Used Rohs Usb/Kbw/Rs232 for sale (3,900)

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Chodpsuv Eudefx Ahmec Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution Chsdofp A I Espfx Ahmjc 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Codsyzhlqjpfx Ahmshc Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Chsdjlfilyepfx Ahmsc Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: excellent (used), LDS Dactron COMET USB Shaker Control System Type: COM 200 Chodjy Ugrpspfx Ahmjc Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, Type COM 200, for controlling electrodynamic vibration testing systems. The system is suitable for random, sine, and shock tests in laboratories, industrial settings, automotive applications, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration testing systems Software / Functions Installed software according to system display: Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Connections USB port BNC connectors Power connection Further connections, see images Calibration Calibration data according to label: Calibration Date: 2010-09-21 Due Date: 2011-09-21 The calibration has expired. A new calibration can be performed by the buyer if required. Condition Used equipment from an industrial application. Optical condition, see images. Normal signs of use and storage are present. The device was switched on. The indicator light and software display are active. Further functional or calibration tests have not been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable according to images Accessories according to images Scope of delivery includes only the items shown in the images. Notes Inspection possible by arrangement. Loading and shipping possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Codpszgb Awefx Ahmshc Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz Cedpfeyil Dvox Ahmshc - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) Csdpoty A Ehofx Ahmshc - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 250 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DVK System Master 1 RE was manufactured in 2020. It features a robust working area with X-axis travel of 250 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 25 kW spindle and an automatic tool changer with a capacity of 32 tools. If you are looking to get high-quality machining capabilities, consider the DVK System Master 1 RE horizontal machining centre we have for sale. Contact us for further details. • CNC control: FANUC CNC with 10.4" colour operator panel, PLC, Ethernet connectivity, dedicated machine software • CE certified • Working area: • Birotational clamping vise axes: A-axis 360° continuous, B-axis 360° continuous • Spindle: • Type: OMLAT electrospindle • Torque: 80 Nm • Tool interface: HSK-A63 Chjdpfezp Hndjx Ahmsc • Tool magazine/ATC: • Automatic tool changer • Max tool diameter: 70 mm (150 mm with adjacent pockets free) • Random tool selection • Clamping system: • Self-centering birotational hydraulic vise • Jaw stroke: 50 mm • Clamping force: 5,000–30,000 N • Cooling & lubrication and services: • Liquid-cooled spindle • Centralized automatic grease lubrication • Pneumatic system • Hydraulic system • Air-water heat exchanger • Machine pressurization system • Machine data: • Installed power: 55 kW • Supply voltage: 400 V / 50 Hz Additional equipment • Robot automation: • FANUC M20iA/20M anthropomorphic robot, 6 axes, 20 kg payload • Schunk PGN125 two-jaw gripper • Pallet system: • Two vertical pallet magazines • Pallet size: 480 × 300 mm • 54 pallet positions per magazine (standard) • Chip/coolant and extraction: • Internal coolant through spindle • 60 µm cartridge filter • MAHLE self-cleaning 60 µm filter • Rain-type work area washing system • Chip conveyor with drag chain and rotofilter • Coolant chiller • Oil mist extraction system • Measurement, monitoring and accuracy: • Marposs 3D radio probe • Laser tool presetter • Thermal compensation on X, Y and Z axes • Optical scales on X, Y and Z axes • Tool life monitoring • Extended work coordinate system (48 additional offsets) • Artificial vision system with 2 cameras • Clamping enhancement: • Pressure-controlled hydraulic clamping • Included auxiliary equipment: • Bonfiglio MROTOS 8555 4 E LRSA industrial parts washer, robot integrated • Automator ADP5090 dot peen marking system with AC500 controller, robot integrated: • Marking area: 50 × 90 mm • Pneumatic marking head • Connectivity: Ethernet / USB / RS232 / RS485 • Touch-screen AC500 controller • Marking speed up to 10 characters/second • Additional Machine Information: • The machine has recently been fully serviced/revised by the manufacturer. • The spindle was also included in the recent manufacturer service. • The machine has always been used for machining aluminium. • The machine is currently not in production due to a change in the type of parts being manufactured.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English Csdpfx Aszuynhohmshc User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Chjdpez Dvfxsfx Ahmoc Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: used, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” 6 units available Chodpfx Aozhnxuohmjc Manufacturer: Zebra Technologies Model: ZT230 Printing process: Thermal transfer / Direct thermal Resolution: 203 dpi Print width: up to 104 mm Print speed: up to 152 mm/s Interfaces: USB, RS232, Ethernet (optional) Material compatibility: Labels, continuous material Special features: Robust metal housing, LCD display

