Used Spring Manufacturing for sale (40,157)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, Fully operational block production plant equipped for both concrete and lightweight expanded clay aggregate (LECA) block manufacturing. Currently in use — production process can be demonstrated on site. Key Features: Metalika concrete mixer (2023) with integrated precise moisture sensor Many new moulds available Average production capacity: • 270 m² of pavement blocks per shift • 50 m³ of LECA blocks per shift Technical Specifications: Upper and lower vibration system 1.5 m³ ready-concrete hopper 0.75 m³ mixer with 11 kW motor 8 m³ material bunker Hydraulic power unit Water metering system Precise moisture meter Adjustable/variable production speed Automatic production pallet de-stacking and stacking Pneumatic palletizing gripper Large quantity of production pallets included Technical specs LM concrete block plant (year 2005): • Vibration frequency – 3000 rpm • Vibration amplitude – 0.7 mm • Exciting vibration force – up to 12 kN The nominal pressing force in vibrating mortar is achieved by setting the hydraulic pressure parameters • Cycle duration – from 30 to 50 seconds, depending on the product and operating mode. • Moulding dimensions: o tile plate – 800×500×100 mm o wall elements – 800×500×200 mm • Installed power – 6 kW, 380 V, 50 Hz • Machine dimensions – 2000×4000×2000 mm • Machine weight – 2.5 t • Drive type – hydraulic • Nominal pressure – 14 MPa (140 bar) • Pump pressure – 25 MPa (250 bar) • Working fluid volume – 180 l • Oils used – HPM46 • Machine control – process-following electro-automation Concrete mixer (Metalika, year 2023): • Mixers geometrical volume: 750 L • Dosage of cement and aggregate: By weight • Mixers output height from ground: 1.4 m • Water dosage: 50 ml impulse Giodpfxjy S Rvts Ahveu • Belt conveyor for aggregate: Yes • Mixer engine: Motor 11 kW • Vibromotor: 2 × 0.27 kW • Snail transporter engine: 2.2 kW • Hydraulic power pack: 4 kW • Total power: 18 kW • Number of aggregate belt conveyors: 1 • Aggregate and cement scale: Yes, above the mixer • Automatic operation: Yes • Capacity max: 8 m³/h • Capacity of sand hoppers: 1 × 6 m³ 3) Ludwig WAPP moisture controller (year 2023) 4) Pneumatic Cubing Clamp Probst ATZ-P4 (year 2023) Current molds in stock (size in mm): Building blocks (LECA blocks): 1) 500x300x200 2) 400x200x200 Pavement stones: 1) 200x100x50 2) 200x100x60 3) 200x100x80 4) 180x120x60 5) 180x120x80 6) 240x60x80 7) 300x300x60+300x150x60+150x150x60 8) 240x240x60+240x120x60+180x120x60+120x120x60+120x60x60 9) 300x300x80+450x300x80 Kerb stones: 1) 800x200x70

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: Giodju Ic Hnjpfx Ahvju 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Gijdpfev Im Swsx Ahvju Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 - Year of manufacture: 1993 Giedpfxeygm D Uj Ahvju - 380 Volt - 3 speed settings - good condition Transport possible at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Table saw with sliding table TKU 315 - 220 Volt - Blade diameter: 315 mm - Year of manufacture: 1992 Margin scheme (differential taxation) Godpfx Asypm I Sjhveiu Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: good (used), Year of construction: 1967, functionality: fully functional, Metal cut-off saw Type LMS I - Year of manufacture: 1967 - 380 Volt - 1450 rpm; 2950 rpm Gisdpfexa Hkmox Ahvou - 1.8 kW Transport available at an additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: excellent (used), EXTRUDER SCREW & BARREL manufacturing machine CNC milling machine for extruder screws (thread and gear milling machine) Manufacturer: Wanderer Model: GF 34 CNC Year of manufacture: 1991 4-axis Siemens Sinumerik 3M (GA4) path control, electronic handwheel Equipped with RF radial milling head for machining extruder screws with climb milling unit, automatic chip conveyor, coolant system. Includes: 1 fixed steady rest, 2 clamping steady rests, 2 bushing jigs, 1 chuck, RF milling head, safety enclosure with sliding doors, operating keys, machine manuals, control documentation, etc. Main drive: 20 kW DC motor Max. workpiece diameter: 600 mm Milling length: 2150 mm Thread pitch: 1 – 9999 mm Workpiece diameter over support: 160 – 320 mm Spindle bore: 120 mm Number of teeth (min./max.): 4 – 100 Tool holder: ISO 50 Infinitely variable longitudinal feed: 1 – 5000 mm/min Gijdpfxjyldq As Ahvsu Max. workpiece weight: 2,000 kg Electrical connection: 380 V / 50 Hz Total power requirement: 50 kW Machine weight: approx. 10,000 kg

