Used Scantool 3000 Slmt for sale (4,921)

Condition: new, Year of construction: 2026, Are you looking for a professional storage solution for industry, commerce, agriculture, PV systems, or emergency power supply? With the APS 2000 kWh - 4000 kWh battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data * Storage capacity: 3 MWh or 4 MWh per container * AC power: 1.5 MW or 2 MW * Lithium iron phosphate technology (LFP) * High-quality cell, cell module, and BMS technology based on CATL components * Integrated power electronics for industrial and utility applications * Liquid cooling system for continuous operation * Integrated protection and safety systems * Grid-parallel operation, island operation, and hybrid operation possible * Expandable to storage parks with several MWh, up to the double-digit MWh range Typical applications * Self-consumption optimization * Peak shaving * Electricity cost reduction * PV surplus storage * Grid stabilization * Load shifting * Curtailment reduction * Feed-in optimization * Black start capable energy systems * Emergency and backup power supply * Hybrid solutions with PV, BESS, and generators Optionally available * APS Energy Management System (EMS) * Grid-parallel operation * Island operation * Black start concepts * Integration of PV systems * Integration of diesel generators * Integration of CHP systems * Energy flow optimization * Remote monitoring and energy management * Multi-container systems with several MWh total capacity Your advantages ✓ High safety thanks to LFP cell technology ✓ High-quality CATL technology for cells, cell modules, and BMS ✓ Very high cycle life (≥ 8,000 cycles) ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Multi-level safety and fire protection concept ✓ Grid-parallel, island, and hybrid operation ✓ Scalable from a single container to a large storage park ✓ Individual project planning and commissioning ✓ Service and support Turn-key solutions from a single source Albari Power Systems supports you from the initial project idea to the final commissioning: * Project analysis and economic evaluation * Storage sizing Ljdpfjgu Ruksx Ammjac * EMS configuration * Grid and protection concepts * Engineering * Commissioning * Service and maintenance Designed in Germany The APS large storage containers are designed and engineered in Germany. Architecture, safety concepts, EMS logic, and integration strategies are developed according to European standards and industrial quality standards. We would be happy to create an individual concept for your project. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW Laedpfjzdy A Dox Ammsc with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, fuel: diesel, Equipment: additional headlights, airbag, differential lock, electric window regulation, trailer coupling, TLF 3000 All-Wheel Drive on Off-Road MAN TGM 13.320 All-Wheel Chassis Now with increased engine power! Ideally suited for small and medium-sized fire brigades in rural areas that require a compact and robust vehicle capable of handling a wide range of tasks while also needing a large water supply. Ljdjy Hqlkspfx Ammsac Chassis: MAN TGM 13.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission Single tires with same track width for superior off-road capability Cab: Standard crew cab (1:5) in RAL 3000 (fire red) Air conditioning and auxiliary heater Standard 4 SCBA mounts in the crew compartment Body: High-quality frame construction using rust and corrosion-free materials Folding steps at each side equipment compartment Individually customized stainless steel equipment storage Walkable, non-slip vehicle roof Pump/Extinguishing Media Tank: Maintenance-free combined normal/high pressure pump FPN 2000-10 PUMP&ROLL capable Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar Integrated, stepless foam proportioning system 4,000 l water tank with integrated 400 l foam agent tank Additional heating in pump compartment Firefighting Features: High-pressure rapid attack system with 50 m rigid hose Foam/water monitor (2,000 l/min) on the roof Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: LED lightbar on the roof / 2 LED front flashers Pneumatic Martin-horn special signaling system 100 W loudspeaker system with PA unit Rear-view camera Comprehensive LED lighting in crew and all equipment compartments LED area lighting and auxiliary white lights on the body Pneumatic LED light mast with remote control Optional hygiene board We would be pleased to provide you with a detailed offer and comprehensive demonstration of the vehicle at our Berlin location. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but serves as information only. Subject to prior sale!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Value of included equipment: 18,000–20,000 euros. * 4-axis machine. * Fully independent tailstock, programmable for Z-axis movement and clamping via M-codes. * 12-station turret, all stations motorized. * C-axis. * Y-axis. * Integrated main spindle motor: 18.5 / 22 kW. * Motorized tool motor: 5.5 kW. * Motor starting torque: 620 N·m. * Integrated motor with no belts or gear stages. * Main spindle size: A2-8. * Tailstock: MT5 Morse taper. * Bar capacity: 75 mm. Ljdpfx Amjzd Nt Ejmoac * Kitagawa B-210 spindle chuck. * Prismatic guides on all axes. * Spindle speed: 4,200 rpm. * Power tool speed: 4,000 rpm. * Turning diameter: 520 mm. * Machinable diameter: 380 mm. * Machinable length: 1,050 mm. * Oil cooler for the spindle. * Communication ports via USB, PCMCIA card, and RS-232. * Automatic control of tool torque and tension. * IGF OSP P200-L conversational automatic programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Tool life management and monitoring. * Rapid traverse speeds of 20 and 25 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw arm for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Automatic control of tool torque and voltages. * IGF OSP P200-L automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Tool life management and monitoring. * Rapid traverse speeds of 20 and 25 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw arm for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Dual foot pedal for opening and closing the main chuck and tailstock. * Side-mounted hinged chip conveyor. * Complete set of static tool holders for external and internal operations. * Complete set of axial and radial motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 6,200 kg. * Machine is currently in operation. * Immediate delivery, unless sold immediately.

Year of construction: 2026, condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Ease up your production with a Wattsan CW cleaning machine, continuous and with water-cooling. It can remove rust, paintwork, oil products, oxide coatings, welding scales, and carbon deposits from a variety of metals. This model features 1 type of cleaning seam. There are no consumables and no need for a significant amount of necessary space. Compact, portable laser cleaner that can work at any angle and in the most inaccessible places. The chiller is also built-in. The fiber length is 8 meters. The laser gun is lightweight and comfortable for long-term use. You can give our managers a call for additional details! Wattsan CW Cleaning machine characteristics: Cooling: water Laser power: 1000-3000 W Machine size: 880*560*1010 mm Laser source: JPT / Raycus Weight: 145 kg Lajdsiicgkspfx Ammec Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2026, total length: 800 mm, total width: 3,000 mm, total height: 850 mm, Work table AT 3000 with stainless steel top & containers Stainless steel work table AT 3000 with stainless steel work surface and rear shelf Laedpfx Amozfxxmsmsc 12 containers, each with a capacity of 25 kg Drawer unit on the right Dimensions: 3000 x 800 x 850 mm (W x D x H) Used equipment Visit us!

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 6015400, functionality: fully functional, filter area: 340 m², empty load weight: 3,043 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of filter bags: 200 pcs. Filter length: 2,600 mm Filter diameter: 200 mm Filter area: 340 m² Laedpfx Amozdz Unomoc MACHINE DETAILS Connection diameter: 750 mm Power of the main fan: 45 kW Weight: 3,043 kg Transport packages: 2 pcs. EQUIPMENT CE marking Control cabinet Number of connections: 1 pc. Main fan: 1 pc.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Equipment, detailed description: see documents. Lodpjzd Srdsfx Ammsac

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 3000 M1.2.52, input voltage: 415 V, 1 x Thompson 3000 Mixer grinder. Production rate 3000 KG per hour on primary cut. Lodpozcmh Sofx Ammeac Fully stainless steel construction.

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Laodpfx Amexnlavomsc

Condition: excellent (used), Year of construction: 1999, mileage: 123,456 km, total length: 5,900 mm, total width: 2,450 mm, total height: 2,160 mm, Water treatment system, 3000 liters Air conditioning system Auxiliary heater Deutz engine 20 kW diesel engine Generator 5.90 x 2.45 x 2.16 m Only 100 operating hours Like new! = Further information = Lajdpfx Amjzdryhsmec Year of manufacture: 1999 Model year: 1999 Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Lasdpfx Aezdq Ecommoc Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Height: 2350mm Weight: 14450kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM3 Technical data: Measuring volume: 3000 mm Accuracy: 0.045 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness not guaranteed) ● With transport case Dimensions & weights: ● Setup dimensions (L x W x H approx.): 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional information: ► Transport to the destination can be offered upon request ► The quoted price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale Lodpfx Amoy Sawtsmjac ❗The sale of the goods is strictly to commercial customers only❗