Condition: used, mileage: 287,000 km, first registration: 10/2018, fuel type: diesel, number of seats: 36, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Our internal number: 1171 * S 511 HD * NEWLY PAINTED * PICK-UP PRICE - Price for collection * Well-maintained vehicle * CLUB BUS with tables * Low mileage (inspection report available) * 290 kW / EURO 6 * Automatic transmission * Retarder * Air conditioning * Auxiliary heater * Large roof hatches * 36 seats * Armrests between the seats * USB sockets * Footrests * Folding tables * Navigation system * Central aisle camera * SUITABLE FOR REGULAR ROUTES with standing room * Trunk lid – lifting mechanism * Ski carrier/roof box preparation at the rear * Front camera – installed * Fire alarm system / extinguishing system installed * Minor dents on the vehicle. Chjdpjyhuczjfx Ahmsc * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information is subject to change without notice * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: used, This listing is for a Metrohm 719S Titrino with 20ml burette and 728 Stirrer Csdpfx Ahsxzg Iuomshc

Condition: used, mileage: 1,900 km, power: 353 kW (479.95 HP), first registration: 05/2026, fuel type: diesel, number of seats: 51, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, onboard kitchen, parking heater, soot filter, 2 in stock - Identical models MAN Lion’s Coach - R07 - 12.10 meters New vehicle, not yet registered - Manufacturer’s warranty 24 months / 12 months Upon request, FULL WARRANTY from MAN - 48 months or 320,000 km from initial registration. We would be happy to send you the detailed specifications by email. Highlights: Codpfxjy T Ayge Ahmshc * MAN engine, 12,419 cc, 353 kW * MAN TipTronic, 12 gears * 49 reclining seats * Driver’s seat + co-driver’s seat * LED headlights * Navigation system * USB ports at all seats * Toilet * Kitchen * All assistance systems * Alloy wheels * etc. Vehicles are available immediately in 85235 Odelzhausen. Driver’s sleeping area * Kitchen * Cooler box * Navigation system * Reclining seats * Auxiliary heater * TV * Toilet Speed regulation: Adaptive cruise control Air conditioning: Automatic climate control * Stationary air conditioning system Safety: ABS * Retarder/Intarder ---- Inspection and test drives are possible at any time! If you have any questions, please do not hesitate to contact us. Visit our website as well. Errors and prior sale are subject to change. ---- Opening hours: Monday - Friday, 9:00 a.m. - 3:00 p.m. Also available by appointment. ---- Information on data protection can be found at:

Condition: used, mileage: 107,000 km, power: 335 kW (455.47 HP), first registration: 04/2024, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 04/2027, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Setra 516 HD with 48 + 2 + 1 reclining seats, original 107,000 km - automatic transmission - * Diesel - 10,667 cc - 335 kW - 455 hp - Euro 6 E - Green environmental badge - TÜV (German vehicle inspection) * 360° rear view camera - 2.3 kW inverter - USB port at each seat - adaptive cruise control * Xenon headlights - footrests - folding tables - reading lights - luggage nets - retarder - * Auxiliary heater / radio / ABS / ASR - 2 x 19-inch screens - toilet - onboard kitchen - WIFI / WLAN - * Vehicle dimensions: Length: 13,115 mm x Width: 2,550 mm x Height: 3,770 mm * German vehicle - German vehicle registration document - Sale on behalf of a customer - * Errors / typos and prior sale reserved * Please arrange an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicle is stored off-site - Please inquire about the exact location - ATTENTION - Chodpfx Ahoz Iu T Ajmjc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Chodoyfvhgjpfx Ahmjc Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: used, This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition and is ready for immediate release. Chodjyk Dwyopfx Ahmec The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters. Key Features: - Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality assessments. - pH Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of samples. - Temperature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental conditions. - Versatile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH channel. - Ultra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water applications. - Temperature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C). - Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample conditions. - User-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance usability. - Data Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive record-keeping. - Output Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and reporting. - GLP-Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for traceability. - Compact Design: Features a built-in stand and wall-mount option, saving valuable lab space. Applications: - Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial applications. - Laboratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity measurements. - Aquaculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions. SpecificationsManufacturerJenwayModel3540ConditionUsedSerial Number01298Stock Number29042

