Used Polymac Polymac Rubber Veneer Machine Like New. for sale (76,510)

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. Pjdjymadnepfx Al Sepr New pointing machine: AVS63 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. Ppodpfoymac Rox Al Sjr New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Number of strokes: 560/min Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. Podpfxeymadhj Al Sspr We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: like new (used), glue thread sewing machine zigzag stitching Psdoyr Nmvepfx Al Sjpr pedal control arm clearance 650 mm 230V power supply

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 1,200 mm, overall weight: 2,000 kg, table width: 1,200 mm, Veneer Splicing Machine Manufacturer: Fisher Rückle Model: Impetum 1200 Year of manufacture: 2019 Ppedpfsymcu Nex Al Sor For gluing and tightly splicing parallel-aligned veneer strips in a single operation with standard urea adhesives. Splicing Performance Continuously adjustable feed speed, practical reference value approximately 20 - 30 m/min. Technical Data: Veneer strip lengths (along the grain): 380 - 3800 mm Veneer strip widths (across the grain): 45 - 1200 mm Veneer strip thicknesses: 0.4 - 1.5 mm Feed speed: 5 - 40 m/min Throat depth: approx. 1,200 mm Touch panel with temperature, speed, and pressure displays. Data storage for machine settings for repeat orders. Robust and virtually wear-free stainless steel transport chains. 6 heating zones for various temperature settings. Integrated cooling unit for glue pot cooling.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 571 EIT 9106/1149, clamping force: 2,500 kN, Injection molding machine REP S, floor dimensions 500 x 630 in working condition with clamping force 250t and injection capacity 968 cm3 Psdpeyb Icbsfx Al Sjpr

Condition: used, Used machine Equipment: - Cutting length 2500 mm - With handwheel tensioning Pedpfx Aloyncpis Sspr Availability: short-term Stock location: 63934 Röllbach

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 Ppedpfxow Ed U Ns Al Sjr CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: new, Year of construction: 2013, functionality: fully functional, This is a drill bit sharpening machine suitable for drill bits from 8 to 30 mm in diameter, with an adjustable point angle from 90° to 140°. Standard equipment includes a CBN grinding wheel for HSS drill bits (lasts for at least 3,000 drill bits). A diamond wheel is also available for carbide drill bits, offered at a price of €90.00. Sharpening a drill bit is completed in three steps. First, the drill bit is clamped in a fixture, followed by the sharpening and pointing processes. The entire procedure is finished in less than a minute! Before clamping the drill bit, the diameter is set on the grinding machine using a rotary dial. The drill bit is aligned and clamped with the appropriate collet in the fixture placed into the left-side mount of the machine. Sharpening the cutting edges and pointing is straightforward: switch on the machine, insert the fixture with the drill bit into the right-side mount, and gently rotate from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to sharpen the second cutting edge. Ppsdpfeyn Riwsx Al Ser Pointing is carried out in the same way, simply using the top mount. That’s it. Just switch off the machine and release the drill bit. A clever design combines an eccentric and a special grinding wheel, so there is no need to worry about the cutting edge shape or clearance angle. An additional advantage is that both cutting edges are produced with exactly the same settings, ensuring optimum edge symmetry. Furthermore, the point angle can be freely selected between 90° – 140° before sharpening. High-precision collets for diameters of 8 to 30 mm guarantee concentric clamping. The grinding wheel has a lifetime of over 3,000 operations. In addition to the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drill bits. Changing the wheel can be done in seconds with just a few simple steps. The compact design of the drill bit sharpening machine and its practical carrying handle allow for easy mobile use. As nearly all essential accessories such as collets, fixtures, or hex keys are stored on the machine, everything needed is always on hand. The drill bit sharpening machine is energy-efficient and space-saving. Sharpen drill bits without prior knowledge – clean, fast, and effective. Shipping weight: 25 kg 23 collets (8 – 30 mm) Standard CBN grinding wheel Machine dimensions: 350 x 290 x 220 mm

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device Psdehbp Ifopfx Al Sepr max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), Code: 0270 Brand: EMME ELLE Podpfeymfxqex Al Sepr Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: excellent (used), functionality: fully functional, glue thread sealer zigzag stitching clearance 630 mm heating element temperature adjustment foot pedal control power supply 230V year of manufacture 2001 Pedpoymn Hdofx Al Sepr CE marking

Condition: ready for operation (used), Year of construction: 1992, Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement. Ppodpfexxa Trox Al Ser

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Ppjdslf Hq Nspfx Al Ssr Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: good (used), Column projection 910 mm Feed approx. 15 m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English Ppjdpfx Aljqwzfis Sor 13.2.7.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Ppodpfewz Rifsx Al Ser Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Ppjdpfsyg N Enox Al Ser Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Weight kg 200

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Ppsdpfx Aljyg N Dws Ssr Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Podpfx Asvy Anxel Sspr Type: Vertical Drive: Hydraulic Machine for Rubber.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Used Spinner VC 1150, spindle replaced in November 2025 X travel: 1,150 mm Y travel: 620 mm Z travel: 800 mm Direct measuring systems on X/Y/Z axes Control: Siemens 840DE High-precision milling spindle up to 14,000 rpm as built-in motor spindle with direct drive (no belt), water-cooled Tool holder on spindle: SK 40 Pedoycc Hqopfx Al Sepr Machine operating hours: 22,954 Tool magazine with 32 tool stations as high-speed changer with double-arm gripper design and fast-moving tool chain

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Pedpfx Aevwfaxjl Sjpr

Condition: used, used manufactured by Kuper type Mini 420 Ppjdpfx Alsvwf Dwj Sor range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003, Empty weight: 6.500 kg Ppsdpfx Aox Elfiel Ssr Axle 1: left 10 mm right 16 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm We have the possibility to stack trailers! 

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Pjdpoyf Eucefx Al Sopr Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue Pjdpfx Aeyayumol Sjpr With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm