Used Punching Automaton - Transfer Press for sale (15,622)

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Lotus LTS 14’ heat transfer press Item for sale: 1x Lotus LTS 14: Condition: Nwjdsywtz Aspfx Akuog This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested and is in working order Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT Njdpfxjxwp Nye Akuowg There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm with various punching tools Njdjd D Ryfjpfx Akuswg

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Nwodpeyvvkwsfx Akujg Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz Nwedpjx U Eiaofx Akuog - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing, press feeding and metal forming systems, delivering high-performance and customized industrial solutions worldwide. Our press solutions are designed for punching, perforating, embossing and sheet metal forming applications. Depending on production requirements, we offer advanced servo punch press systems for flexible programmable production and high-speed mechanical presses for continuous mass production. These machines can be supplied as standalone units or integrated into complete coil-fed automatic production lines. ⚙️ AVAILABLE PRESS SOLUTIONS 🔹 SERVO PUNCH PRESS The Servo Punch Press is designed for precision, flexibility and intelligent production control. Key Features: 40 Ton punching capacity 6 tool stations for multi-tool operation Dual-servo controlled X-Y punching system Punching at programmable coordinates 22 kW hydraulic punching drive Up to 90 strokes per minute Automatic scrap conveyor system Advantages: High precision punching performance Programmable motion profiles Lower noise and reduced maintenance Energy efficient operation Fast setup for different part designs 🔹 PERFORATION HIGH SPEED MECHANICAL PRESS The High-Speed Mechanical Press is ideal for continuous perforation, embossing and repetitive punching operations in mass production environments. Suitable For: Sheet metal punching Perforating Embossing Tool & die applications High-volume production lines Advantages: High production speed Stable continuous operation Reliable mechanical drive system Ideal for repetitive operations Cost-effective mass production solution Nsdpjy Anr Tefx Akuewg 🔧 ENGINEERING FEATURES Robust industrial machine construction PLC & HMI control systems Easy integration with feeders and automation lines Tooling flexibility based on product design Long service life and low maintenance structure ⚡ OPERATIONAL ADVANTAGES Two technologies for different production needs Flexible solutions from custom parts to mass production Standalone or turnkey line integration Improved efficiency and reduced downtime Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Sheet metal manufacturing Perforated panel production Electrical cabinets HVAC products Construction components Automotive parts White goods industry 🧩 OPTIONAL CONFIGURATIONS Coil feeding integration Decoiler & feeder systems Custom dies and tooling Conveyor systems Automation upgrades Turnkey production solutions 📸 REFERENCE PROJECTS Images and videos can be shared showing different press systems successfully operating in various industrial applications. Additional references and technical details are available upon request.

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg Nedpsyv Nvajfx Akuowg dimensions 1500 x 650 x 1700 mm

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg Nsdpfxjyv Nuij Akujwg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Accessories / equipment: - punching table Nwsdsyv Nrzjpfx Akuog

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min Nwjdpoyv Ncyofx Akujg total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm throat 500 mm stroke 60 mm 38 /min. engine output 5 kW 20x20 mm 28x11 mm Overall size 1500x1100x2000 mm Nwodpfxoyv Nxho Akueg weight of the machine ca. 1.150 kg Accessories / equipment: - punching table

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz Nwodshlnzkopfx Akueg - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Nwodek S Htxspfx Akueg Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet Njdpfx Asxaaipokujwg - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Nwodpfxedzqmzj Akujg Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Njdpfeh U Dtuex Akuowg Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Nwsdpfx Aksik Srwjueg Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine space requirement L x W x H 900 x 600 x 1700 mm weight 530 kg very good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 Nwjdpefim Thofx Akuog pressure force 125 ton. throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Nsdpfx Akjr I E Itsuowg Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Nwjdpexz Ugxofx Akuog Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: good (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 Njdjgryc Nopfx Akuowg High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Njdpfxsq N Et No Akujwg Lateral passage 460 m Hits per min. 40,180 Min. 460 mm Transfer DGM

Condition: new, Year of construction: 2025, neu 2025 090185 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Nsdpfx Aowirmbskuewg Gantry punching station for increased productivity and operation comfort € 710,-

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Nwjdpfxexq Exwo Akuog

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Nwjdew U T Uvspfx Akujg