Used Reform Knife Edge Honing for sale (5,199)

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Ijdpekvnc Sjfx Ab Nsat Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard Isdpfxewq Hp Tj Ab Nsat There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width Iaedpewq Hqksfx Ab Net 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, functionality: fully functional, This listing is for a second-hand Canon accessory: the ‘Canon 2-Knife Trimmer A1’ Compatible with various Canon imagePRESS models Condition: Iajdpfey R Nn Sex Ab Net This is a second-hand item, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sturdy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Iedpfjy R N Ixsx Ab Neat Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: used, Year of construction: 2003, total height: 1,750 mm, total length: 6,000 mm, total width: 1,600 mm, Colour: Grey Weight: 3.000 kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 470/0-303 - Number of units [pcs]: 8 - └ 1st unit type: - - Tools available: No - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes Iedpfx Absyz Uu Ee Noat - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - └ 8th unit type: - - Tools available: Yes - Voltage [V]: 400 - Transport dimensions: 6000mm x 1600mm x 1750mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm Iodju R Sy Aspfx Ab Neat - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: excellent (used), KS2400 with oscillating swivel function Iaedpfx Aboy Su Hij Nst

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm Iaodpjy Rt Aaefx Ab Not -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) Iajdpfxjy Su Itj Ab Net - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, amount 20 weight 0,5 kg Iodpfx Absy Spv Ss Njat material HSS

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW Iedpfswffpbjx Ab Noat table: schwenkbar Dust suction hood 100 mm

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Iasdpjw Tfw Hofx Ab Net Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm Iedpfx Aoy Sap Aeb Njat - Operating voltage: 400 V - Supply voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Incl. sanding belts: 12 pcs grit 120; 4 pcs grit 80; 10 pcs grit 150

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Ijdpfx Asy Sp Hdsb Njat Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: excellent (used), Year of construction: 2016, last calibration 2020 Iodpfjy Stxwjx Ab Noat

Condition: excellent (used), Professional industrial chamfering and deburring bench machine from the renowned German manufacturer deNegro, in cooperation with Hahn & Kolb Stuttgart. This device is designed for chamfering, deburring, and edge processing of metal parts. The robust, heavy-duty workshop construction ensures stable and precise operation. The machine features an adjustable guide and a two-speed rotational switch. It is an ideal solution for locksmith workshops, toolrooms, and production environments. Condition: Used. Iedpfxjy Swlhe Ab Nsat The machine is in good working order and shows normal signs of use as visible in the photos. Technical specifications: Manufacturer: deNegro Distributor: Hahn & Kolb Stuttgart Model: DK 40-42 Power supply: 380V Power: 0.26 / 0.37 kW Speed: 1,400 / 2,800 rpm Frequency: 50 Hz Protection class: IP54 2-speed switch Adjustable guide Stable steel worktop 16A industrial power plug Applications: - Chamfering edges - Deburring metal parts - Machining steel components - Locksmith workshops - Toolrooms - Production and maintenance

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Iaedpfey H Itfjx Ab Nst Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Iaedpfsy Spclsx Ab Njt Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Iedpfx Aboyn Ilpe Noat Subject to incorrectly published technical data.

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Iaedpsu Racxsfx Ab Net Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Edge press for solid wood stripes Heat in the plate Iasdpfjma Ayrox Ab Not Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Isdpfsb A Nmdox Ab Neat -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with a rolling block chain (instead of standard chain), extended mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Comprises: Edgebanding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / infeed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Iaodpfx Ajwvlhleb Nst

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm • Useful width: 1,300 mm Isdpfx Asw H Aw Seb Nsat • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)