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turning and milling parts, equipped with integrated spindle motors (ISM) on both main and sub-spindle, featuring a thermal compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Sub-spindle: 22 kW Speed range: Main spindle: 0-5,000 rpm Sub-spindle: 0-7,000 rpm Spindle interface (DIN 55026): Main spindle: KK6 (max. bar capacity 65 mm) Sub-spindle: KK6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute resultant cutting forces over two axes, providing exceptional rigidity for all machining operations. All linear axes feature preloaded roller guides, a digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D control. Includes: * Hollow clamping cylinder with draw tube * Parts ejector and flushing system through the sub-spindle * 2 x 12-position VDI 30 tool turrets, radial mounting with direction logic, accommodating up to 2 x 12 driven tooling stations * Swivel speed adjustable via feed selector Performance data: Max. 6.7 kW at 2,650 rpm Constant torque: 25 Nm Speed range: 0-5,000 rpm - C-axis for main and sub-spindle - TRANSMIT software for simple C-axis programming * Finished parts unloading device * Sinumerik 840D Gisdpfoy Svz Iox Ahvou * Chip conveyor with programmable discharge height of 1,200 mm (hinged belt type) * Integrated coolant system in the chip conveyor: 2 high-pressure pumps at 14 bar 2 rinsing pumps at 3.7 bar * Electrical cabinet cooling unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Documentation IMPORTANT: Export/re-export from the EU requires an export license R7AW2001 – Year of manufacture: 2008 Including: S6Z170 PC keyboard Siemens R7Z460 Machine installation and mounting hardware X1Z100 EMCO standard bar feeder interface R7Z030 Alarm lamp R7Y750 Finished part transfer conveyor, crosswise S6Z900 EMCO TOPLOAD 10-65/3300 R7Z620 Automatic tool setter – HT665 S6Z110 Setting gauge VDI 30 + Various static and driven tool holders + Clamping devices for main spindle and sub-spindle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Production of paving stones, grass pavers, etc. Drying unit Gedpfxoy Sin Uj Ahveiu Palletizing system

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Year of manufacture: 1988 Cutting capacity: 5300 x 2200 mm Cutting thickness: 80 mm Horizontal cutting height: 2100 mm Built-in extraction device Manual or automatic feed: 11/17/22/33 m/min Machine width: 6300 mm Saw blade: 300 ø Gisdpfoy Nyr Ssx Ahveu 7.5 HP motor Digital measuring system horizontal and vertical Machine ready for immediate use Very good condition Ex-site Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: excellent (used), mileage: 14,976 km, power: 169 kW (229.78 HP), first registration: 06/1991, fuel type: diesel, color: red, fuel: diesel, wheelbase: 4,840 mm, driver cabin: day cab, gearing type: mechanical, Year of construction: 1991, total width: 2,500 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,250 kg, permissible axle load (axle 3): 6,750 kg, Technical information Number of cylinders: 6 Axle configuration Maximum front axle load: 7,100 kg Godpfx Ajuuqnxjhvoiu Rear axle 1: Max. axle load: 11,250 kg Rear axle 2: Max. axle load: 6,750 kg Weights Unladen weight: 11,100 kg Payload: 14,000 kg Gross vehicle weight: 25,100 kg Environment Emission class: Euro 0 Condition Technical condition: very good Visual condition: very good Identification Registration number: VP-19-LX Product safety EU responsible: Vitáli Lenda, Koegorsstraat 38, 4538 PK Terneuzen, NL Further information Please contact Vitali Lenda for more information.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 03/1995, suspension: steel, tire size: 425/65-R22.5, Year of construction: 1995, Equipment: ABS, = Additional Options and Equipment = - Leaf suspension - Drum brakes = Notes = 1995 FLANDRIA 20FT chassis with ABS, leaf springs (3 leaves), ROR axles with drum brakes (2 x 10,000 kg), 20FT, 425/65-R22.5 tires (L: 14/13 mm; R: 14/15 mm), Empty weight: 3,110 kg, Gross vehicle weight: 30,000 kg, Belgian registration with valid technical inspection until: 13/06/2026 = Further Information = Axle configuration Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 90%; Tire tread right: 90% Rear axle 2: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 85%; Tire tread right: 95% Gedpfoyt Rtyox Ahvoiu Weights Empty weight: 3,110 kg Payload: 26,890 kg Gross weight: 30,000 kg Functional Body manufacturer: FLANDRIA OP CC 2 A Condition General condition: average Technical condition: good Visual condition: average

