Used Pasteurizer Pa500 Rwt Gas for sale (2,854)

Condition: used, Year of construction: 2000, machine/vehicle number: M000000Y5670, functionality: unexamined, Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Iaedpfx Ajygvzvsb Not Model: Alpha-8SE-E Manufactured: 11.2000 Serial No.: M00000Y5670 No books or documentation included. Pumps/Motor: 2 x Toshiba 3-phase induction motor, 480 Volt, 60 Hz.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in Iajdpfxsy Sf Aze Ab Not • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: G21SJ24073154650, The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombiPro 20-1/1 Gas model with 20 GN 1/1 trays is easy to operate even for untrained staff, as it delivers outstanding food quality without the need for constant supervision. The ultra-fast intermediate and self-cleaning functions keep your device sparkling clean. The unit has undergone inspection in our in-house workshop and is fully operational. The combi-steamer has only 648 operating hours. You will receive an invoice with VAT shown separately. Service: We are happy to put you in contact with a certified Rational customer service provider anywhere in Germany. Iasdpfx Abox Dtkzo Net Looking for a specific Rational appliance model? Contact us – we have access to an extensive range of new and used equipment. Our appliance service for you: • 6-month warranty on all electrical parts, limited to replacement of defective parts, not including labor for removal and installation • High-quality branded equipment at fair prices • Professional and competent advice – before and after purchase • Flexible options for shipping or self-collection • Provision of operation manuals, wiring diagrams, and spare parts • Complete range of accessories at attractive prices Condition: Used, inspected and fully functional Technical Data: • W x D x H: 877 x 913 x 1872 mm • Minimum door opening for transport W x H: 900 x 1900 mm • Serial no.: G21SJ24073154650 • Year of manufacture: 2024 • Max. load per tray: 5 kg • Max. total load: 100 kg • Gas device weight: 273 kg • Electrical connection: • Voltage 1 NAC 230 V • Gas connection power: 42 kW • Fuse: 63 A • Water connection: • Water supply (pressure hose): 3/4 inch • Water drain: DN 50 Further Information: • Temperature range: 30°C to 300°C • Detects current cooking chamber conditions • Recognizes tray size, load quantity, and product condition for precise browning • Learns frequently used cooking habits and applies them • Determines the ideal cooking path to achieve the desired result • MyDisplay – customizable, user-specific control panel • TFT color display and touchscreen • Application and operating manual accessible on the device display • Core temperature probe with automatic error correction and positioning aid • Glazed door chamber, energy-saving • LED interior lighting • Includes energy consumption display • Humidity regulation: accurate percentage-based measurement and setting • Custom programming for at least 350 cooking programs, each with up to 12 steps • Three-stage adjustable steaming • USB interface • High-performance fresh steam generator with automatic descaling • Five programmable air speeds Shipping: • Delivery or self-collection by arrangement • Worldwide shipping available on request • Shipping to islands or mountain stations by prior arrangement only Subject to changes and errors.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: Iodpfx Aboy Sv Smo Njat RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of May 2026.

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, empty load weight: 3,740 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL OPERATORS. Our forklifts are expertly refurbished to FEM-4.004 guidelines and current safety standards – delivering maximum quality and safety. From chassis to battery, including drive system, brakes, steering, and electrics – each vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ machines available Iasdpfx Abjy Rqpks Net ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPYD25-G3-KU Drive type: LPG Load capacity: 2,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,700 mm Mast type: Triplex Full free lift: Yes Overall height: 2,160 mm Fork length: 1,200 mm Unladen weight: 3,740 kg Tyres: Solid rubber Model variant: CPYD25-G3-KU Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road package – equipped for potential use on public (restricted) roads: indicator, rear light, reversing light, reflector, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit (routed to carriage)