Condition: new, functionality: fully functional, The V3 height measuring instrument has been engineered for the most demanding workshop environments. Manufactured entirely in Switzerland, it guarantees a robust, precise, and reliable product in the long term. For over 40 years, Trimos has pursued a philosophy of providing user-friendly instruments that are highly efficient on the shop floor. The display unit offers functions that are directly accessible and represented by easy-to-understand symbols. This enables straightforward and rapid operation, even by untrained personnel. The large two-line "Black Mask" display delivers exceptional contrast under all lighting conditions—a unique feature in the market. The V3 height gauge is the entry-level model among Trimos universal height measuring instruments. It fully benefits from technological developments incorporated in higher-end models. It is a rugged and easy-to-use device, equipped with all essential functions required for workshop use. Measuring ranges: 400 and 700 mm Extremely easy to use Electronically adjustable measuring force Battery autonomy: 40 hours (lithium-ion batteries) Standard probe up to 400 mm Comprehensive range of accessories All adjustments tool-free RS232 and USB interfaces V3 Model: V3-400 Measuring range (mm): 407 Application range (mm): 508 Accuracy (µm): 7 Repeatability (µm): 2 (Ø: 4) Deviation of frontal perpendicularity (µm): 10 Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 40 Interfaces: USB / RS232 Air cushion: No Weight (kg): 21 V3 Model: V3-700 Measuring range (mm): 711 Application range (mm): 812 Accuracy (µm): 7 Repeatability (µm): 2 (Ø: 4) Chsdow R Eacspfx Ahmjc Deviation of frontal perpendicularity (µm): 15 Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 40 Interfaces: USB / RS232 Air cushion: No Weight (kg): 24

Condition: new, functionality: fully functional, Discover ultimate precision with the Trimos V4 height gauge, meticulously manufactured in Switzerland to deliver long-lasting performance in demanding workshop environments. Our commitment to quality spans over 50 years, providing instruments that excel in user-friendliness and production efficiency. Thanks to complete Swiss manufacturing, the V4 guarantees robustness, precision, and enduring reliability—making it ideal for the most challenging shop floor conditions. The user-friendly display unit features easily accessible functions represented by universally understood symbols. Its large, dual-line ‘Black Mask’ display delivers outstanding contrast in any lighting conditions, setting it apart in the market. Building upon the success of the V3, the V4 height gauge extends capabilities with a second probe and an air cushion for effortless movement across the measuring table. The ergonomic handle is equipped with programmable function keys, enabling quick access to frequently used features and ensuring efficient operation for both skilled and untrained personnel. Explore the extensive range of accessories that enhance the adaptability of the Trimos V4 height gauge to your specific measurement requirements. Invest in precision, reliability, and efficiency—choose Trimos for an outstanding metrology experience. Measuring ranges: 400 and 700 mm Exceptionally easy to use Electronically adjustable measuring force Battery life: 20 hours (lithium-ion battery) Standard probe up to 400 mm Comprehensive range of accessories All settings adjustable without tools RS232 and USB interfaces Wireless data transmission (optional) V4 Models: V4 – 400 Measuring range (mm): 407 Application range (mm): 719 Accuracy (µm): 2.5 + L/250 Repeatability (µm): 2 (Ø: 3) Deviation of frontal squareness (µm): 9 Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 20 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 V4 Models: V4 – 700 Measuring range (mm): 711 Application range (mm): 1023 Accuracy (µm): 2.5 + L/250 Chsdjw R Ntgopfx Ahmoc Repeatability (µm): 2 (Ø: 3) Deviation of frontal squareness (µm): 13 Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 20 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24