Condition: excellent (used), RMS Vibrations Vibration Testing System Here we offer you an RMS electrodynamic vibration testing system. RMS Vibrations Vibration Testing System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Untested! Tests were not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Laodpfx Aozdtc Dsmmec We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: ready for operation (used), Year of construction: 2010, A Mimaki UV printer including a Kühnast UV conveyor dryer is available. 1) Mimaki UJF-3042 UV LED flatbed printer, year of manufacture: 2010, print dimensions X/Y: 300mm/420mm, max. material height: 50mm, max. print resolution X/Y: 1440dpi/1200dpi, machine dimensions X/Y/Z: approx. 1200mm/1000mm/800mm, weight: approx. 120kg. 2) Kühnast 3000 UV conveyor dryer, year of manufacture: 1998. Both machines must be inspected. An on-site inspection is possible. Lajdpfx Amezfp H Uomoc

Condition: excellent (used), Here we offer you a conveyor spray processing machine from Mega Electronics. Mega Electronics conveyor spray processing machines Conveyor spray processing machine FAPC 3000 The new FAPC models were developed to work with the latest development, etching, and stripping chemistries for the production of printed circuit boards, metal signs, and chemically milled metal components. The FAPC 3000 can accommodate panels with a width of up to 300 mm. Process chamber 450 mm Lasdpjzdqbwjfx Ammsc Water rinsing chamber 280 mm Spray bars – Top 4 process chamber, 1 rinsing chamber Spray bars – Bottom 4 process chamber, 1 rinsing chamber Nozzle type: Poly v-jet – removable with ¼ turn Nozzles per tube: 3 + 4 for process, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control: Adjustable over the entire range from top and bottom. Conveyor speed control: High torque. AC drive motor system, powered by a precision inverter with digital displays for precise operator reference. Speed range: 45 mm - 1.6 m / min Temperature range: Ambient temperature to 50°C ±1°C Temperature controller: Digital Liquid level sensors: For heating and pump Manual reset of the over-temperature protection Voltage: 220 / 240V 50Hz (13A plug) Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Including drip tray Type: FAPC 3000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Ljdpfxszdnnuo Ammoac Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 2950 mm swing diameter 3200 mm turning height 3500 mm table load 20 t feed range 3000 mm/min main drive motor 70 kW milling drive 16,1 kW Additional information * CNC-control FAGOR 8070 * C-axis with 360,000 positions * Milling head Laedpezdrc Ajfx Ammjc Inspection under power in the factory possible. Machine location is Spain.

Condition: used, Year of construction: 2013, functionality: fully functional, cutting height (max.): 310 mm, cutting width (max.): 520 mm, Equipment: CE marking, documentation/manual, Behringer HBP 310-523 GA NA 300 PC, manufactured in 2013, with extensive equipment: PHOTOS will follow! - Powered infeed conveyor with cross transport - 3000 mm feed gripper with single-stroke, rotating movement - Double miter saw Lajdpjzdq Hmefx Ammsc - Powered outfeed conveyor with hydraulically pivoting bridge - Pusher on fixed supports - General technical data in the appendix This CNC-controlled sawing system is ideally suited for steel trading, mechanical engineering, and metal construction. Lengths, miter cuts on both sides, and material removal – all automatic.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, ● Condition: Not tested ● Location: 47906 Kempen ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal no.: ZM2 Technical data: Measuring volume: 3000 mm Accuracy: 0.07 mm Scope of delivery: ● With laptop and software as shown in the pictures (completeness without guarantee) ● With transport case Dimensions & weights: ● Installation dimensions (L x W x H) approx.: 1000 x 500 x 1000 mm ● Weight approx.: 30 kg Additional notes: ►We can arrange transport to the destination upon request ►The quoted price is net plus VAT Laodpfx Ajy Sav Nemmsc ►The goods are sold without any warranty ►Technical data subject to change and without guarantee ►Subject to prior sale ❗Sale is exclusively to business customers❗

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker Lodpfx Aezdnx Hsmmeac design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Lajdey Sfx Nspfx Ammoc Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: new, driver cabin: other, gearing type: other, Other: Lajdezfitnspfx Ammsc * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE Ledpfxozd Siis Ammoac 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: good (used), 75 linear meters of used Schäfer R3000 shelving system 📋 Consisting of: • 60 x pre-assembled frames / approx. 250cm high / 60cm deep / new • 236 x shelves / 122cm long (special size) / 60cm deep / 150 kg load capacity / used • 19 x cross braces Lsdpfsccxuisx Ammsac • Color: galvanized, gray • Condition: very good, see photos 💰 Price: €4,980.00 net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and pickup: possible at any time by appointment • Product number: P2664 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.)