Condition: new, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,180 mm, fork length: 1,200 mm, empty load weight: 4,700 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards—to ensure maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics—each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and receive professional consultation—let us find the perfect solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPYD35-G3-KU Drive type: LPG Load capacity: 3,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 3,300 mm Mast type: Duplex Free lift: No Overall height: 2,180 mm Fork length: 1,200 mm Unladen weight: 4,700 kg Tyres: Solid rubber Iaedpsy Rqn Tsfx Ab Not Model type: CPYD35-G3-KU Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic set-up for potential (limited) on-road use: indicator lights, tail light, reversing light, reflector, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit fitted up to the fork carriage

Condition: new, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,180 mm, fork length: 1,200 mm, empty load weight: 4,700 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards—to ensure maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics—each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling Iajdpjy Rqpdjfx Ab Not ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test on site and receive professional consultation—let us find the perfect solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPYD35-G3-KU Drive type: LPG Load capacity: 3,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 3,300 mm Mast type: Duplex Free lift: No Overall height: 2,180 mm Fork length: 1,200 mm Unladen weight: 4,700 kg Tyres: Solid rubber Model type: CPYD35-G3-KU Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic set-up for potential (limited) on-road use: indicator lights, tail light, reversing light, reflector, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit fitted up to the fork carriage

Condition: new, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,230 mm, fork length: 1,200 mm, empty load weight: 4,700 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are reconditioned to FEM-4.004 standards and the latest safety regulations – ensuring maximum quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics – every vehicle undergoes thorough inspection and refurbishment. ✔ Made in Germany – with precision and responsibility ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test onsite and receive expert advice – we will find the right solution for you. Industrial truck specifications: • Manufacturer: Heli • Model: Counterbalance Forklift CPYD35-G3-KU • Drive type: LPG Iaedpfjy Rqn Hex Ab Nst • Load capacity: 3,500 kg • Year of manufacture: 2025 • Operating hours: 0 • Lift height: 4,700 mm • Mast type: Triplex • Full free lift: Yes • Overall height: 2,230 mm • Fork length: 1,200 mm • Unladen weight: 4,700 kg • Tyres: Solid rubber • Model type: CPYD35-G3-KU Lighting: - 2x front work lights - 1x rear work light - Rotating beacon - Street legal equipment for limited public road use: indicator, tail light, reverse light, reflector, etc. Attachments: - Sideshift - Additional hydraulic circuit – routed to fork carriage

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,330 mm, fork length: 1,200 mm, empty load weight: 3,740 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards—for maximum quality and your safety. From the chassis to the battery, through drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test and get advice on-site now—we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Type: Counterbalance Forklift CPYD25-G3-KU Drive type: LPG Iedpfx Asy Rqnmjb Neat Load capacity: 2,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 3,300 mm Mast type: Duplex Free lift: No Overall height: 2,330 mm Fork length: 1,200 mm Unladen weight: 3,740 kg Tyres: Solid rubber Model variant: CPYD25-G3-KU Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic equipment compliant for possible use on public (limited) roads: indicator light, tail light, reverse light, reflector, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to fork carriage

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,740 mm, fork length: 1,500 mm, empty load weight: 8,470 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. READY FOR PROFESSIONALS. Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive train, brakes, steering, and electrics – every machine is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after the sale Test onsite and get individual consultation – we will find the right solution for you. Industrial Truck Specifications: - Manufacturer: Heli - Model: Counterbalance Forklift CPYD50-G3-KU - Power source: LPG - Rated capacity: 5,000 kg - Year of manufacture: 2025 - Operating hours: 0 - Lift height: 4,700 mm - Mast type: Triplex - Full free lift: Yes - Overall height: 2,740 mm - Fork length: 1,500 mm - Unladen weight: 8,470 kg - Tyres: Solid rubber - Model type: CPYD50-G3-KU Cabin type: Full cab – front, roof & rear windscreen + sprung steel doors Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Iodpfey Rqnaex Ab Noat Lighting: Road traffic equipment (Germany) – suitable for limited on-road use: indicators, tail lights, reverse lights, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner Attachment: Additional hydraulic circuit pre-installed to fork carriage

