Used Omes Omes Punching Machine for sale (66,177)

Condition: good (used), functionality: fully functional, Boschert EL 300 Guedsznu H Sepfx Abfef The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Gsdpoww U T Hofx Abfsuf

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Guodpfxezmwnpo Abfsf Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Condition: used, Year of construction: 2001, operating hours: 291,559 h, functionality: fully functional, machine/vehicle number: 1, punching force: 20 t, total height: 2,350 mm, total width: 3,000 mm, total length: 5,350 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 10 mm, type of input current: three-phase, punching diameter: 26 mm, workpiece weight (max.): 90 kg, overall weight: 17,000 kg, table width: 1,250 mm, table length: 3,000 mm, input frequency: 50 Hz, feed length X-axis: 1,250 mm, feed length Y-axis: 3,000 mm, input voltage: 400 V, Equipment: safety light barrier, We offer this used LVD DELTA 1250 punching and cutting machine, manufactured in 2001 – it is fully functional and comes with 100 various punching tools. The working surface is 1250x3000 mm, and it can be further repositioned, allowing you to punch longer sheets. We also include a tool grinder with the punching machine. Manufacturer: LVD Model: DELTA 1250 Year of manufacture: 2001 Gujdpfx Abozp Eb Nofsf If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Geka punching machine model Puma 150/ ,punching power 150tm,hole capacity diameter 40 x28,neckline 750mm, in good condition. Godpfx Abjrt Rrzefouf

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Gedpovdkprofx Abfouf

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Gedotvfcmspfx Abfjuf

Condition: used, functionality: fully functional, Year of construction: 2012, Standard equipment: Machine - Work area 2500 x 1250 mm - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool stations and 3 clamping claws - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping device - Foot pedal for clamping claw closure - Ball tables - Two good part containers - Scrap container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control TASC - Enclosed beam guidance - Beam tube ventilation with compressed air Cutting head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable clamping device with manually adjustable clamping force - Stroke counter punch - Spray lubrication punch - Punch slug extraction - Deformation detection - Flap for punching parts 500 x 500 mm incl. sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control system - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard disk with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Godjzmgm Iopfx Abfouf Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Dual light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown - Protection against stray radiation - Compact dust extraction system Extended equipment - Brush tables - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication die - 3 clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Air blow-out device for small parts - Follow-up cylinder Automation: - Toolmaster

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Gusdpjzmgi Nefx Abfef Multitool Thread forming

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Gusdpfx Abowzyg Hsfsf

Condition: excellent (used), Year of construction: 2018, SBL 1060 SE Year: 2018 Sheet size (max.): 1060 x 760 mm Sheet size (min.): 350 x 400 mm Stamping size (max.): 1045 x 745 mm Gripper margin: 11 mm Platen pressure (max.): 300 tons Production speed: 8,000 sheets/hour Total power consumption: 20 kVA Elevated machine: 400 mm Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 x 350 mm to 1060 x 760 mm Max. cutting format: 1050 x 740 mm Min. sheet size: 470 x 350 mm Gujdpfx Aeznlbaobfsf Max. sheet size: 1060 x 760 mm Max. cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max. 4 mm) Min. gripper margin: 9.5 mm Max. inside chase size: 1155 x 852 mm Cutting plate size: 1076 x 756 mm Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L x W x H): 5,900 x 5,700 x 2,615 mm Max. pile height – feeder (with pallet): 1,750 mm Max. pile height – delivery (with pallet): 1,450 mm - Vacuum belt on feeder - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - Quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline system - Micrometric system - Stripping - Quick lock for upper and central stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) - Delivery Section - High-pile automatic non-stop delivery with conveyor - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder with decoiler Tooling is not included Guodpfxsywty Eo Abfjf If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Gusdpoyyk Urefx Abfsf Machine weight: 15,100 kg

Condition: used, Engine and gearbox from an Allgaier, part of a Bihler GRM 80, model year 1984. ATTENTION!! This offer includes only the engine and gearbox as shown in the images. According to the previous owner, the gearbox was overhauled and has not been used since the overhaul. Godpfxozl Ez Ie Abfsuf

