Used Spirax Sarco Phs Easiheat for sale (456)

Condition: used, Year of construction: 2023, Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: CNC - Press force [ton]: 240 - Max. working width [mm]: 4100 - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Tools included: Yes Hsdszcmrkspfx Aqgsfn - Control type: Delem DA-69T Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Hfedpfx Aqez Nyp Hsgsn Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Hfedpfjz Elvvex Aqgen Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones Hfedoz Eqdxspfx Aqgjn - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Counter Spindle No Driven Tools Yes Hodpfx Aqez Hb Nhegjfn

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, total height: 2,150 mm, total width: 1,450 mm, table width: 230 mm, table length: 1,244 mm, table load: 230 kg, overall weight: 950 kg, spindle speed (max.): 5,100 rpm, product length (max.): 1,400 mm, number of axes: 3, This 3-axis Optimum OPTImill MF 2V was manufactured in 2017. It features a maximum vertical spindle speed of 5100 rpm and a cutter head size of 76 mm. The machine includes a horizontal milling table with a length of 1244 mm and a maximum load capacity of 230 kg. If you are looking to get high-quality milling capabilities, consider the Optimum OPTImill MF 2V drilling and milling machine we have for sale. Contact us for further details. - Type: Manual multifunctional 3-axis drilling and milling machine- Digital Readout: DPA 21- Modifications / Upgrades: Drive Upgrade- Total Connected Load: Approx. 1.5 kW (may be higher due to modifications)- Electrical Voltage: 400 V- Phases: 3 Ph- Current Type: ~- Mains Frequency: 50 Hz- Cutter Head Size Max.: 76 mm- End Mill Size Max.: 18 mm- Vertical Spindle Throat/Reach: 233 - 533 mm- Vertical Spindle Tool Holder: ISO 40 DIN 2080- Vertical Spindle Speed Range: 10 - 5100 rpm- Vertical Spindle Number of Speed Ranges: 6- Vertical Spindle Speed Control: Electronically adjustable- Horizontal Milling Table Length: 1244 mm- Horizontal Milling Table Width: 230 mm- Distance Vertical Spindle to Horizontal Table Min.: 57 mm- Distance Vertical Spindle to Horizontal Table Max.: 463 mm- Horizontal Table T-Slot Size: 16 mm- Horizontal Table T-Slot Number: 3- Horizontal Table T-Slot Distance: 63 mm- Horizontal Table Max. Load Capacity: 230 kg- Number of Coolant Pumps: 800 mm automatic- Vertical Spindle Continuous Duty S1 Drive Motor Power: 1.5 kW- X-Axis Travel Automatic: 24 mm- Y-Axis Travel Automatic: 20 mm- Spindle Speeds: Stepless speed control- Drilling/Milling Head Inclination: Tiltable ± 45°- Reach / Throat: 215 - 533 mm MF 2Vario DPA- Drilling Depth Stop: Adjustable with millimeter scale, readable from the front- Protective Shield: Height-adjustable, large dimensions- X-Axis: Motorized table feed, stepless speed control, rapid traverse, right/left rotation, cross table Hfsdpfx Aqjzq A A Hegsn

Condition: good (used), Year of construction: 2021, overall weight: 770 kg, We are offering this well-maintained Holms PH/300-3 hydraulic sweeper brush, with a large BM connection (suitable for, among others, Volvo L120), manufactured in 2021. Manufacturer: Holms Hfsdpfez Rnaijx Aqgen Model: PH/300-3 Year of manufacture: 2021 Condition: good Category ID: 287 Type ID: 3445 Type: Hydraulic sweeper brush If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2016, X-axis: 1,200 mm Y-axis: 2,000 mm Z-axis: 1,000 mm Weight: 8 tons Maximum workpiece weight: 2,750 kg Probe head: PH 10 M Includes documentation. Hjdpfxoz Rnckj Aqgofn

Condition: used, Climats Type: EXCAL 1413-HA Air-cooled climate chamber EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports. This makes it state-of-the-art. Technical data: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Window 350 x 380 Volume: 138 liters Standard feedthrough installed R1: 80 mm Ø L1: 80 mm Ø Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity spatially: ± 0.5 to ± 1.8 K Temperature change rate Heating: 15 K/min Cooling: 10 K/min Data for climate tests: Temperature range: +10 to +90 °C Humidity range: 10 to 98 % RH Operating data: 3/N/Ph+T 400V ±10% 50 Hz Rated power: 9.8 KVA Refrigerant: R-404A / R-23 Weight: 430 kg For your safety as a buyer, please note the following information: Hfsdjzh D Rtjpfx Aqgjn The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2012, Vemag Portioner Machine Model MMP220 Year 2012 400-460 V, 3 Ph, 50/60 Hz, 3.5 A, 1.5 kW, 6 bar, weight: 335 kg Working width: 260 mm, plastic belts, belt width: (2x) 250 mm Hfsdpsym Uc Sefx Aqgsn Dimensions: 1760 mm x 600 mm x 1550 mm In excellent condition

