Used Rotating Center Point 3 Pieces for sale (76,096)

Condition: used, Year of construction: 2005, operating hours: 50,472 h, machine/vehicle number: 12332, Magnetic clamping plate approx. 1,200x600 mm, spindle speed: 8,000 rpm, travel paths X/Y/Z: 2 mm, control: HEIDENHAIN iTNC530, chip conveyor, operator terminal, coolant/lubricant belt filtration system, weight: 10,500 kg, without the hydraulic vise shown, without machining tools. Operating materials are included in the auction scope and must be taken or properly disposed of by the buyer. Bedpfoyztgysx Ad Aslg

Condition: used, Year of construction: 2015, machine/vehicle number: 152121150, Travel paths X/Y/Z axis approx. 750/500/500 mm, BT 40 spindle taper, power: 12 kW, equipped with SIEMENS control, Sinumerik 828D, integrated tool changer, integrated chip conveyor, T-slot clamping table approx. 80x45 cm Bsdpeyztdxsfx Ad Ajlg

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Bledpfolf E Aiex Ad Aog Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Travel Z : 508 mm Rapid traverse X/Y/Z: 28 m/min Table : 762 x 406 mm Table load : 1,500 kg

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Bjdpst Dizvsfx Ad Aslg Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: new, Year of construction: 2024, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 640, Work area Travel X: 1,250 mm Blsdpfx Adswptd Io Asg Travel Y: 950 mm Travel Z: 580 mm Clamping area (L x W): 1,360 x 960 mm Table load max.: 2,000 kg Spindle Technology: Direct drive Speed: 15,000 rpm Tool holder: HSK63-A General Tool changer: 30 positions Machine bed: High-strength Meehanite cast iron Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min Equipment Chip management: Scraper belt chip conveyor Chip flushing in the workspace Measuring system: Direct (linear scales) Coolant management: Internal coolant supply (ICS 30 bar) Parts and work area cleaning: Rinse and compressed air gun