Condition: good (used), NISSAN H01A15 LPG counterbalance forklift (4-wheel) Additional technical specifications: * Load capacity: approx. 1,400–1,500 kg * Drive: LPG / liquid propane gas Iasdpfey R Eb Ujx Ab Njt * Operating hours: approx. 10,100 h * Own weight: 2,685 kg

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm Iedpsx Nwinjfx Ab Njat - Cooling bridge after the oven - Infeed belt: 200 cm - Outfeed belt: 150 cm The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift - Power steering The machine is in perfect working order and ready for immediate use. Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Iedpoyi Eyajfx Ab Nsat Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Condition: used, mileage: 131,800 km, power: 115 kW (156.36 HP), first registration: 03/2014, fuel type: gas, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, parking heater, soot filter, Sprinter 316 NGT panel van L2H2 with workshop equipment Iaodpfey R Hxhsx Ab Njt Petrol + GAS 6-speed manual transmission, air conditioning, auxiliary heater, partition wall, tow bar 2,000 kg, front and rear parking sensors, crosswind assist, 3 seats, EURO 6, 2x electric windows, electric mirrors, ABS.

Condition: used, Year of construction: 2002, Chamber pasteurizer for pasteurizing bottled beverages. The machine can accommodate up to 9 pallets at a time. Pressing the start button causes the door to close automatically and the chamber pasteurizer to start the program previously set via the visualization system. Once the program has run its course, the door opens automatically. Manual operation with manual control of the actuators is also possible. Additional title: for simultaneous pasteurization of up to 9 pallets Max. load: 9 pallets Voltage: 380 V Frequency: 50 Hz Iaodpjy R Uwfjfx Ab Net Material: stainless steel housing Base construction: standing on feet Features: pasteurization chamber, pallet conveyor, blower, extraction system, control system, and visualization

