Used Plate Processor for sale (12,532)

Condition: good (used), Year of construction: 2003, Screw compressor, compressor, stationary air compressor, plate heat exchanger Lhsdpfx Aioz D T Tyjqjl -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 -Volume flow rate: 1.48 m³/min -Technical data: see photo of the nameplate -Number: 2x heat exchangers available -Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: Lsdpfetndpzox Aiqjhl - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm Lhsdpfezxt Trex Aiqsl weight 3,8 t

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor Ledpfx Aiswv Eazoqohl • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops • Condition: Very well maintained, immediately ready for operation

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. Ledpfozquq Asx Aiqohl MACHINE IS READY TO WORK.

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min Ledpoz Aun Sefx Aiqshl control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: plate roll Faccin, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 180 mm, roller (top) diameter: 200 mm, side roll diameter: 160 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 3,700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,000 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm Lhsdpfx Aszy Nv Eoiqel -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Dimension 3500 x1100 x H 1000 mm - weight 3700kgs

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Lsdpfx Aeztfxisiqjhl weight of the machine ca. 2 t

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 Ledpfeyym Tdsx Aiqjhl - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. Lhodpfxozz Rlke Aiqol This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Plate dimensions: Length: 1200mm Width: 800mm Lhodszuxt Nopfx Aiqsl Height: 160mm Height from the floor to the top edge of the plate: 860mm Center height: 200mm Flatness: DIN 876, accuracy class: 1

Condition: good (used), number of rollers: 3, roller (top) diameter: 130 mm, sheet thickness (max.): 3 mm, - Capacity: 1550 x 3 mm - Top roll diameter: 130 mm - Roll length: 1550 mm - 380V Lsdpfx Aiez Ayp Isqjhl

Condition: used, functionality: fully functional, Year of construction: 1986, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 260 mm, roller (top) diameter: 270 mm, side roll diameter: 260 mm, sheet thickness (max.): 16 mm, overall weight: 7,500 kg, total length: 4,040 mm, total width: 1,590 mm, total height: 2,095 mm, power: 11 kW (14.96 HP), Equipment: swiveling upper roller, Technical specifications: max. thickness of pre-bent rolled sheet: 16 mm, max. thickness of non-pre-bent rolled sheet: 12 mm, minimum rolling radius: 240 mm, maximum sheet width: 2000 mm. The machine is a three-roll machine – with an upper roll with a diameter of 270 mm and two lower rolls with a diameter of 260 mm, working speed for bending: 7.5 m/min, main motor power: 11 kW, total installed power: 18.1 kW, overall dimensions (L x W x H): 4040 x 1590 x 2095 mm, the weight of the sheet rolling machine is approximately 7,500 kg. The machine is currently disassembled in our warehouse in Přerov, where it can be tested if desired. Lsdpfx Asz Alf Usiqjhl

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6,5 mm distance between columns 3100 mm 1000 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 12,0 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,5 x 2,2 x 1,8 m Hydraulic guillotine shear with - cutting length adjustment - cutting angle adjustment Lhsdpfxoz Dky Re Aiqsl - support arms - squaring arm - rear enclosure - mobile material bin

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Ljdpfx Aiefh Dmzsqjhl Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: good (used), Year of construction: 1989, sheet width 2050 mm Lhsdpsz Dkzhefx Aiqsl plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C11008, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 3,000 mm Back gauge type: Electric Back gauge depth: 1,000 mm Lhjdpfxez Ebbus Aiqsl MACHINE DETAILS Drive type: Hydraulic Control: Conventional Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 1,950 mm Shipping weight: 7,500 kg Shipping packages: 1 unit EQUIPMENT Documentation Angle adjustment: Manual Shear gap adjustment: Manual Finger guard: Fixed

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Lhodpjzw Eyzefx Aiqsl Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, total height: 765 mm, overall weight: 850 kg, total width: 1,000 mm, total length: 1,500 mm, Measuring and marking plate Cast iron Precision surface plate Manufacturer: FUJITA Type:JIS B 7513 Ledpswr Umpofx Aiqehl Surface size: Length:1500mm Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll 2000x6 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, roller diameter: 165 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 600 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, -roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Lhodjzy N Afopfx Aiqol Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: Lhodpfx Aiour N A Neqel • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,500 mm, total length: 2,500 mm, overall weight: 4,000 kg, plate height: 300 mm, Granite Plate (Mytri) - Dimensions 2500 x 1500 x 300mm - Quality Class 1 (will be checked) - inkl. T-Slot and tailstocks Lsdozfxr Tepfx Aiqehl - with steel feet - working level 850 - 950mm

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. The machine is also equipped for bending profiles. Lhedozil Hfopfx Aiqjl

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Lodpfx Aezzn A Tjiqohl Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Lodoytawnspfx Aiqohl Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.