Used Python-G(Rinder) for sale (36,712)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Bjdpfjd Tiu Esx Af Hown Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: excellent (used), Flat grinder LTF with magnet mm 250x150 Bwedpfx Aoxw H S Ssf Hjn

Condition: excellent (used), Double bench grinder Bwodpeywbatsfx Af Hon

Condition: ready for operation (used), G & N Kugelmüller MPS 1 / Cup Grinding Machine - Spindle speed: 3,150 rpm - Magnetic chuck: 200x100 mm Bsdpfeypivxjx Af Hjwn - Grinding height above magnet: 130 mm - Side-mounted wheel dressing device - Fine adjustment - Coolant system through the grinding spindle - Drive motor: 0.6 kW - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.8 meters / Weight 180 kg Errors and omissions excepted.

Condition: used, Centerless grinder, made by CINCINNATI Bwsdpfxjymcnvj Af Hen Bars diameter : 8 - 35 mm Bars diameter: 8 - 35 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Centres 5200 mm Cambering Bwodpfx Aoxvrptsf Hsn Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect.

Condition: good (used), Year of construction: 2006, G. Mondini with 2 heads. Type VF/SPE-2. Year of manufacture - 2006 Piston dimensions - Diameter - 80mm. Length - 230mm. Bjdpfx Astp I Rnef Hswn Volume approx 1000ml, completely stainless steel. click on photos for more photos.

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Bwjdpfjm Sg Hcex Af Hjn

Condition: excellent (used), 1 x Butcher Boy 42 Mixer grinder. Bwedpfex Swyxjx Af Hsn

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages Bedpovxz Axsfx Af Hjwn The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Year of construction: 1990, condition: reconditioned (used), Year of renovation: 2010 Output kVa: 1375 Volt: 6300 V Total weight: 74000 kg Bjdpeini Hwefx Af Hswn Other information: 1,16 MW Diesel Generator, Completely renewed

Condition: good (used), Technical data for the wide span shelf truss: Shelving system: Jung Heinrich Type: G Included in delivery are: 01x wide span shelf truss, used Material color: RAL 1007 yellow Bwsdpfx Afsgqu H Nj Hsn Z-profile: 50 x 30 mm agraffe: 3 HK (hooks) clear width: 2.145 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Bedpfx Aox N Nlzof Hewn

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Bodpfx Afsubbp Sj Hewn AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Bwsdpfx Afenzib Ee Hsn Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Bwsdpfxonzkvhj Af Hon Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Email for latest factory build availability

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Bjdpfx Afenzh Uio Hewn Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Bwjdpfx Afjnzh T No Hjn Stepless variable hydraulic system Quantitive lubrication system Back water splash shield

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments Bwjdpfx Afeubbqio Hen 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: good (used), G&N Kugelmüller MPS 1 Cup Grinding Machine from University - Spindle speed 3150 rpm - Grinding height above magnet approx. 130 mm - Magnetic chuck 200x100 mm - Side-mounted wheel dresser - Fine adjustment - Drive motor 0.6 kW Bwodeyc Hmnspfx Af Hsn - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150 kg Subject to errors and input mistakes.

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-IWRC -Length: 44 m -Number: 2x wire rope available -Price: per piece Bwedpfx Aevw S Ayjf Hsn -also other crane ropes: available -Transport dimensions: Ø 850 x 510 mm -Weight: 126 kg/piece

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-IWRC with 1x full thimble see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available Bwsdpfx Afovw Svys Hsn -Transport dimensions: Ø 750 x 450 mm / Ø 745 x 465 mm -Weight: 114 kg /pc. / 108 kg/pc.

Condition: excellent (used), Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS -Length: 82 m -Number: 6 wire rope drums available Bedpfjvxfkyjx Af Hewn -Price: per drum -Transport dimensions: Ø 850 x 490 mm -Weight: 192 kg/piece

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope Bwedpfxjvxfl Rs Af Hen -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS-SFC with 1x loop see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 800 x 570 mm -Weight: 110 kg/piece

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Bodpfjlbmm Eox Af Hewn Dimensions (LxWxH): 1435 x 1100 x 1510 mm