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Serial number: L177B31996J Iaodpfx Asy Iv H Neb Net VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: used, functionality: fully functional, fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), Year of construction: 2000, operating hours: 2,156 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OK Matic + 4-cylinder VW gas engine + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Augers / blades Ijdpfxey Rqbgj Ab Neat + Year of manufacture: 2000 + 2,156 operating hours Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 7,072 h, load capacity: 4,000 kg, lifting height: 4,350 mm, free lift: 1,960 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 – 2000 | 7,072 HOURS | GAS | DUPLEX 4,350 mm | FREE LIFT 🚜 Ready for immediate operation – no investment, no risk 🔍 Why choose this forklift? Looking for a forklift that won’t disrupt your workflow? This COMBILIFT C4000 is a proven machine, fully serviced and ready for use – just get in and start working. No hidden costs. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 7,072 operating hours – genuinely low usage ✔ New tires – no additional investment necessary ⚙️ Key specifications: Load capacity: 4,000 kg Drive: Diesel (N.B.: initial says "gas", but spec field states "diesel", clarify on actual technology) Mast: Duplex – 4,350 mm lift height Fork positioner width: 1,360 mm Fork length: 1,200 mm Cabin: enclosed / heated 📋 Full technical specification General information: Year of manufacture: 2000 Operating hours: 7,072 Iajdpfxey Stgbo Ab Njt Load capacity: 4,000 kg Load center: 600 mm Machine weight: 5,800 kg Mast and lifting equipment: Mast type: Duplex Lifting height: 4,350 mm Forks and attachments: Wide fork positioner: 1,360 mm Fork length: 1,200 mm Dimensions: Height: 2,400 mm Length: 2,300 mm Width: 2,200 mm Overall height: 2,950 mm Chassis: Tyres: Superelastic (100%) – new Front: 200/50-10 Rear: 27x10-12 Equipment: Fully enclosed, heated cabin Fork positioner Free lift Condition: Technical: 5/5 – fully serviced Visual: refurbished, like new, no corrosion 🏭 Ideal applications: ✔ Narrow aisle warehouses ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor operations 💼 What you really get: You don’t just buy a 'used forklift.' You're investing in a fully prepared, work-ready machine: ✔ Every unit fully tested before delivery ✔ Ready for immediate use ✔ Live video demonstration available ✔ Direct delivery to your location 🚚 Delivery and support: European-wide transport Full logistics support Leasing / financing options available After-sales support ⭐ Why FT LOGISTICS? We deliver forklifts that work – not machines that sit idle in the workshop. ✔ Over 100 machines available ✔ In-house service and preparation ✔ Experience across Europe ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,650 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,800 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,050 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 12,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C5000L – 2018 – 3650 MTH – GAS – DUPLEX 4100 mm – FORK POSITIONER – OPTION WITH 4050 mm SPREADER BEAM – CONDITION 5/5 Used and new forklifts with a quality guarantee – FT LOGISTICS Ready for operation. No compromises. 💼 This COMBILIFT C5000L is more than just a machine—it is your assurance of smooth, reliable, and interruption-free logistical operations. Engineered for the most demanding work environments and fully serviced both technically and visually, this forklift presents as new and is ready for immediate deployment ✅. 🔧 Key Technical Specifications: 📅 Year of manufacture: 2018 ⏱ Operating hours: 3650 🔥 Engine type: GAS 🏋️ Lifting capacity: 5000 kg 🏗 Mast: Duplex – 4100 mm 🔄 Fork Positioner: 1320 mm | Forks: 1200 mm ➖ Spreader Beam: 4050 mm (option available) 🛞 Tyres: Superelastic (100%) 🛠 Technical condition: 5/5 – fully serviced, work-ready ✨ Visual condition: refurbished, corrosion-free, as new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 📏 Overall height: 2800 mm 🛞 Tyres: Superelastic – Front 200/50-10 | Rear 27x10-12 Isdpfx Abey Stfqo Noat 🚪 Fully enclosed, heated cabin ⚖️ Truck weight: 6700 kg ⬆️ Free lift: 1900 mm 🎯 Load centre: 600 mm 🏭 Perfect for: Warehouses with narrow aisles Timber, steel, and pipe industries Handling of long loads Indoor and outdoor use FT LOGISTICS – Quality you can count on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,942 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🇬🇧 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4000 – DUPLEX 4600mm – Year 2019 – 3942 h – LPG / GAS – SIDE SHIFT – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Professional consulting | Own transport | After-sales support 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. From small companies to major industrial plants – our forklifts mean reliability, safety, and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection – service, testing, oil & filter replacement, component