Used Skoda Plate Drilling Machine for sale (71,980)

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Ijdpfx Aszcnnascgoau Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm Iasdjzdb H Sjpfx Acgsu -Speed range - stepless 60 - 1800 rpm -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 891149, 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Iajdezcg Ifjpfx Acgeu Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm

Condition: excellent (used), machine/vehicle number: M100037, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 45 mm, spindle mount: MK 4, drilling depth: 250 mm, height adjustment type: mechanical, actuation type: mechanical, rotational speed (max.): 2,650 rpm, rotational speed (min.): 30 rpm, total width: 900 mm, total length: 1,900 mm, total height: 2,200 mm, table width: 760 mm, table length: 1,120 mm, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: CE marking, CARIMATI CTU 40/45 x 1000 radial drill press in excellent overall condition, fully functional machine, tested and ready for use. Key features: drilling capacity 45 mm Morse taper MK4 spindle speed 30 – 2650 rpm automatic feeds 0.05 – 0.3 mm/rev spindle stroke 250 mm Isdpfx Acjzdqklsgeau table stroke on column 1000 mm power supply 400V three-phase complete with chuck, vise, and quick-change chuck column and head locking coolant system machine complies with CE standards Transportation is the responsibility of the buyer. Loading onto the truck will be carried out by us. If customized/tailor-made packaging is required for transport, the related cost will be borne by the buyer. Machine sold as is, with no warranty.

Condition: excellent (used), functionality: fully functional, Models BM5139 Hang 107-30 electronic professional - 4-Head Iajdpetuwa Iofx Acgeu BM5138 Urbaniak - 2-Head BM5105 Hang Piccolo eye letting machine BM5137 Hang Cito Borma 54S - 1-Head BM4822 Hang 136D - 2-Head BM4434 Hang 106-T25 - 1-Head BM3196 Hang 106DT20 2-Head Further details on request

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Iajdpfxjyl Idao Acgou Grinding attachment and cross table for grinding countersinks

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm Iaedpfsmnntmex Acgsu - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Iaodotzctmepfx Acgou Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment Ijdpfezcpu Uex Acgeau • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. 5 drilling machines in stock, sold individually. Ijdszb El Hepfx Acgeau

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Colour: Grey Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 Iodpex Ad R Nofx Acgjau - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: defective spare-parts repository (used), Year of construction: 1971, machine/vehicle number: 9604, functionality: not functional, tool diameter: 50 mm, spindle mount: MK 5, rotational speed (max.): 1,700 rpm, total width: 1,100 mm, total length: 2,600 mm, total height: 3,500 mm, overall weight: 4,000 kg, Function: Turret hub defective (does not move up or down) Drilling capacity (steel): 50mm Speed: 1700 rpm Overhang: 45mm - 1500mm Workpiece height range: 470mm - 1500mm Sleeve travel: 680mm, quill travel: 350mm Spindle mount: MK5 Max. tool weight: approx. 30kg Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm Weight: approx. 4000kg Iajdpfxozcqcme Acgou An on-site inspection is possible.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Parameters for the advertisement Manufacturer: MG Model / capacity: MG 2000 × 25/20 mm Year of manufacture: 1998 Type of machine: hydraulic 4-roll sheet metal bending machine Number of rolls: 4 Working length of rolls: 2,000 mm Max. sheet metal thickness: approx. 25/20 mm depending on the material and bending method Pre-bending: yes, thanks to the 4-roll design Iedpfxozd Evpe Acgoau Drive: hydraulic Control: separate control panel Application: bending sheet metal, manufacturing of casings, tubes, cones, and welded structures Condition: excellent Inspection possible: by arrangement

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Iaodpfx Acszdqttegou Total number of drilling spindles: 24 Total number of tool changer positions: 16