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Hfsdpfx Aqow Dcdyogjn Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Year of construction: 2023, condition: excellent (used), Industrial Plankton PBR 1250L – Turnkey Photobioreactor for Microalgae Cultivation Complete, ready-to-run closed photobioreactor for cultivating microalgae (e.g. Nannochloropsis, Spirulina, Chlorella, Isochrysis, Tetraselmis, Haematococcus and more). Manufactured by Industrial Plankton Inc. (Canada). In service since spring 2023, well-maintained and fully operational. Offered as a complete turnkey package. Built around a custom 1250 L high-surface-area vessel (1200 L working volume) with algal-spectrum LED lighting and a touchscreen PLC that automates light, pH, CO2, temperature, nutrient dosing and harvesting – with remote access. Highlights: Easy to run and keep clean: touchscreen automation + integrated clean-in-place (CIP), no manual scrubbing Compact footprint: full 1250 L capacity in a compact vertical unit (working area approx. 3.05 x 2.44 m) Strong, controllable growth performance for high-density cultivation Continuous production approx. 200-500 L/day; 100-300 g biomass/day (AFDW) at 0.3-1.2 g/L Broad strain range (freshwater & marine) Key specifications: Total / working volume: 1250 L / 1200 L LED lighting: algal-spectrum, 2160 W Control: touchscreen HMI + PLC, real-time density sensor, remote access pH / CO2: probe & transmitter, automated CO2 dosing valve & regulator Temperature: heat exchanger, 5000 BTU chiller, 300 W heater Nutrient dosing: 3 pumps (1 mL/s), 2 filters (0.2 um) Flow/harvest: 0.1 um water filter, in-tank volume sensor, harvest pump (6 L/min) Hjdpfx Aqjzluy Hegofn Header tank: 250 L with UV filter, ultrafilter & supply pump Power: approx. 3160 W avg / 4170 W max; 110-120 / 220-240 V, 50/60 Hz Operational weight: approx. 2130 kg Condition: good working order, well-maintained. CO2 cylinder not included. Exact scope confirmed on inspection. Location: Lahti, Finland (EU). Inspection and live demonstration by appointment. As part of the sale we are happy to advise the new owner on the best starting species and share reference data to get running. Full illustrated PDF spec sheet available on request.

Condition: like new (used), Year of construction: 2006, functionality: fully functional, For sale: lot of 3 Dosatronic LDHP pH controllers for chemical dosing systems. Manufacturer: Dosatronic Model / type: LDHP pH Controller Quantity: 3 pcs Application: pH control / chemical dosing systems Condition: unused old stock / New Old Stock Age: approx. 20 years in storage Functionality: not tested Accessories: no probes, no hoses, no pumps, no mounting accessories included Sale: preferably as complete lot The controllers come from unused warehouse stock. According to our information, they have never been installed or used. Due to the long storage period, they are sold as untested old stock. Hodpfx Aoyw Riqeqgsfn Suitable for: chemical dosing systems water treatment swimming pool technology pH regulation industrial process control food and chemical industry spare parts stock or resale Important note: This offer includes controllers only. pH electrodes, dosing pumps, hoses, valves and installation accessories are not included. Sold as shown in the photos. Location: Slovakia, EU Zum Verkauf stehen 3 pH-Controller für Dosieranlagen des Herstellers Dosatronic. – geeignet für pH-Regelung und chemische Dosiersysteme – industrielle Ausführung – unbenutzt (Lagerware / New Old Stock) Die Geräte stammen aus einem industriellen Lagerbestand und wurden nie installiert. Geeignet für: – Wasseraufbereitung – Schwimmbadtechnik – Chemische Industrie – Lebensmittelproduktion Zustand: Unbenutzt, jedoch länger gelagert. Funktionsprüfung nicht durchgeführt. Verkauf einzeln oder als Komplettpaket möglich.

