Used Revicart Faro 2200 for sale (1,930)

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Hodpfezuy Arox Akrenu

Condition: used, Year of construction: 2006, Fine Cut cutting rotor, Claas operator terminal, automatic central lubrication system, air brake system, wide-angle PTO shaft, hydraulic crop discharge system, tire size 520/50-17. Hjdpfx Akjz R U Easrenu

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm Hnjdpfx Aksz Ef Iforju 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), Year of construction: 2006, Arburg 570C 2200-1300 / Hybrid Machine Year of manufacture: 07.2006 Hnedpfxez Ip U Uj Akrsu Injection unit: Screw diameter: 55 mm Shot weight: 469 g Injection pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of the platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Controller: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Maximum turning diameter over bed: 690 mm Hsdpfxoy Uk Eae Akronu SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm CARRIAGE X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: new, Year of construction: 2024 Applicable material: Fuel Hnodpfjz Sz Aysx Akreu

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26923, Technical specifications Manufacturer: FARO Type: GAGE PLUS Year of manufacture: 2011 Certificate date: 02/04/2021 Revision: 28.1 Serial number: F04-02-11-26923 Accuracy: 5+8L/1000 (µm) The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! Hodsich H Ropfx Akrenu (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 2011, condition: excellent (used), machine/vehicle number: F04-02-11-26919, Technical Data Manufacturer: FARO Type: GAGE PLUS Year of Manufacture: 2011 Certificate Date: 03/02/2020 Revision: 28.1 Serial Number: F04-02-11-26919 Accuracy: 5+8L/1000 (µm) The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Hodsich H Ajpfx Akrenu Note: Our offer is exclusively for professional customers! (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale!)

Condition: good (used), Year of construction: 1994, The feed hydraulic pump is missing. Otherwise, the machine is operational. Hodpfx Ajxn Ukkekrenu

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 Hjdpfx Akjx Nkp Isronu • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: used, Year of construction: 1997, functionality: fully functional, System consisting of: Welding robot Romat 310, ROTROL 32 TM controller and programming handset with cable, connecting cable for robot control cabinet Pedestal for robot Tactile sensor, arc seam tracking Drive for Micro SD card for program backup incl. 2 cards Quinto 503 welding machine, wire feeder Welding torch MRW 380, torch hose package Duo drive wire feed unit, torch testing gauge 15 kg wire spool holder, drum equipment Hedpfx Asyh Hl Sskronu Mechanical cleaning, pressure booster 2-station rotary table 4 DP 2200 (load capacity 220 kg per station) 5 m connecting cable to control cabinet 1 light barrier 1 pre-selection start Wiring diagrams Documentation, functional warranty Delivery date: immediately available

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: Hnedpfxsziixrj Akrou 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2017, operating hours: 3,561 h, functionality: fully functional, power: 80.17 kW (109.00 HP), fuel type: diesel, fuel: diesel, gearing type: hydrostat, Equipment: soot filter, HAKO Citymaster 2200 Hnedpfx Akez D D Iusreu Municipal utility vehicle with a 2-brush vacuum sweeping unit This Hako Citymaster 2200 was first put into operation in 2017 and has approximately 3,561 total operating hours / 2,442 hydraulic hours / 31,405 km according to the meter. It is in a well-maintained overall condition with the usual signs of wear and tear, has just had a minor service, and is ready for immediate use. Comparable new price: €180,000! The sale is for a used machine and excludes any returns, warranty, or guarantee. - Net price: €29,900 // Gross price: €39,900 - Inspection / test drive is possible - Shipping can be arranged throughout the country; the costs depend on the distance! - We would be happy to have our leasing partner prepare an attractive leasing / financing offer for you!

Condition: like new (used), Year of construction: 2006, Clamping force: 220 tons Opening stroke: 650 mm Mould height: 300 mm Clamping platen daylight: 950 mm Tie bar daylight: 570 x 570 mm Mould clamping plattens (b x h) : 795 x 795 mm Ejector stroke: 225 mm Screw diameter: 50 mm Screw stroke: 200 mm Hsdpfx Akszwlbferonu Injection volume: 392 cm3 Shot weight: 359 g Injection pressure: 2000 bar Working hours: 10.444 Core pullers: 1x

Condition: new, Year of construction: 2024, suitable for Torion 956, volume 1210 l, steel edge guard, with gravel teeth. Hjdpfx Asz Sc Daskronu

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Hnjdpfx Asw U A Rmokrou Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: ready for operation (used), AEG Double Grinding and Polishing Machine – Model DP 300/2200 Hodpjztaw Hsfx Akronu -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. disc width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: L x W x H 1.2 x 0.4 x 0.9 meters / Weight 180 kg Errors and omissions excepted.

