Used Segem Ert 100 for sale (27,467)

Condition: used, Year of construction: 2004, sheet width 1000 mm Dksdpsyi Hpcsfx Ad Nel plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Condition: used, maximum load weight: 2,506 kg, overall weight: 3,500 kg, first registration: 01/2022, total width: 2,370 mm, total height: 1,865 mm, Errors and prior sale excepted! Internal number: A69. The vehicle is unprepared! Nationwide delivery available at an additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing also possible with no down payment! Do you have any questions? We are happy to advise you! Dkedpfx Aoy Aikded Nel

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V Djdpfxoyug Hxs Ad Nekl • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: GD12002, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding diameter: 360 mm, overall weight: 4,700 kg, TECHNICAL DETAILS Max. grinding diameter: 360 mm Max. grinding length: 1,000 mm Max. workpiece weight: 150 kg MACHINE DETAILS Main drive power: 5 kW Dimensions & Weight Dimensions (L x W x H): 3,030 x 2,250 x 2,030 mm Weight: 4,700 kg EQUIPMENT PLC controlled Tailstock Work spindle Dkodpfx Adsy A Nl Uj Nsl Grinding spindle with flange and grinding wheel Internal grinding device Wet grinding system Electronic handwheel Work lamp Center point Chuck Manual

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Djdexxvqajpfx Ad Njkl

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new Dkjdpfogkgwfsx Ad Nsl One owner from new Low hours in good working condition

Year of construction: 2018, condition: like new (used), functionality: fully functional, A new system for treating wastewater or condensate. Stored in 2018 and unused. Can be connected and tested if necessary. Dksdpfowhlr Isx Ad Nsl

Condition: excellent (used), Automatic pallet wrapper Film pre-stretch Inventory no. 3839 Dodpfx Adsyu U Rxo Nokl Manufacturer: Certis Model: Tablo 1000 * Year of manufacture: 2011 * Turntable positioning via Fix-Stop * Number of bottom and top wrap cycles * Turntable diameter: 1,650 mm * Maximum wrapping height approx. 2,150 mm * Net weight approx. 310 kg * Suitable for Euro pallets and block pallets!!! * Very good condition

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 19,000 kg, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap Dedpfjy Atc Rjx Ad Nekl – Automatic lubrication system

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm Djdpfsywhamjx Ad Njkl fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Dodoytirnepfx Ad Nskl Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dkodsx D It Rjpfx Ad Nsl Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 1997, open-circuit voltage 280 - 320 VDC current intensivity 30 - 80 A output voltage 140 VDC cutting medium Air / Nitrogen total power requirement ca. 11,2 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,90 x 0,35 x 0,50 m Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 ERTHERM RT 80 hand torch - Recommended cutting capacity: 22 mm Dodjym D Anjpfx Ad Nskl - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Dedpfx Adeynwx Sj Njkl Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. Djdpfx Adoynwxxs Nekl A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: new, empty load weight: 1,067 kg, maximum load weight: 2,433 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,970 mm, loading space width: 2,030 mm, loading space height: 2,060 mm, loading space volume: 21 m³, color: black, construction height: 2,370 mm, working width: 2,350 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, stand rail extension by 11cm / electric winch inside, * IMMEDIATELY AVAILABLE * incl. Stand rail extension by 11cm / electric winch inside Technical data: - Make: Debon - Model: Roadster C1000 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 497 x 203 x 206 cm - External dimensions (L x W x H): 625 x 235 x 237 cm - Loading height of floor: 35 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,067 kg - Payload: 2,433 kg - Chassis: Low loader (wheels next to the body) - Tires: 195/50R13C - Chassis: Pullman2 coil spring - Support wheel: Yes, automatic - 100km/h approval: Yes EQUIPMENT - Brakes: Yes - Number of axles: 2 - Floor: Aluminum floor - Walls material: Composite (honeycomb core) - Roof material: Full polyester - Through-loading height: 205 cm - Through-loading width: 190 cm - Colour: Black - Number of pallet spaces: 10 - Tipping / lowering function: None - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: Plastic mudguards - Side door: Yes - Side flap: Yes - Rear doors / tailgate: Tailgate - Rear door / tailgate material: Aluminium - Locks box body: Angle lever locks - Drive-on angle: approx. 10 - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: 8 - Interior light: Yes, rear - Rear lighting: Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear top position lights - Plug for lighting: 13-pin - Vehicle documents: COC documents Standard equipment: - Double-walled and anodized aluminium drop sides - Anodized aluminium floor - Full poly roof and front in color - Interior continuous height: approx. 200cm - Continuous width inside: approx. 191cm - Drive-on flap made of aluminum with optional lock lockable, (reinforcement of the tailgate by T-beam) - Side flap, lockable, on each side, opening dimensions: 2380 x 1330 mm W.H., quick access to your vehicle and optimum presentation option - side door on each side, lockable - width in the interior between the mudguards 1910 mm - height of the side wall (cannot be opened) measured from the floor: 290 mm - height of the side wall (cannot be opened) measured from the stand rails: 180 mm - running rails inside the box trailer - left and right, with perforated grid - length of the stand rails: 4030 mm - height of the stand rails measured from the floor: 110 mm - incl. electric cable winch Electric cable winch - Incl. hand-held remote control with cable - Incl. 12V battery on the loading area - lashing eyes mounted on the floor - interior lights - torsion-resistant chassis - stable cross members for high point loading - PULLMAN V2 chassis independent suspension with trailing arm, coil spring and shock absorber, lowered with very low centre of gravity and galvanized - 100 km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing lights - large rear lights - rear view mirror - rear view mirror - large rear view mirror - rear view mirror - rear view mirror. plug - reversing lights - large safety lights - integrated rear fog light - automatic center support wheel New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, De Dksdpou Htn Tjfx Ad Nol

Condition: used, Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. Dkodpfx Adjvr Ncyo Njl for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Lippert belt conveyor GF 1000-700-600 RA2251 Technical data: Conveyor length (NL): 1000 mm Frame width (NB): approx. 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0.55 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Dksdpfx Aderrxcne Nsl Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, machine/vehicle number: RPM 1000 D, Used robots - polishing machines P 1000 D Type: P1000 Right-hand version Polishing discs Ø 1000 mm Dsdpfx Adexludxj Nskl

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Dkedpfx Adew Emyzo Nsl

Condition: used, Year of construction: 2008, SOMERTEKNO - KLIPKLASIK 1000 - 2008 - SOMERTEKNO finnish rolling line - see profile on photos - width 1000 mm Dsdpfoymg Utjx Ad Nekl - no length limitation - rusty rolls can be cleaned - can be tested under power - decoiler not in price, this costs extra

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Type: K Included in delivery: 1x pallet rack upright, used Material color: Sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, Dksdpfjv I Tcpjx Ad Nsl base plates The uprights are pre-assembled (screwed framework) Frame height: 2,000 mm Frame depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Djdpfx Adewd Srms Njkl Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Winkworth Jacketed Stainless Steel Mixer Tank Dksdpfxjwq Sw No Ad Nol Capacity 1000 LTS Jacketed Stainless Steel With ancillary equipment

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Jacketed Stainless Steel Year 2012 With ancillary equipment Dsdjwq Slajpfx Ad Njkl