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Hsdpfezil Suex Aqgefn Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G Hfjdpfxozuzw De Aqgjn AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, METTLER TOLEDO Titration System / Laboratory Titrator METTLER TOLEDO Titration Excellence T90 Automatic titration system with touchscreen terminal and dosing units For sale is a used titration system from the manufacturer METTLER TOLEDO. The system is suitable for demanding laboratory applications, automatic titrations, pH/ISE measurements, quality assurance, and chemical analysis processes. Technical Data Manufacturer: METTLER TOLEDO Type: Titration Excellence T90 Device type: Automatic laboratory titrator / Titration system Model series: Excellence Titrators T50 / T70 / T90 Touchscreen terminal One Click® Titration Modular system Ethernet connection USB interfaces CAN-Bus system Plug & Play sensor and burette recognition According to the manufacturer's specifications for T90: Hfjdpfszc Ic Dsx Aqgen Up to 7 additional burette drives Parallel titrations possible Up to 30 tasks Up to 8 parallel tasks Sequence sequences If-Then conditions in methods Results buffer Applications according to the manufacturer's specifications: Acid/base titrations Precipitation titrations Redox titrations Complexometric titrations Photometric titrations Conductivity titrations pH stat pH, ion-selective and conductivity measurements Karl-Fischer titrations Equipment METTLER TOLEDO T90 main unit Touchscreen control terminal Several dosing units / burette drives Titration arm / electrode holder pH/ISE connections Sensor connections Ethernet connection USB connection Various hoses and connecting cables Electrodes / sensors as shown in the pictures Fluoride test paper Eppendorf PhysioCare Box Accessories as shown in the pictures Application areas Chemical analytics Laboratory analysis Quality assurance Research and development Pharmaceutical industry Food and beverage industry Petrochemical industry Fine chemicals Cosmetics industry Water and environmental analytics Dimensions (W x D x H): 210 x 246 x 250 mm Weight: 20 kg Condition Used Optical condition as shown in the pictures Device powers on Touchscreen displays the user interface Scope of delivery as shown in the pictures Scope of delivery 1x METTLER TOLEDO T90 Titration System 1x Touchscreen terminal Several Dosing Units / Dosing Modules Titration arm / Electrode holder Electrodes, hoses, cables and accessories as shown in the pictures The table shown in the photos, or other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. Subject to change, errors and prior sale. We are happy to answer any further questions by phone.

Condition: used, HUBER Water-cooled recirculating chiller Huber Unichiller 060Tw High-performance process chiller with Pilot ONE touchscreen control For sale is a used water-cooled recirculating chiller from Peter Huber Kältemaschinenbau. The unit is suitable for the precise temperature control and cooling of machines, technical equipment, laboratory applications, chemical processes, and industrial process circuits. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Type of unit: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: at +15 °C: 6.0 kW at 0 °C: 5.0 kW at -10 °C: 3.1 kW at -20 °C: 1.7 kW Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 213 kg net Mains connection: 460 V / 3 Ph / 60 Hz Max. power consumption: 10 A Hfedjzui Uqjpfx Aqgon Fuse rating: 3 × 16 A Refrigerant: R507 Refrigerant quantity: 1.2 kg Max. pressure: 25 bar CFC and HCFC-free Circulation pump: Pump type: C3 Max. flow rate: 122 l/min Max. pump pressure: 5.6 bar Pump connection: G1 1/4 AG Cooling water: Cooling water connection: G1/2 AG Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption at 15 °C cooling water: Supply +15 °C: approx. 330 l/h Supply 0 °C: approx. 230 l/h Supply -10 °C: approx. 152 l/h Supply -20 °C: approx. 70 l/h Min. filling volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Pilot ONE control: 5.7" color touchscreen Graphical temperature display Program generator / ramp functions Digital level indicator Multilingual menu navigation Interfaces: Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Equipment: Water-cooled chiller C3 circulation pump Pilot ONE touchscreen controller 5.7" color display Digital level indicator Atmospheric open expansion tank Stainless steel housing Stainless steel circulation pump Copper-brazed evaporator Main switch RS232 interface USB interfaces Ethernet interface Pt100 connection Cooling water connections Process connections Castors Connection hoses as shown in the pictures Applications: Process cooling Machine cooling Laboratory applications Chemical processes Technical equipment Production equipment Cooling water supply Research and development Scope of supply: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures Condition: Used Unit can be switched on Pilot ONE touchscreen is functional and displays the operating menu Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees Hfjdpjx Scv Eefx Aqgen - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Rigid machine structure with large access doors. Integrated 600 dpi printer. Designer 2 user license. Slide-out mechanism (rear-side) for easy and fast label or ribbon replacement. Hfodpfozmxytex Aqgsn Label rotation programmable in 1° increments. Vacuum sensing of the label from pick-up to placement. CCD camera to read the label before pick-up. Controlled by an industrial PC. Conveyor width adjustment using a hand crank. PCB side clamping. Active support base including 4 magnetic pins. Quick product change-over. Selectable by-pass operation. Uninterruptible power supply (UPS). SATO bar code printer EX2 Tower light display for machine status. CE certified. SPECIFICATIONS Printer type: SATO (600 dpi) Minimum label size: 6 x 6 mm Label creation software: ZebraDesigner 2 Cycle time: 2.5 sec. per label (6 x 6 mm) Labelling area: 460 x 460 mm Conveyor type: 3 mm ESD edge belt Conveyor speed: 24 m/min System software: Windows Network interface: Ethernet Monitor: 21” high-density flatscreen PCB transfer height: 950 mm ± 25 mm* Component clearance: Top 30 mm, bottom 30 mm* Machine interface: SMEMA* Colour: RAL9002* Power supply: 230 VAC/50 Hz/1 Ph Power consumption: 700 VA max. Air supply: 6 bar Air consumption: 70 ltr/min max. Noise level: Max. 65 dB * or specify MACHINE SIZES Machine L x W x H (mm): 850 x 1680 x 1440 Weight (Kg): 750 Applicable PCB Length (mm): 80 - 508 Applicable PCB Width (mm): 65 - 460 PCB thickness (mm): 0.6 - 4 Fixed rail to front (A) (mm): 335