Condition: good (used), Year of construction: 2006, functionality: fully functional, For sale is a TRUMPF TruMatic 1000 Rotation, a compact and economical CNC punching machine for the precise processing of sheet metal. Thanks to the proven TRUMPF rotation technology, all rotating tools can be positioned continuously. This allows for the efficient and highly precise production of complex contours, elongated holes, cutouts, and forming operations. The machine is ideally suited for use in metal construction, switchgear and control cabinet construction, ventilation technology, general mechanical engineering, and contract manufacturing companies. Technical data: Manufacturer: TRUMPF Model: TruMatic 1000 Rotation Control: TRUMPF CNC control Working area: up to 2,500 × 1,250 mm Gedszl Adgjpfx Abfsuf Maximum sheet metal thickness: up to 6.4 mm (material-dependent) Maximum punching force: 165 kN (16.5 t) Tool rotation: 360° CNC-controlled High positioning accuracy Automatic tool changer Programmable tool rotation Power connection: 400 V / 50 Hz The TruMatic 1000 is characterized by its compact design, high process reliability, and versatile tool technology. In addition to punching, threading, beading, embossing, forming, and cutouts can be performed, depending on the tool configuration. Equipment: CNC-controlled tool rotation Automatic tool changer TRUMPF tool system High repeatability Programmable tool holder Brush table Hydraulic punching drive Control panel with TRUMPF control Documentation (if available) Condition: Used Technically functional Inspection under power is possible by appointment. Sale due to plant restructuring or inventory change. Scope of delivery: TRUMPF TruMatic 1000 Rotation Existing tools (upon agreement) Documentation and accessories as per inspection Application areas: Metal construction Sheet metal processing Switchgear and control cabinet construction Ventilation and air conditioning technology Mechanical engineering Contract manufacturing Series and small series production Location: Riesa - Germany Inspection / Loading: An inspection of the machine under power is possible at any time by appointment and is expressly desired. If desired, we can assist with: Disassembly Loading Transport organization within Germany and Europe. Errors, changes, and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Gujdpfx Abszlivijfef Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Guodpfxemig D Ds Abfef

Condition: used, Manufacturer: TRUMPF Type: CS20a EXCELLENT CONDITION Gedpo Dv I Tofx Abfouf

Condition: used, Year of construction: 2007, Control system, manufacturer: Boschert; quick-change tool system, manufacturer: Trumpf; punching force: 3 x 280 kN; Station 1: Trumpf system tool, size 3 (105 mm) with spray device; Station 2: Trumpf system tool, size 3 (105 mm), free-rotating and indexable; Station 3: Trumpf system tool/Boschert Revotool, size 3 (105 mm), including Revotool 8-position tool holder; travel distances: X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm; punching arm overhang: 1,730 mm; sheet metal thickness max.: 6 mm (clamp opening); stroke height max.: 90 mm, programmable in infinitely variable steps upwards and downwards; punching slug extraction; ball bearings in the machine table; table width left + right: 3,200 mm each; table depth: 2,810 mm; table height: 900 mm; overall width: 6,482 mm; overall depth: 4,600 mm; overall height: 2,110 mm; with workshop trolley, manufacturer: KS Tools, 7 drawers, contents: various hand tools. Guedpfx Aszkah Tsbfjf +++ ATTENTION: This machine is part of an online auction! +++

Condition: used, machine/vehicle number: 1903, Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903Serial-No. 1903 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Godpfxjh Axmfj Abfjuf Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gsdpfx Abei Dx Nnsfjuf Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1967, machine/vehicle number: 3659, Kalenderstanze - Calender Punch Machine Renz Super 520Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video Gedpfjh Axcyjx Abfjuf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 10097, Universelle Stanzmaschine - Punching machine PRINTEX 10097Serial-No. 10097- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gjdpfx Aeh Axl Nsbfeuf

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video Gedpfx Aeiiduaebfeuf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 22027, Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punchAuslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gjdsh Uk Haspfx Abfsuf