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Bljdpfx Adeuu Rthe Aog Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, empty load weight: 6,500 kg, maximum load weight: 30,500 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space volume: 60 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2016, Equipment: ABS, 3 PIECES available 1 unit from year 2016 / 2 units from 2018 in stock Brand: FELDBINDER Type: KIP 60.3 Bledpfx Adjwvvzij Ajg Year of manufacture: 2016 Mileage: 331,736 km Unladen weight: 6,500 kg Payload: 30,500 kg Gross weight: 37,000 kg Technically permissible gross weight: 40,000 kg -- Silo for powders and free-flowing bulk goods -- Volume: 60 m³ / 60,000 liters -- Tipping silo -- Aluminum chassis -- Aluminum silo -- ABS -- Air suspension -- Lift axle -- Axles: BPW -- Disc brakes -- Aluminum rims -- Rear mechanical landing legs -- 5 x filling openings/manhole covers -- Operating pressure approx. 2 bar -- Working platform -- Hose box on left and right -- Hoses and additional accessories -- Storage/tool box -- Spare wheel holder -- Odometer -- Tires: 385/65 R22.5 Tread approx. 90% / 80% / 70% / 60% -- Clean silo interior -- Foldable bumper -- Complete documentation, data sheet, silo diagram, etc. -- etc. ... For more information: Mobile: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs formalities for you. What about your used equipment? ...if agreed, we are happy to take it in trade. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: used, empty load weight: 6,600 kg, maximum load weight: 30,400 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 06/2018, loading space volume: 60 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, Equipment: ABS, 3 UNITS available Bodpfx Ajyc Ii Djd Aelg 2 units from year 2018 / 1 unit from year 2016 available FELDBINDER - KIP 60.3 Brand: FELDBINDER Type: KIP 60.3 Year of manufacture: 2018 Mileage: 237,437 km Unladen weight: 6,600 kg Payload: 30,600 kg Gross weight: 37,000 kg Technical permissible total weight: 40,000 kg -- Silo for dust and free-flowing bulk materials -- Volume: 60 m³ / 60,000 liters -- Tipping silo -- Aluminium chassis -- Aluminium silo -- ABS -- Air suspension -- Lift axle -- Axles: BPW -- Disc brakes -- Aluminium rims -- Rear mechanical support legs -- 5 x filling openings/manlids -- Operating pressure approx. 2 bar -- Working platform -- Hose box left and right -- Hoses and additional accessories -- Storage/tool box -- Spare wheel holder -- Odometer -- Tyres: 385/65 R22.5 Profile approx. 90% / 80% / 70% / 60% -- Silo interior is clean -- Foldable bumper -- Complete documentation, data sheet, silo diagram, etc. -- etc. For more information: Mobile: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs formalities for you. Looking to sell your used vehicle? On agreement, we are happy to accept it as part of the deal. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: used, empty load weight: 6,600 kg, maximum load weight: 30,400 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 06/2018, loading space volume: 60 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, Equipment: ABS, 3 UNITS available 2 units from year 2018 / 1 unit from year 2016 in stock FELDBINDER - KIP 60.3 Brand: FELDBINDER Model: KIP 60.3 Year of manufacture: 2018 Mileage: 237,615 km Unladen weight: 6,600 kg Payload: 30,600 kg Gross weight: 37,000 kg Technically permissible total weight: 40,000 kg Bedpfxeyay S Eo Ad Aelg -- Silo for dust and free-flowing bulk materials -- Capacity: 60 m³ / 60,000 litres -- Tipping silo -- Aluminium chassis -- Aluminium silo -- ABS -- Air suspension -- Lift axle -- Axles: BPW -- Disc brakes -- Alloy wheels -- Rear mechanical support legs -- 5 x filling openings/manhole covers -- Working pressure approx. 2 bar -- Working platform -- Hose compartment on left and right -- Hoses and additional accessories -- Storage/toolbox -- Spare wheel holder -- Odometer -- Tyres: 385/65 R22.5 Tread approx. 90% / 80% / 70% / 60% -- Silo interior is clean -- Foldable bumper -- Complete documentation, spec sheet, silo sketch, etc. -- etc. For more information: Mobile: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the railway station in 4020 Linz. We handle all customs formalities for you. Where to go with your used equipment? ...if agreed, we will gladly accept it as trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 3 pieces -Tire size: 250/50-10 SC 10 RIM 6.50F -Rim: Mefro 41042 106 6.50F-10 ET 25 Blsdpjyx U Uysfx Ad Asg -Bolt circle: Ø 150 x 19 mm -Hub bore: Ø 110 mm -Delivery/Price: complete -Dimensions: Ø 450 x 210 mm -Weight: 35 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, solid rubber tires, solid rubber elastic bandage with rim, 3 pieces -Tire size: 85x370x500 double version Bedpfoyx U Nkjx Ad Aelg -Bolt circle: Ø 160 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 500 x 160 mm -Weight: 52 kg/pc.

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Bledpfxeyybpmj Ad Asg Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver Bljdpfx Aorv Avnod Asg -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Bodpfxoyywcvj Ad Aolg Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Blsdpfx Ajyyvttsd Aeg Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: good (used), Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, Solid rubber tires, solid rubber elastic bandage with steel band, 3 pieces -Tire size: Ø 410 mm -Inner diameter: 305 mm -Delivery/Price: complete -Dimensions: Ø 410 x 130 mm -Weight: 17 kg/pc. Blodpfjywh Eiox Ad Asg

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Bedpjyxn Awofx Ad Aslg

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Bljdeyufn Iepfx Ad Ajg Parts shown by hand not come.