Condition: ready for operation (used), Year of construction: 2016, operating hours: 3,830 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details. • Condition: Very good, fully functional • Working hours: 3830 h • Machine under power: Yes • Cutting system: CNC plasma / oxy cutting • Plasma generator: PP130A (included) • Max cutting thickness: up to 30 mm • Machine parameters: • Installed power: 4 kW • Power supply: 400 V / 3 PH / 50 Hz • Input current: 6 A Hodezh U E Uepfx Aqgsfn • Plasma generator parameters (PP130A): • Max power consumption: 26 kW • Power supply: 400 V / 3 PH / 50 Hz • Max input current: 40 A • Weight: 520 kg • Documentation included: user manual, operation manual, technical documentation

Year of construction: 2017, condition: used, Biological lactic acid plant for the production of lactic acid to adjust the pH of beer wort. In two fermentation tanks, each with a capacity of 40 hl, the wort is fermented by lactobacilli to produce lactic acid at 45–50 °C. Each tank is fitted with a sampling tap, two heating elements, a safety valve and a vacuum valve. Additional components: - 2 plate heat exchangers - 2 inductive flow meters - 2 centrifugal pumps - Pipework Additional title: Two-tank system for supplying lactic acid to the brewhouse Tank volume each: 4000 l Operation / Control: visualized in ProLeit Material: Tanks made of 1.4571 and 1.4404 stainless steel (AISI 316Ti and 316L) Hfsdpszizdaofx Aqgon Position: tanks standing on 3 feet each Base construction: cylindrical tanks with dished bottoms Features: Each tank is fitted with: cladding, safety valve, vacuum valve, 2 x heating elements, sampling tap, outlet pipe with manual valve; Miscellaneous: 2 x centrifugal pumps, 2 x heat exchangers, 2 x flow meters; pipework

Condition: ready for operation (used), Year of construction: 2020, stroke length: 260 mm, total height: 2,675 mm, overall weight: 8,400 kg, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, This 4-axis Baykal APHS 31120 press brake was manufactured in 2020. It features a 120-ton press force, a bending length of 3100 mm, and a Delem 66t CNC control unit for precise operations. The backgauge X range extends to 1000 mm, and it includes European clamping with a sectioned punch and die. Consider the opportunity to buy this Baykal APHS 31120 press brake. Contact us for more information about this machine. Additional equipment • AC brushless servo driven backgauge with ballscrews • Proportional valve hydraulics: Rexroth or Hoerbiger • Precision linear scale measurement: Heidenhain or Givi Misure • European clamping system with 85° sectioned punch and 4-V die • Double footswitch console • Electrically interlocked side guards Machine Benefits Technical Machine Benefits • System pressure: 280 bar Hfjdpozbcnfefx Aqgjn • 4-axis press brake (y1, y2, x, r) • Distance between frames: 2550 mm • Throat gap: 410 mm • Max. Stroke adjustment: 260 mm • Backgauge x range: 1000 mm (x and x-r types) • Backgauge fingers: 2 pcs • Cnc crowning wedges on bottom table • Tooling is included in the offer • Excellent condition, almost like new Extra Information Movement Approach Speed: 160 mm/s Working Speed: 10 mm/s Return Speed: 130 mm/s Table Width: 60 mm Voltage: 400 V / 50 Hz / 3 Ph Delem 66t color graphical Windows CNC control unit Technical Specification Bending Length 3100 mm Dimensions Machine Depth 3850 mm

