Used Omg Epm/70 2-Sided Oscillating Drill for sale (91,053)

Condition: new, Two-stage side channel compressor The VASF 2.50/2-0.AC230 is a flow machine with a VARIAIR frequency inverter, offering high performance with 100% oil-free and contact-free operation. These side channel blowers are low-maintenance, highly efficient, and require minimal servicing. Features VARIAIR frequency inverter Contact-free compression Compact design Inlet and outlet silencers Fpsdpfoyk Dkmex Afuon Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Advantages Precise volume flow through speed control Low operating and exhaust temperatures Low-noise operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Relative pressure: +560 mbar Inverter power: 0.65 kW Hz: 50…300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, table dimensions 450x300mm working height regulation iron cast body Fpedpfxozz N Spj Afusn

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30S00738, Year of construction: 2013, operating hours: 8,506 h, load capacity: 7,000 kg, lifting height: 4,450 mm, construction height: 3,300 mm, fork length: 1,200 mm, empty load weight: 10,410 kg, TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,450 mm Overall height: 3,300 mm Fork length: 1,200 mm Fedpfszmwmlex Afuopn MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W x H): 3,550 x 1,980 x 3,300 mm Dead weight: 10,410 kg Transmission: Automatic Front tires: Superelastic Rear tires: Superelastic Operating hours: 8,506 h EQUIPMENT 3rd valve 4th valve Full cabin Cabin heater Hydraulic line preparation

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Fodpfx Afjdktnksujpn

Condition: excellent (used), Kuka Robot KR 70 R2100 SEL Industrial robot KCP 4 KRC 4 Fpjdpfx Ajznkfwefuen Complete Robot control cabinet, cable, panel 2 units in stock

Condition: used, 2-spindle vertical drilling machine Fedpfx Afsyg Ix Tjuopn

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 7,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Triplex Fedpeu Ac E Tsfx Afuopn Technical condition: good Fork positioner,

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm Fedpfx Afeiqhh Sjujpn -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. The fewer limitations, the greater the progress! With our machine, we do not impose any limits on workpiece length. Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Fpedpfxezutqij Afusn Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Fjdpfx Afsz Nxwceuopn Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: excellent (used), HOLYTEK YOM-110 oscillating drilling machine Oscillation width max 110mm Maximum depth of hole 50mm Spindles rotation speed 9500r.p.m Table tiltable up to 20° Fedeu Efhcepfx Afujpn Tools mounted with clamping cage CE certificate

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek Fpjdpfxjzy Nxte Afujn High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 214 KW

Condition: new, functionality: fully functional, Year of construction: 2026, fuel type: electric, front tire type: cushion tires (non-marking), rear tire type: cushion tires (non-marking), total width: 2,150 mm, Equipment: CE marking, New electric forklift Voltforce 2 ton | 4.5 meters | Side shift + fork positioner New electric forklift from Voltforce, available for immediate delivery from stock. A very complete and powerful machine with maintenance-free batteries, side shift, and fork positioner. Ideal for warehouses, workshops, logistics, and daily professional use. Specifications • Lifting capacity: 2000 kg • Lifting height: 4.5 meters • Brand: Volt Force • Type: CPD-20 • Electric • 60 Volt system • Maintenance-free battery • Including battery charger • Charging via 230 Volts • Intermittent charging possible • Operating time approximately 5–6 hours • Side shift • Fork positioner • Solid rubber tires • Compact model – only 1.20 m wide Fodpfx Aoztpwijfuopn • Mast height 2.15 m • Travel speed 14 km/h • Very maneuverable and smooth driving performance • Good lighting + work lights • Reverse alarm + blue light • Turn signals and brake lights • CE certified • Available in other colors and weight classes upon request • 2-year manufacturer's warranty Why choose this Voltforce? - Maintenance-free technology - Low operating costs - Suitable for indoor and outdoor use - Easy charging via a standard power outlet - Excellent price-quality ratio - Good service - Immediately ready for use Price 2 Ton electric forklift € 9,500 excl. VAT Price 2.5 Ton electric forklift € 9,750 excl. VAT Fast delivery Transportation is possible upon request. For more information or to arrange a viewing, please send an email or contact us.