Condition: used, axle configuration: 2 axles, first registration: 04/2021, loading space length: 7,900 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 11,890 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/55R22.5, tire condition: 70 %, color: white, Year of construction: 2021, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385/55R22.5 Tyre tread: 70% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Weights Unladen weight: 6,960 kg Payload: 23,040 kg Gross vehicle weight (GVW): 30,000 kg Functional Tail lift: DHOLLANDIA 2000KG Body manufacturer: Burgers Condition Damages: none = Company Information = Heisterkamp Used Trucks BV does not just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for operation. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: Bjdpex N Erkjfx Ad Ajlg - Email: - Website:

Condition: reconditioned (used), Year of construction: 1997, Model: B1050 Year: 1997 Weight: 5,000kg AXES: 3 (X, Y, Z) CNC: FAGOR 8050M Characteristic: Table dimensions: 1200x500mm Routes (X, Y, Z): 1000x500x510mm Maximum weight on table: 500kg Rapid advance on X-Y axis: 25,000mm/min. Rapid advance on Z axis: 20,000mm/min. Work advance: 5,000mm/min. Head: ISO 40 Bjdpfx Adjhy Rdms Ajlg Speed ​​range: 100-6,000rpm Maximum distance spindle to table: 650mm Automatic tool changer: 18 Selection type: Sequential Maximum tool diameter: 85mm (Between adjacent tools) Maximum tool diameter: 135mm (Between alternate tools) Maximum tool length: 250mm Maximum tool weight: 6kg Tool change time: 6 sec.

Condition: good (used), Attachment holders, standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 3 pieces -Recording: MK5 -Length: 345 mm -Dimensions: see photos Bjdpfx Adoucmqdo Aolg -Submission/Price: complete -Transport dimensions: 345/240/H40 mm -Weight: 9.9 kg

Year of construction: 2014, condition: excellent (used), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations, such as milling, drilling, and tapping, are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with tool spindle as an additional axis. Machining length (X-axis): 7200 mm Travel (Y-axis): Typically 485 mm (max. 60 m/min). Travel (Z-axis): Typically 340 mm (max. 60 m/min). Spindle speed: Standard 6000 rpm or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated 8-position turret or 4 angle heads, ensuring short tool changeover times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+STEEL machining: - tool holders, - reducer for steel machining, - special tools with chip breaker, Bsdpfx Aoyt H Uyed Aslg - dedicated programs for machining door profiles,

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Measuring range: 20 – 50 mm MACHINE DETAILS Dimensions & Weight Bodpfoynkkhex Ad Aelg Dimensions (L x W x H): 410 x 320 x 110 mm Weight: 10 kg External reference: Lot 48/ Feweta

Condition: good (used), Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm Bodjylhivepfx Ad Aolg -Weight: 3.3 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 30001492, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 45 m/min, controller manufacturer: HEIDENHAIN, controller model: ITNC530, HEDELIUS RS60 KM 2000 3/5-Axis Machining Center, Year 2006 Machine condition: In good condition Bljdpfxeylbvij Ad Asg Manufacturer: HEDELIUS Model: RS60 KM 2000 Year of manufacture: 2006 Tilting range: +10° / -90° Infinitely variable rotary table indexing: 0° to 360° Travel X-axis: 2,000 mm Travel Y-axis: 620 mm Travel Z-axis: 520 mm Travel X1-axis Rotary Swivel Table: 600 mm Travel Y-axis Rotary Swivel Table: 620 mm Travel Z-axis Rotary Swivel Table: 520 mm Travel X2-axis Window Machine Table: 775 mm Travel Y-axis Rotary Swivel Table: 620 mm Travel Z-axis Rotary Swivel Table: 520 mm Feed rate X-/Y-/Z- axis: 10 - 45,000 mm/min Rapid traverse X-/Y-/Z- axis: 45 m/min Distance spindle nose to table: 100 - 620 mm Max. workpiece weight - rotary-swivel table: 300 kg / window table: 1000 kg Rotary table interfering contour: ø 680 mm Clamping surface rotary-swivel table: ø 600 x 480 mm Clamping surface window machine table: 1200 x 600 mm Spindle speed: 50 to 12,000 rpm Tool holder: SK 40 (DIN 69871 / ISO 7388-1) Tool magazine: 56 tools Dimensions: 5.4 m x 4.3 m x 3.0 m Weight: 11 tons Power requirement: 21 kW