Condition: used, Year of construction: 2020, 12 rows, disc coulters, 50 cm row spacing, hydraulically foldable, rubber press wheels, 2 hydraulic furrow openers, Väderstad front hopper FH 2200, serial number FH00000610. Hjdpfjz S I D Rox Akrsnu

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Hsdpfswzx Tfjx Akronu

Condition: good (used), Year of construction: 2000, CNC Machining Center IBARMIA ZV 40, L 2200 Year of manufacture: 2000 ————— Technical data: Hnjdpjzv Sk Rofx Akreu X-axis: 2200 mm Z-axis: 600 mm Y-axis: 600 mm WORK TABLE Number of T-slots: 5 Size of T-slots: 18 mm Distance between T-slots: 125 mm Minimum/maximum distance spindle nose/table (optional): 200 (800/1000) mm WORKING SPINDLE Tool holder: SK 40 DIN 69871 Pull stud for tool holder SK: DIN 69872 Tool clamping force SK: 12,000 N Inner bearing diameter: 80 mm Max. standard speed: 8,000 min⁻¹ DRIVE POWER Main spindle motor at 100% (intermittent): 29 (38.5) kW Constant power at standard version from: 1,500 min⁻¹ FEED Power in X, Y, Z at 100% (intermittent): 13,000 (16,000) N Rapid traverse rate in X, Y, Z: 30 m/min Max. working feed rate in X, Y, Z: 10 m/min PERFORMANCE Milling performance in steel St 60: 650 cm³/min Drilling performance in steel St 60: Ø 60 mm Thread cutting performance in steel St 60: M36 TOOL MAGAZINE Number of tool positions (optional): 24 (40–52) Tool length max.: 300 mm Tool weight max.: 10 kg Tool diameter max. with full magazine: 85 mm Tool diameter max. with free adjacent positions: 125 mm Tool management: Random Tool change time: 3.5 s Tool change time "chip-to-chip": 7 s GENERAL Structural paint in 2 colors: RAL gray 7037 / blue 5012 Electrical connection: 55 kW Operating voltage: 400 V / 50 Hz Compressed air connection: 6 bar Coolant pump: 0.75 kW

Year of construction: 2004, operating hours: 4,611 h, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 3,000 rpm, table load: 7,200 kg, number of axes: 3, This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details. Hjdpfxezv Ubre Akrjnu • Table size: 2,200 × 1,000 mm Technical Specification Taper Size SK 50

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Grooving parquet machine ZEFIRO - automatic producing of the grooves on the plywood back side of parquet boards. Useful length 2400 mm. Entry belt conveyor included. Hnedsx Rrqvspfx Akrsu

Condition: good (used), Year of construction: 2005, functionality: fully functional, LINDNER KOMET 2200 SHREDDER Shredder for Refuse-Derived Fuel (RDF) and plastic Two 132 kW motors Number of blades on the rotor: 60 Blade dimensions: 175 x 57 x 28 mm Number of fixed blades: 12 Screen with a 30 mm hole diameter Production: 7 tons per hour Year: 2005 Hnodpfx Aezd Hqhskrju

Condition: used, Year of construction: 2023, Tires: 435/50 R19.5, discharge on the left and right sides at the front, 2 mixing screws, magnet on the mixing screw, electric weighing system, support leg, towing eyelets for top attachment, hydraulic brake, PTO shaft. Hedpfx Akez Sdg Njrjnu

Condition: good (used), Year of construction: 2019, operating hours: 2,662 h, functionality: fully functional, power: 80.17 kW (109.00 HP), fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Equipment: soot filter, HAKO Citymaster 2200 Municipal equipment carrier with a 3-brush suction sweeper unit This Hako Citymaster 2200 was first put into operation in 2019 and has approximately 2,662 total operating hours / 1,610 hydraulic hours / 22,980 km according to the meter. It is in good overall condition with the usual signs of wear and tear, has just undergone a minor service, and is ready for immediate use. Comparable new price: €180,000! The sale is of a used machine and excludes any right of return, warranty, or guarantee. - Net price: €33,529 // Gross price: €39,900 Hodpfoz D D Emsx Akrenu - Inspection / test drive is possible - Shipping can be arranged nationwide; the costs depend on the distance! - We will gladly have our leasing partner prepare an attractive leasing/financing offer for you!