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Minimum drilling width 250 mm Maximum depth 250 mm Fjdpfxozxg Dwe Afujpn Engine power hp. 2

Condition: good (used), functionality: fully functional, mileage: 1,460,000 km, first registration: 03/2005, fuel type: diesel, maximum load weight: 13,300 kg, overall weight: 18,000 kg, tire condition: 95 %, axle configuration: 2 axles, next inspection (TÜV): 05/2027, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro3, number of seats: 2, loading space length: 8,000 mm, Year of construction: 2005, Equipment: ABS, air conditioning, airbag, full service history, spoiler, RENAULT PREMIUM 320.18 WITH CURTAIN-SIDED TRAILER Renault Premium 320.18, a 2-axle tractor unit with a fixed body and curtain-sided trailer, 320 hp, 6-cylinder engine, 11,000 cc, EURO 3, GVWR 18,000 kg, payload 13,300 kg, semi-automatic transmission (without clutch pedal), registered 03/2005, 1,460,000 km, full air suspension, new tires, fixed body suitable for carrying 19 EPAL pallets, internal usable body length 8 meters with curtain-sided trailer and adjustable height, sliding roof, rear aluminum doors, sleeper cab (1), next annual inspection due 05/2027, in very good condition. TYPE TRACTOR UNIT EURO STANDARD EURO 3 GROSS VEHICLE WEIGHT 18,000 KG ENGINE 11,000 CC Brand Renault Trucks PAYLOAD 13,300 KG POWER Fpsdpfx Ajzwdwfsfuon 320 HP SERIES Premium KM 1,460,000 KM TRANSMISSION SEMI-AUTOMATIC (WITHOUT CLUTCH) EQUIPMENT CURTAIN-SIDED TRAILER FUEL DIESEL YEAR 2005

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. Fjdpfx Afoz Hxp Ssuepn • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 230 cm³, injection pressure: 2,500 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Fpjdjynbcnspfx Afujn

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic Fpsdpozrpr Dsfx Afuon cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 2024, operating hours: 766 h, clamping force: 400 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2738 bar- Max. Swept Volume: 28 cm³- Mould Height: 160 - 475 mm- Distance Between Tie Bars: 280 x 280 mm- Centering Diameter (Ejector/Nozzle): 110 mm / 125 mm- Operating Hours (Pump): 766 hrs- Core Pull: 1- Heating Control Circuits: 3 electrical heating control circuits for mould heating, max. 2 kW/230 V- Cooling Circuits: Programmable machine-related cooling circuits, cooling water distribution with 3 free circuits (DN 13)- Nozzle Specifications: Open nozzle 18 mm with M 24x1.5 internal thread, flat nozzle tip, nozzle heating band- Control System: SELOGICA direct control with 15-inch (38.1 cm) touchscreen user interface- Connectivity & Interfaces: Basic Connectivity (CPU Ethernet port, IIoT Gateway), EUROMAP 67 robot interface (50-pin), EUROMAP 65 chip card operating authorization, CompactFlash & USB interface, Printer interface (serial USB), Interface for colouring/dosing unit Fpodpfx Afez Eq S Neuon

Condition: used, Technical specifications: Max. planing width: 120 mm Fedszgurxopfx Afuspn Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Spindle arrangement: bottom, right, left, top, bottom, top, left, diagonal Dust extraction port diameter: 7x120 mm Continuous feed rate adjustment: 4-24 m/min Feed system: via cardan shafts Power supply: 400 V Total power: 19 kW Overall dimensions: Length: 3640 mm Width: 1050 mm Height: 1200 mm

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 1,126 kg, load capacity: 210 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA smartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 210 R2700-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 210 R2700-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2021 with 0 operating hours. Robot specifications Model: KUKA KR 210 R2700-2 Payload: 210 kg Reach: 2701 mm Year of manufacture: 10/2021 Operating hours: 0 h / NEW Weight: 1126 kg Colour: RAL 7016 Cable set: INT 084ST2700 Controller KUKA KR C4 EU KSS 8.6 Servo configuration SC4 400 V transformerless power supply Siemens SCALANCE X208 Interface X42 Ethernet interfaces X67.1–X67.3 24 V power interface X55 27 V power / USB interfaces X51 / X56 CSP 2x USB 3.0 Cabinet base with spacer Set of 75 mm rollers Fpsdpozyambofx Afuon Installed KUKA software & technology packages KUKA.SafeOperation 3.5 KUKA.UserTech 4.0 KUKA.LoadDataDetermination 7.1 KUKA.GripperSpotTech 5.0 KUKA.RobotSensorInterface 4.1 KUKA.DeviceConnector KUKA.WorkVisual 6.0 KUKA.ActivationManagementTool The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Fpodpjvl Skasfx Afuon Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm Fpedpfx Afex E U S Ejusn

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: bottom, right, left, top, universal Number of upper steel feed rollers: 4 Number of upper rubber feed rollers: 3 Diameter of the dust extraction port: 5x120 mm Feed adjustment: Feed via universal joints Table lubrication pump Power supply: 400 V Fjdpfx Ajzd Elwefuepn Total power: 24 kW Overall dimensions: Length: 3800 mm Width: 1600 mm Height: 1600 mm

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Fpjdpfxjzp R I Ij Afuon terms of payment: 100% prior to delivery