regeneration 🧾 Full UDT inspection available 🎨 Own paint & service workshop – refined look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 👀 Machine viewing & testing available 🤝 Financing with leading leasing companies 💶 Invoice in EUR or PLN Iasdoy Std Topfx Ab Not 🏷️ IN OFFER COMBILIFT C4000 – Four-way / Multi-directional forklift 📆 Year: 2019 | ⏱️ Hours: 3942 | ⚙️ Drive: LPG / Gas | 💪 Capacity: 4000 kg 🎯 Mast: Duplex 4600 mm | 🔧 Forks: 1200 mm | Positioner: 1150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 2250 mm Dimensions: Height 2400 mm | Length 2400 mm | Width 2250 mm | Positioner width 1150 mm | Structural height 3000 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel & pipe industry | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? Ijdpfx Aey Stc Aob Njat ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,618 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2018 | GAS | Duplex 4600 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. The COMBILIFT C4000 is a robust multi-directional forklift designed for handling long and heavy loads in demanding industrial environments 🏭. After a complete technical and visual overhaul, and fitted with brand new superelastic tyres, the machine is in premium condition and available for immediate use 🚀. 🔍 Key Specifications: Year: 2018 | Operating hours: 5,618 hrs Drive: GAS (LPG) Load capacity: 4,000 kg | Load centre: 600 mm Iodpey Stciefx Ab Njat Mast: Duplex with free lift Lifting height: 4,600 mm | Free lift: 2,250 mm Fork positioner: 1,360 mm | Forks: 1,200 mm Optional spreader beam: 4,050 mm 🔩 Weight: 6,100 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,400 mm Overall height: 3,000 mm 🛞 Tyres (NEW – 100%): Superelastic Front: 200/50-10 | Rear: 27x10-12 ⚙️ Equipment & Condition: Fully enclosed heated cabin ❄️🔥 Duplex mast with free lift – ideal for low-clearance warehouses Refurbished, rust-free ✨ Technical condition: 5/5 🔧 🏭 Suitable for: Narrow aisle warehouses Timber, steel, and pipe industries Indoor and outdoor operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 Iajdpfx Asy Stb Ssb Njt • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,873 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,400 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2011 – 7873 HOURS – LPG – DUPLEX 4100 mm – WIDE FORK POSITIONER – CONDITION 5/5 🔧🚀 Used and new forklifts with guaranteed quality – FT LOGISTICS 🏆 Ready for operation. No compromises. This COMBILIFT C3000 is more than just a machine — it is your assurance of smooth, reliable warehouse operations with zero downtime. Built for the toughest operating conditions, fully serviced both technically and visually, this unit is in near-new condition and ready for immediate deployment. 💼✨ Key Technical Specifications 📊 Year of manufacture: 2011 Operating hours: 7873 Drive: LPG (gas) Load capacity: 3000 kg Mast: Duplex – 4100 mm Fork positioner: 2700 mm | Forks: 1200 mm Tyres: Superelastic (100%) Technical condition: 5/5 – fully serviced, ready to work Visual condition: refurbished, no corrosion, like new Height: 2350 mm | Length: 2400 mm | Width: 1950 mm Iodpjy Stbxefx Ab Noat Overall height: 2600 mm Tyres: Superelastic – Front 200/50-10 | Rear 23x10-12 Ideal for 📦🏗️ Warehouses with narrow aisles Timber, steel, and tube industries Handling long loads Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,697 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,400 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 26, overall weight: 6,500 kg, empty load weight: 9,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000CB – 2012 – 8,697 hours – LPG / GAS – TRIPLEX 4,900 mm – SIDESHIFT – FORK POSITIONER – CONDITION 5/5 Used & New Forklifts with Quality Guarantee – FT LOGISTICS Ready for operation. No compromises. This COMBILIFT C3000CB is more than just a forklift – it stands for reliability you can trust. Fully serviced, visually refurbished, and tested – looks like new, immediately ready for use 💪 Technical specifications: • Year: 2012 | Hours: 8,697 | Drive: LPG / GAS | Capacity: 3,000 kg • Mast: Triplex 4,900 mm | Free lift: 1,380 mm • Forks: 1,200 mm | Fork positioner: 1,400 mm • Tyres: Superelastic (100%) – Front 16x7x10½ / Rear 22x10x16 • Condition: 5/5 – rust-free, ready for work • Dimensions (mm): H 2,250 / L 1,550 / W 1,500 Ideal for: ✅ Narrow aisles | ✅ Wood, steel & tube industries | ✅ Long loads | ✅ Indoor & outdoor use Why FT LOGISTICS? For years, we have supplied forklifts that operate flawlessly across Europe 🌍. From small businesses to large industrial plants – we don’t just sell machines, we deliver peace of mind. Our advantages: Isdpfx Aey Staujb Njat ✅ Complete technical inspection & servicing ✅ In-house paint shop & workshop ✅ EU-wide transport 🚛 ✅ Operator training & functional testing ✅ After-sales & warranty service ✅ Fast leasing, even for startups ✅ Invoice in EUR or PLN ✅ Hundreds of satisfied customers 💯 FT LOGISTICS – Quality you can depend on. Service you can trust.