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation Iedpfx Aexn Rrqjcgoau - Brake motor - Emergency stop - Documentation - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 10 h, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, roller diameter: 130 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 1,500 kg, total length: 3,200 mm, total width: 750 mm, total height: 1,000 mm, power: 2.2 kW (2.99 HP), Equipment: cone bending device, foot remote control, swiveling upper roller, For sale is a high-quality 3-roller sheet metal rolling machine, Sahinler IRM 2050 x 130, with an electric drive. The machine was only purchased for one project and has approximately 10 operating hours. Technically and visually, it is in almost new condition. Particularly practical: The machine is equipped with heavy-duty rollers, making it mobile and allowing for flexible movement within the workshop. Technical data: Manufacturer: Sahinler Type: IRM 2050 x 130 Year of manufacture: 2022 Operating hours: approx. 10 h Usable sheet metal length: 2,050 mm Maximum sheet metal thickness: 3 mm Roller diameter: 130 mm Drive power: 2.2 kW Iaodpfx Acjzdnfmsgsu Weight: approx. 1,500 kg Dimensions (L x W x H): 3,200 x 750 x 1,000 mm Equipment: 3-roller design Asymmetrical roller arrangement with pre-bending function 2 driven rollers with brake motor Swiveling top roller forward Forward and reverse operation Conical rounding by tilting the rear roller Mobile control panel Mobile thanks to retrofitted heavy-duty rollers The machine is ready for immediate use and can be inspected by arrangement. If you are interested or have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2004, bore capacity in steel (diameter) 50 mm arm length 1.600 mm workpiece height max. 1.200 mm distance spindle/base plate 320 - 1.220 mm spindle taper MT 5 quill stroke 315 mm throat min. 350 mm throat max. 1.600 mm quill feed 0,04 - 3,20 mm/U drive capacity - spindle motor 4,0 kW spindle turning speed range 25 - 2.000 U/min column diameter 350 mm voltage 400 V total power requirement 6,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 Isdpfx Ajzcqyfscgjau - Clamping cube 630 x 500 x 500 mm - Coolant pump

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. Iaedpfozdb Nmex Acgou An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: used, table width: 695 mm, table length: 1,200 mm, BOHNER & KÖHLE Knee-Type Milling Machine / Router, used, equipped with: rotary table, clamping surface approx. 1,200 x 695 mm, milling spindle with 1.5 HP, speed range: 700, 1,400 and 2,800 rpm. The bevel gear, which can be seen in picture no. 5, is not included in the scope of delivery! Ijdpfezdrn Sex Acgsau Technical specifications: weight approx. 3000 kg dimensions (l x w x h) approx. 2400 x 2300 x 2750 mm.

Condition: used, drilling capacity: 23 mm, Equipment: type plate available, Fast radial drilling machine – bench drilling machine Donau Werkzeugmaschinen DR23 radial drilling machine Serial number 2062-4 Operating voltage 380 volts with neutral conductor, 50 Hz, 3-phase Drilling capacity: up to approx. Ø 50 mm Speed range 58 - 1275 rpm Threading device, overhang 920 mm Machine light Base plate, table size approx. 1100x400 mm Motor power approx. 1.5 kW, without coolant system 2 T-slots at the rear left Weight: approx. 1,200 kg The arm is pivotable, height-adjustable, and can be moved in length and depth. Iaedpfx Ajwybqqecgju At the push of a button, the desired position can be achieved by pivoting, pulling, and pushing, and then fixed in place. An inspection while the machine is powered on is possible after prior appointment. All technical specifications are subject to printing errors and omissions. Price on request Sale exclusively to countries within the EU.

Condition: good (used), Year of construction: 2007, machine/vehicle number: 400.079, Offer 26144 Technical data: - Drilling capacity in steel ST 60: 40 mm Ijdozcn Itopfx Acgeau - Drilling capacity up to: 45 mm - Tapping capacity up to: M 36 - Feed rates continuously adjustable - Drill spindle mounting: MK 4 - Drill spindle stroke programmable up to: 175 mm - Drill spindle speeds continuously adjustable: 30 - 2400 rpm - Overhang: 300 mm - Table with 2 T-slots: 600 x 500 mm - Height adjustable via rack and pinion with hand crank - Min. - max. distance table – drill spindle: 70 - 830 mm - Drive: 400 V / 7.5 kW - Space requirement approx.: W 600 x H 1980 x D 950 mm - Weight approx.: 500 kg

Condition: used, Display unit Condition: Like new Iaedpfoyamc Dox Acgju Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Iasdpfxew Rhk Rs Acgsu Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit Iedpfxsv Ntb Is Acgeau This item is an unused display unit.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety: Light barrier Control and software Iaedpsw Npyqjfx Acgeu SCM XILOG Minimum footprint: 3920x1170x2150