Condition: new, functionality: fully functional, After the highly successful introduction of the V-Line height gauges, Trimos has developed a new instrument in its height gauge range: the V8. The mechanical design and scope of delivery of the V8 are identical to those of the V9. It features the same characteristics that have made the V9 model so successful: extreme precision and repeatability, high resolution, and Swiss Made finish. A particular highlight of this new model is the specialized fine adjustment handle. Trimos developed this fine adjustment in response to specific applications requiring precise adjustment of the carriage position. Like its predecessors, the V8 guarantees extremely simple operation with outstanding robustness, flexibility, and high precision. The large two-line "Black Mask" display of the V8 offers exceptional contrast in all lighting conditions. The display features functions that are directly accessible and represented by easy-to-understand symbols. Measuring ranges from 400 to 1100 mm Specialized fine adjustment handle Manual displacement Exceptional level of precision Wide selection of accessories All adjustments possible without tools RS232 and USB interfaces Wireless data transmission (optional) V8 Models: V8 – 400 Measuring range (mm): 406 Measuring range with extension (mm): 724 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 22 V8 Models: V8 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Deviation of front squareness (µm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 25 V8 Models: V8 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Cedpfx Ahsw R Nvhomjhc Deviation of front squareness (µm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 34

Condition: new, functionality: fully functional, The V5 height measuring instrument is the successor to the legendary V+ series, of which thousands of units have already been sold to workshops worldwide and which is renowned for its user-friendly operation and high quality. Trimos was the first company to launch vertical measuring devices over 50 years ago. The V5 series consolidates the know-how accumulated over these years. Its highly legible display and intuitive functions provide exceptional ease of use. But that's not all: the V5 is equipped with a revolutionary displacement handwheel that allows the user to choose between manual and motorized movement of the measuring slide. Both modes are uncompromising—users who prefer a manual instrument will notice no difference compared to a classic manual device, and the same applies to the motorized movement. This innovation eliminates the need for a tough purchasing decision and enables multiple potential users to operate the same instrument. The V5's design, featuring lateral probe holders, revives a long-standing Trimos tradition: they allow measurements with long, robust probes, ensuring excellent repeatability. Measuring ranges: 400, 700, and 1100 mm Extremely user-friendly Electronically adjustable measuring force Manual or motorized displacement Standard probes up to 400 mm Wide selection of accessories All settings adjustable without tools RS232 and USB interfaces Wireless data transmission (optional) Csdpfxjw R Nt Ts Ahmshc V5 Models: V5 – 400 Measuring range (mm): 407 Measuring range with extension (mm): 719 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Frontal squareness deviation (µm): 5 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 V5 Models: V5 – 700 Measuring range (mm): 711 Measuring range with extension (mm): 1023 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Frontal squareness deviation (µm): 8 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 V5 Models: V5 – 1100 Measuring range (mm): 1110 Measuring range with extension (mm): 1422 Accuracy (µm): 2.5 + L(mm)/400 Repeatability (µm): 2 Frontal squareness deviation (µm): 11 Resolution (mm): 0.0005 Measuring force (N): 0.75 ÷ 1.5 Battery life (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33