Year of construction: 2008, condition: like new (used), LEWA Inline Dilution and Dosing Systems These mobile dosing units (2 units) are designed as inline dilution and dosing systems. They are used for the precise production and delivery of liquid mixtures/buffer solutions directly in the production process, without the need for separate mixing tanks. Dosing range: 1st unit 60 - 2,100 and 2nd unit 15 - 800 liters/hour LEWA Ecodos - dosing pumps for highly precise dosing of different liquids Diaphragm valves and pressure holding valves for exact pressure and flow regulation Static mixer, which homogenously mixes the added media Measuring and control technology such as flow meters, pressure sensors, pH and conductivity meters for process monitoring Control and operation: Simatic 15 Touch Panel PC 667 Controller: Simatic S7-300 Data recording: Yokogawa DX 220 P recorder Liquid analysis system: Mettler Toledo M 700 Hfjdpfx Aqezl S Stjgsn Manufacturer: LEWA Year of manufacture: 2008 Space requirement: approx. 210 x 130 x 220 cm + approx. 150 x 90 x 165 cm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, KERRAJET S7 1400 Name: KERRAJET S7 1400 Producer: KERAJET Product number: 1870019 Year of production: 2018 Network: Ethernet connection 10/100 BASE-T / 1 Gb System: Piezoelectric DOD Design format: psd,tiff Printhead unit: KERAjet K45 (Xaar Head 2001) No Bars/ Mod./Tray of color 4 bars PH per bar or module or tray 4 colors Total= 24 PH K45: 12, 24, 36, 48 , 60, 72 pl Printing speed (conveyour) Up to 50 m/min Printing width (mm) Bench-350 -decorating width – H_350 and V_60 mm K45: 720x720 at 35 m/min Depending of the resolution and mode: K45 (760 dpi binary mode: 220 ml) Bench system: Conveyor system precision Environment conditions: 30%-80% without condensation Upright resolution: K45: 720 dpi Horizontal resolution: K45: 720 dpi at 35ml/min Vacuum system: NO Ink active system: YES Printing way to define Electrical requirements: 380V 3Phases+Neutral Power: 23 KVA (K700) / 35KVA (K1400) Air pressure: 6 Bar-Max 500L/min Double ink bar: YES Colordirect: YES tile thickness the entry will be ready for 40 mm Environment temperature: 25oC-28oC Max Piece temperature:M 50oC Diamensions and weight: MASTER700 4,65 x 2,069 x 2,27m./ 2850 Kg. Hfodpfoyr Hw Sex Aqgsn The printer is dismantle and wait for the customer in our warehouse

Condition: ready for operation (used), Year of construction: 2019, operating hours: 17,000 h, clamping force: 500 kN, screw diameter: 18 mm, Electrical injection moulding machine manufactured in 2019. This SUMITOMO SHI DEMAG Intelect 2 50/360-110 features a clamping force of 50 t and a screw diameter of 18 mm. It offers a maximum specific injection pressure of 2800 bar and a maximum dosing volume of 23 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Intelect 2 50/360-110 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2800 bar- Max. Dosing Volume: 23 cm³- Mold Height Min-Max: 160 mm - 350 mm- Tie Bar Clearance: 360 mm- Centering Diameter (Fixed / Movable Plate): 125 mm / 125 mm- Maintenance Group: 1- Core Pulls: 2- Working Hours (Drive): 17000 hrs- Ejector Force: 21 kN- Ejector Stroke: 120 mm- Max. Ejector Speed Stage 1: 333 mm/s- Max. Injection Speed: 200 mm/s- Mains Voltage: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Hot Runner Control: 3 zones integrated, 2.75 kW- Integrated Hydraulic Servo Power Unit: Max. 25 l/min Hfsdpfxsz Eq Scs Aqgsn