable - mobile Technical data: Processing capacity up to 3 000 kg/h Discharge width 500 mm Discharge height ~700 mm Electrical connection 230V 50Hz (1-phase) Electrical power 0.55 kW Plug type F (=SCHUKO) Dimensions: Length 1 980 mm Width 980 mm Height 820 mm Weight 170 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Ijdpfx Asxcwrmjnwoic Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: Ijdpfxewyu E Ue Anweic • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm Iiedpfx Ajwyu Rwsnwjc - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Year of construction: 2019, operating hours: 78,560 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 3385, Equipment: CE marking, compressed air system, Zeer mooie wasmachine, als nieuw, met vele opties, zoals extra spoelstap met demiwater indien nodig, extra verwarming en zwaardere ventilatie voor sneller en beter drogen. Iedpfx Anezfi Dyswoic

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Iisdpfozdar Hox Anwoc Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: new, Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Ijdpfx Aod Av Dusnwsic Tilting table 0°- 45° Dust port diameter 2 x 100mm

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD - Main transformer 380-200V/50Hz - 11/15 kW spindle motor - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 Iedsy Ayk Uspfx Anweic - 32-position tool magazine - Pneumatic chip cleaning system - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Iedpfx Anehu Ab Dsweic Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Year of construction: 2026, condition: new, It is a first processing step during which machine transfers fruit, vegetable or berries to the next stages of processing: washing, sorting or crushing. Bin tipper lifts the box and pours out the products into sorting conveyor, AQUA or MAXIMILL. Bin tipper is entirely made of stainless steel. Iisdpfx Aneichbbewjc Machine has a hydraulic drive. Controls of the machine are very simple: just put the box in and move the control handle to lift it up. Suitable for boxes with different dimensions. Max size: 120x120x85. Loading power – 800 kg.

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Iedpezbb Tmsfx Anweic Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Funk F800 flake ice machine, manufactured in 2021, for an ice output of approx. 700 to 800 kg in 24 hours, was only used for approx. 3 years, protective film still on the device. The wafer-thin flake ice is scraped off by an evaporator roller cooled from the inside. It can be easily incorporated into the dough, does not tend to clump together and has a very good cooling effect. The machine includes patented "Funk EasyClean" easy cleaning principle to meet high international HACCP standards. The stainless steel cover of the device can be easily removed, revealing all components of the flake ice maker that need to be cleaned. The device is DVGW-compliant. Very simple (manual) operation without electronics, computers, etc., with manual rinsing function. The device is fully functional, perfect for regulating dough temperatures in the warm season by adding flake ice. The flake ice does not cause any (mechanical) problems in the dough kneader. The device is ready to connect (= plug & play) and mobile on castors. Refrigerant: R 449 A, 2.3 kW electrical connection value Dimensions: approx. 100 x 80 x 100 cm (W x D x H), approx. 220 kg weight Iedpfxjy T Eg No Anwoic

Condition: used, Year of construction: 2018, total height: 4,000 mm, total length: 5,100 mm, total width: 3,800 mm, overall weight: 20,000 kg, POS POSmill H 800 U – 5-axis machining centerThe machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer.A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry.Operating data:Control ON: approx. 25,280 hMachine ON: approx. 24,730 hProgram run: approx. 9,150 hSpindle hours: approx. 8,555 h Spindle speed: 18000 - rpm Travel Y-axis: 820 - mm Dimensions (LxWxH) approx.: 5100 x 3800 x 4000 mm Weight approx.: 20,000 kg Control: Heidenhain ITNC 530 Travel Z-axis: 600 - mm Travel X-axis: 670 - mm 5-axis machining: Yes Year of construction: 2,018 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes Iedpjy An A Eefx Anwsic

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor Iiedpofbt Huofx Anwoc - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: good (used), Year of construction: 2017, Manufacturer: MIBA Type: NC-Milling Machine Control: Siemens TOUCH Year of manufacture: 2017 Z Axis 1100 mm X Axis 1310 mm C Axis Endless Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11,500 mm Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length Iiedpfx Aswq Hwdsnwec 14400 mm Width 12000 mm Height 6000 mm Weight 24000 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Iiodpfx Ajxta E Rsnwsc Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Iiedpfsxm Sudsx Anwsc Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Iijdpfxowq Hp To Anwoc Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Iisdpforx Rxtsx Anwec Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg