Used Polymac Polymac Rubber Veneer Machine Like New. for sale (76,704)

Condition: excellent (used), Insole Production Line – Clean Equipment List 🔹 Mixing Section 1. 25L Kneader Maker: Daeryunghwahan Year: 2016 Capacity: 25L Main motor: 37 kW Power: 380V / 3Ph / 60Hz 2. 14" Open Mill Maker: Daeryunghwahan Year: 2016 Capacity: 20–25 kg Main motor: 30 kW Power: 380V / 3Ph / 60Hz 🔹 Sheet Forming 3. 4 Roll Calender Maker: Shinhwa Year: 2012 Roll size: Ø300 × 850 mm Main motor: 30 kW Power: 380V / 3Ph / 60Hz 4. Cooling Drum For sheet cooling 🔹 Press Section (핵심) 5. Foam Press Maker: Taejung Year: 2016 Heating plate: 600 × 600 mm Main hydraulic motor: 15 kW Clamping force: 200 ton 6. Sheet Press (Model: XFP150-2) Maker: Taejung Year: 2018 Heating plate: 750 × 650 mm Servo hydraulic motor: 8.8 kW 7. Cooling Press Maker: Taejung Year: 2016 Cooling plate: 600 × 650 mm Clamping force: 200 ton 8. Form Press (Model: TZX-200-1-6S) Maker: Taejung Year: 2018 Frame plate: 800 × 600 mm Heating plate: 600 × 650 mm 🔹 Extrusion & Injection 9. Ø70 Extruder (Model: TY70) Maker: Shinjin Year: 2016 Capacity: 80 kg/hr Main motor: 15 kW 10. Injection Press (Model: SCVI-3.0-500ton) Maker: Shinchang Year: 2015 Heating plate: 750 × 800 mm Hydraulic motor: 22 kW 🔹 Cutting Section 11. Swing Cutting Machine (Model: DK-P2) Maker: Kukdong Year: 2016 Hydraulic motor: 1.5 kW 12. Thomson Press #1 (Model: TK-60DSA) Maker: TK Korea Year: 2017 Working size: 800 × 700 mm Clamping force: 200 ton 13. Thomson Press #2 (Model: TK-60DSA) Maker: TK Korea Year: 2017 Working size: 800 × 700 mm 🔹 Utility 14. Electric Oil Boiler (Model: FMOT-150) Maker: Taejung Iedpfx Absyl Dhuo Nsib Year: 2016 Heating capacity: 150 kW 🔹 Finishing 15. Skiving Machine Maker: Hongsang Year: 2016 Knife motor: 2.2 kW The whole production line is available for sale.

Condition: refurbished (used), Available rubber testing equipment Ijdjwmnlhspfx Ab Noib 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Iedpfxew Id S Se Ab Noib Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position Iiedjd S Uhqepfx Ab Nsb ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Year of construction: 1990, Kuper FW1150 veneer sewing machine, machine no. 30108291, built around 1990 Isdpfx Abjv Rvpwj Nsib

Condition: excellent (used), functionality: fully functional, first registration: 11/2017, empty load weight: 7,200 kg, maximum load weight: 12,000 kg, overall weight: 19,200 kg, color: orange, loading space volume: 18 m³, Year of construction: 2017, STECO CRV 2000 HD REFUSE COLLECTION BODY – DEMONSTRATION UNIT, LIKE NEW Price: 50% of the cost of a new body from the manufacturer | Promotion for 2026 For sale: a professional Steco CRV 2000 HD refuse collection body from the renowned manufacturer Kaoussis (Greece), designed for heavy-duty waste collection and service operations, including compatibility with underground systems such as Molok. The body is physically located at our site and is available immediately. The listed price includes loading with a crane. CONDITION & ORIGIN – EXCEPTIONAL OFFER - Demonstration / display unit - Never used in regular operation - Imported from Norway - Used solely as a showroom sample and for trade fair demonstrations - Fully customs cleared - Technical and visual condition very close to new - Our price is roughly 50% of the cost of a new body from the manufacturer. - Current promotion for the 2026 season – offer limited. TECHNICAL SPECIFICATION Model: Steco CRV 2000 HD Body capacity: 18 m³ Model year: 2018 Production: 2017 Serial/chassis number: 17061801 Certificate: CE Compliance: EN 1501-1 External dimensions: Length: 727 cm Width: 255 cm Height: front: 180 cm rear: 280 cm Weight: Unladen weight: 7,200 kg Payload: 18,800 kg CONSTRUCTION & TECHNICAL SOLUTIONS The Steco CRV 2000 HD is a heavy-duty body designed for long service life and easy maintenance: - Body with internal hydraulic cylinders - Central hydraulic unit located at the front of the body for easy service access - Rear hopper with: • control system • waste removal hatch - Removable chute for underground containers: • made from aluminum and rubber • easy one-person installation/removal • can be stored under the rear tailgate LIFTING SYSTEMS & CONTAINER HANDLING - Container winch: • locking mechanism • shaking system for easier emptying - Boom for automatic closing of containers after emptying - Compatible with all available underground systems. INTEGRATED WASHING SYSTEM – "ALL-IN-ONE" SOLUTION The body allows simultaneous emptying and washing of containers: - Washing system for bottom-emptied containers - Inverted washing - Fresh water tank: 800 l - Waste water tank: 800 l - External high-pressure washer Ideal solution for municipal service companies seeking time and resource savings. Ijdpfexivtpjx Ab Nsib ADDITIONAL INFORMATION - Video available showing actual operation with crane SUMMARY A rarely available opportunity to purchase a virtually new, demonstration-class heavy-duty refuse body from a trusted brand, in excellent condition, at a significantly lower price than new, and immediately available. This unit is ideal for municipalities, waste management operators, and companies servicing underground container systems. The price is net and applies to export and companies. Substantial discount possible for private customers – Direct phone contact encouraged to get your best price :)

Condition: excellent (used), Various ZEISS friction wheels (new rubberized) in different sizes according to the illustration in the offer. Data and price: On request! Ijdpedy Apxefx Ab Noib We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Iiodpfx Aewka Rdob Njb Clamping by handwheel integrated suction unit Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, Used machine Used veneer splicing machine of the company Kuper type FW 1150 passage width: 1150 mm feed speed: approx. 10 - 30 m/min Veneer thicknesses: 0.3 - 3 mm without tables in front and behind Availability: short term Location: Röllbach Iisdpswka Rkjfx Ab Njb

Condition: used, Year of construction: 1990, PN-370 Pomini-Farrel Rubber Mixer Iijdpfxjwmnfhj Ab Njb Tangible Available complete with gearbox, 2 x DC motors, oil scale, fur scale, chemical scale, and batch feeder Description attached!

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Ijdeuna E Hspfx Ab Nsib

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Iisdjum R Agepfx Ab Nsb

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Iijdst Akcfjpfx Ab Njb Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: used, Year of construction: 2011, machine/vehicle number: AVZ80-160-315/29264/11-01, Adelmann Umwelt GmbH Rubber shredder Iodpfx Abouab Dms Nsib

Condition: excellent (used), functionality: fully functional, mileage: 100 km, Year of construction: 2021, Flushing/mixing unit sporadically used. Compatible with Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a fluid management and drilling fluid mixing system, used for pipe ramming and horizontal directional drilling (HDD) applications. Year of manufacture: 2021. Mud tank/drilling fluid tank capacity: 200 gallons (approx. 757 L) Maximum fluid flow to drilling unit: 18 gpm (approx. 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Standard dimensions: - Length: 1.85 m / with hose and valve: 2.13 m Iisdjxrppcepfx Ab Nob - Width: 0.813 m - Height: 1.36 m Dry weight: approx. 182 kg Weight with filled tank (full with water): approx. 939 kg The unit features a narrow tank, allowing it to be positioned alongside a drill rig on a trailer – facilitating easy transport to the jobsite. It is equipped with a venturi wet hopper for effective mixing of additives with the fluid, expediting mixing cycles. The design is relatively straightforward, with several configuration options to adapt the equipment to various field setups. The FT5 series is part of the Ditch Witch fluid management systems line. The listed price is net and applies to export and companies. Significant discount possible for private customers. We invite you to contact us directly by phone to get your best price!

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Very good condition. Available immediately. Iiedpfxevxvc Ho Ab Njb

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Iisdpfxsxncrvj Ab Nsb Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: like new (used), Year of construction: 2020, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, number of injections: 1, Excellent rubber injection moulding machine in mint condition, year 2020. Very few operating hours, in mint condition. Closing force 600 tons Injection volume 2500 cc Heater blades 1200 x 1300 mm Ijdetu H Stepfx Ab Noib FIFO injection system 2500 bar Core lifting moving plate Core lifter fixed plate Data backup on CF card Energy reduction by servo pump control

Condition: new, Sind Hamburger forming machine, NEW Ijdpfxjg Anpqe Ab Nsib

Condition: ready for operation (used), Consisting of: full tools, books and accessories available Technical Data Working range -base machine with electric equipment -in feed unit, MR -book bloc in feed with splitter Ijdpfxsq Aufqe Ab Neib -gluing unit -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery 370mm x 270mm x 80mm max 125mm x 100mm x 6mm min 14 – 36 cycles per minute

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Iiedpfxsxdmgvj Ab Neb CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Iiedpfxjurhx No Ab Nsb Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: used, Gebr. Thiel Duplex 159 Universal Milling Machine with DRO High quality German-built Gebr. Thiel Duplex 159 universal milling machine in good used industrial condition. Precision toolroom machine fitted with Newall digital readout (DRO), swivel vice and universal milling head. Well regarded for accuracy, rigidity and versatility, these machines are ideal for toolrooms, precision engineering, prototyping, maintenance workshops and general machining applications. Machine Details: Manufacturer: Gebr. Thiel GmbH Model: Duplex 159 Universal milling machine 380V 3 phase Newall DRO fitted Swivel machine vice included Universal adjustable milling head Horizontal and vertical milling capability Coolant tray and lubrication system Iisdpfx Ajy R D E Eeb Nob Features: Precision table feeds Heavy cast iron construction Fine feed controls Toolroom quality machine Ideal for precision engineering work Condition: Good used workshop condition with normal cosmetic wear for age. Machine is complete and operational. A highly sought after universal milling machine with excellent build quality. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Made in Germany. Iedpfxey Sfa To Ab Noib Technical specifications: 1 head Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included.

Condition: used, mileage: 88 km, power: 353 kW (479.95 HP), first registration: 03/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 12,000 mm, total width: 2,550 mm, loading space length: 9,170 mm, loading space width: 2,550 mm, loading space height: 1,200 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Remote central locking - Refrigerator - Lift axle - Air suspension - Radio - Reversing camera - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater - Toolbox = Remarks = Daf FAX XF 8x2 with lift and steering axle. 570 cm wheelbase. Galvanized loading ramp body. Total loading floor: 917 cm. Double hydraulic loading ramps: 375 cm. Hydraulically adjustable against each other. Recessed lashing eyes in 4 x tie-down rails along the entire length. 3 stainless steel toolboxes. Bamboo hardwood floor. 2 x work lamps on the bulkhead. 2 x work lamps under the sloped section. 3,500 kg ball coupling. Reversing camera. = Further information = Technical information Number of cylinders: 6 Iijdpfx Ajyuu T Hjb Nsb Axle configuration Brakes: disc brakes Front axle 1: Tire size: 385/55R22.5; Steering; Tread left: 100%; Tread right: 100%; Suspension: leaf suspension Front axle 2: Tire size: 385/55R22.5; Steering; Tread left: 100%; Tread right: 100%; Suspension: leaf suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tread left inside: 100%; Tread left outside: 100%; Tread right inside: 100%; Tread right outside: 100%; Suspension: leaf suspension Rear axle 2: Tire size: 355/50R22.5; Steering; Tread left: 100%; Tread right: 100%; Suspension: air suspension Weights Unladen weight: 13,420 kg Payload: 21,580 kg Gross vehicle weight (GVW): 35,000 kg Maintenance APK (Main technical inspection): valid until 03/2027 Identification Type number: XF 480 / 8x2 / OPRIJ- MACHINETRA = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We do our best to provide correct information, but no rights can be derived from the texts provided.