Condition: new, functionality: fully functional, The V6 height measuring instrument is the successor to the legendary V+ line, which has sold thousands of units to workshops worldwide and is well-known for its ease of use and high quality. Trimos was the first company to introduce vertical measuring devices to the market over 50 years ago. The V6 consolidates the extensive know-how acquired over the years. Its highly readable display and user-friendly features offer exceptional operating comfort. But that’s not all: the V6 is equipped with a revolutionary displacement handwheel, allowing the user to choose between manual or motorized movement of the measuring carriage. Each mode delivers uncompromised performance: users preferring manual operation will experience no difference compared to classic manual instruments, and the same applies to motor-driven movement. This innovation eliminates the need to make a difficult choice at purchase and allows several potential users to operate the same device efficiently. The V6’s design, with its lateral probe, revives a longstanding Trimos tradition: enabling measurements with long, robust probes that guarantee excellent repeatability. Measurement ranges: 400, 700, and 1100 mm Extremely easy to use Electronically adjustable measurement force Manual or motorized operation Standard probes up to 400 mm Comprehensive accessory range All adjustments possible without tools RS232 and USB interfaces Optional wireless data transmission Extended warranty V6 Models: V6 – 400 Measuring range (mm): 407 Extended measuring range (mm): 719 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 5 Resolution (mm): 0.0001 Measurement force (N): 0.75 ÷ 1.5 Operating autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 V6 Models: V6 – 700 Measuring range (mm): 711 Extended measuring range (mm): 1023 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 8 Resolution (mm): 0.0001 Cjdpfx Ahjw R Nuqjmjhc Measurement force (N): 0.75 ÷ 1.5 Operating autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 V6 Models: V6 – 1100 Measuring range (mm): 1110 Extended measuring range (mm): 1422 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 11 Resolution (mm): 0.0001 Measurement force (N): 0.75 ÷ 1.5 Operating autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33

Condition: new, functionality: fully functional, The Trimos V2 height gauge embodies Swiss precision, durability, and simplicity. Developed for professionals worldwide, it ensures accurate and straightforward measurement. Effortless Simplicity The user-friendly interface of the V2 provides quick access to essential measurements, ensuring efficiency and accuracy. Built for Durability Engineered to Swiss standards, it withstands tough conditions, making it a reliable tool for any task. Uncompromising Quality As a Trimos product, the V2 combines traditional craftsmanship with modern technology, guaranteeing outstanding performance. Intuitive and Intelligent Features The intuitive user interface streamlines navigation, while Smart Reverse simplifies diameter measurement with precision and ease. Seamless Connectivity USB and RS232 interfaces allow for easy data transfer. Warranty and Maintenance With a two-year warranty, extendable to four years, the V2 is designed for longevity and straightforward maintenance. Versatile Measuring Ranges Available in 400 mm and 700 mm versions for various applications. Reliable Support The dedicated Trimos team ensures you maximize the V2’s potential from the very start. The V2 is more than just a measuring instrument – it is a reliable partner that meets the highest professional standards. Chodpfew R D Tbjx Ahmsc Models: V2 – 400 Measuring range (mm): 406 Accuracy (µm): 8 Repeatability (µm): 3 (Ø: 5) Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 (electronically adjustable) Protection class: IP67 Interfaces: USB / RS232 Air cushion: No Max. manual adjustment speed (mm/s): 1000 Operating temperature (°C): +10 ÷ +40 Relative humidity: 5 ÷ 75% (non-condensing) Weight (kg): 21 Models: V2 – 700 Measuring range (mm): 710 Accuracy (µm): 8 Repeatability (µm): 3 (Ø: 5) Resolution (mm): 0.001 Measuring force (N): 0.75 ÷ 1.5 (electronically adjustable) Protection class: IP67 Interfaces: USB / RS232 Air cushion: No Max. manual adjustment speed (mm/s): 1000 Operating temperature (°C): +10 ÷ +40 Relative humidity: 5 ÷ 75% (non-condensing) Weight (kg): 24

Condition: new, functionality: fully functional, Models V7: V7 – 400 Measuring range (mm): 407 Measuring range with extension (mm): 719 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 22 Models V7: V7 – 700 Measuring range (mm): 711 Measuring range with extension (mm): 1023 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 25 Models V7: V7 – 1100 Measuring range (mm): 1110 Measuring range with extension (mm): 1422 Accuracy (µm): 2 + L(mm)/400 Repeatability (µm): 1 (Ø: 2) Csdsw R Nu Dopfx Ahmjhc Deviation of frontal squareness (µm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 34 Models V7: V7 – 1800 Measuring range (mm): 1810 Measuring range with extension (mm): 2122 Accuracy (µm): 2.5 + L(mm)/300 Repeatability (µm): 1 (Ø: 2) Deviation of frontal squareness (µm): 25 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Operating time (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 41