Condition: good (used), mileage: 244,950 km, power: 309 kW (420.12 HP), first registration: 01/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Year of construction: 2020, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, navigation system, parking heater, traction control, trailer coupling, Technical information Number of cylinders: 6 Godpfsy Hqtusx Ahvsiu Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65R22.5; Max. axle load: 9000 kg; Steering Rear axle 1: Tyre size: 315/80R22.5; Double wheels; Max. axle load: 10500 kg Rear axle 2: Tyre size: 315/80R22.5; Double wheels; Max. axle load: 10500 kg Weights Empty weight: 12.278 kg Carrying capacity: 16.722 kg GVW: 29.000 kg Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: good Visual appearance: good = Additional options and accessories = - Adaptive Cruise Control - Aluminium fuel tank - Climate control - Coupling - Differential Lock - Heated Mirrors - Lane Assist - Leaf spring suspension - Load protection grid - PTO - Radio/Cd/Audio system - Radio/CD player - Speed limiter - Stability control - Vehicle heater - Visor

Condition: excellent (used), mileage: 315,000 km, power: 338 kW (459.55 HP), first registration: 03/1996, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x6, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 300 l, color: orange, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1996, Equipment: ABS, differential lock, = Additional Options and Accessories = - Heated mirrors - Leaf spring suspension - Driver comfort seat - Differential lock - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Tipping hydraulics - Air horns on cab roof - Hub reduction axles - Radio/CD player - Warning beacons - Sleeper cab - Sun visor - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF16 manual transmission = Notes = HEAVY DUTY M.A.N. 33.463DFT SLEEPERCAB 6x6 TRACTOR UNIT, FULL STEEL SUSPENSION (LEAF SPRING), HUB REDUCTION AXLES & ZF MANUAL GEARBOX & HYDRAULIC SYSTEM! 460HP, EURO 2, 6-CYLINDER ENGINE! ZF MANUAL GEARBOX! FULL SPRING SUSPENSION! HUB REDUCTION AXLES! P.T.O.! HYDRAULIC KIT! ETC.! THE TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT WORK! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE FROM STOCK! (>75 TRUCKS/TRAILERS IN STOCK)! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,816 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 speeds, manual transmission Axle configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Differential lock; Max. axle load: 7,500 kg; Steering; Left tire tread: 30%; Right tire tread: 30%; Reduction: external planetary axles Rear axle 1: Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tire tread: 50%; Left outer tire tread: 50%; Right inner tire tread: 50%; Right outer tire tread: 50%; Reduction: external planetary axles Rear axle 2: Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40%; Reduction: external planetary axles Weights Kerb weight: 10,800 kg Payload: 22,200 kg Gross vehicle weight: 33,000 kg Godpfsyv Ax Iex Ahvsiu Functionality Platform height: 145 cm Condition Technical condition: very good Visual condition: very good Further information Please contact the Sales Department or Erik Engel for more information.

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Gjdpfxoy Ncfuj Ahvoiu Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: excellent (used), mileage: 708,479 km, power: 235 kW (319.51 HP), first registration: 07/2008, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: parabolic leaf (spring), total length: 8,400 mm, total width: 2,550 mm, total height: 3,100 mm, Year of construction: 2008, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, power assisted steering, = Additional Options and Equipment = - Parabolic suspension - PTO (Power Take-Off) - Radio/CD player - Sun visor = Notes = TRANSPORT TO ANTWERP 590 EURO = Further Information = Axle configuration Tyre size: 315/80 R22.5 Suspension: Parabolic Front axle: Steered Rear axle 1: Dual wheels Rear axle 2: Dual wheels Weights Unladen weight: 13,550 kg Payload: 12,450 kg Gedpfxsypfb Ds Ahvjiu Gross vehicle weight: 26,000 kg Functionality Tipper: Rear Condition Technical condition: Very good Visual condition: Very good Identification Reference number: 98

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Giodpfoy Nx Hbox Ahvsu Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: excellent (used), Year of construction: 2020, PUTZMEISTER CONCRETE PUMP M760 2020. Concrete pump PUTZMEISTER M760 after full service Year; 2020 Mileage; 429h!!! Gijdpfx Astq R Ukehvsu ENGINE; KUBOTA 48,5Kw Pressure;10bar Machine in perfect condition ready to work (no hoses) net price: 137900 zł gross price: 169617 zł Below is the link to the video

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Gsdpfoiz Ddkjx Ahvoiu

Condition: new, 6.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features. The machine is widely used for agriculture double torsion springs, but not only : it can produce an extensive range of torsion, double-torsion, extension springs, as well as wire and strip forms Gedpfx Aji Ik Ayjhvjiu

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Giodpfxji Ik H Ij Ahvju

Year of construction: 1985, condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Giedpfx Ahef I Uumsveu

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Godpfx Aolf Ek Djhvoiu

Condition: new, Cam-driven spring forming machine. A well-proven machine which each spring manufacturer should have in its spring shop for one the best ratio 'price / quality of production' on the market. Gsdpfxji Ik Hre Ahvoiu

Condition: excellent (used), first registration: 03/1999, axle configuration: 2 axles, color: other, Year of construction: 1999, Empty weight: 8.670 kg Gijdpsy Ezc Dsfx Ahvsu Carrying capacity: 26.330 kg GVW: 35.000 kg Technical condition: very good Visual appearance: very good Registration number: UTB974 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A