Used Stabile Tenbacon Amf for sale (5,277)

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,727 h, functionality: fully functional, overall weight: 4,824 kg, fuel type: diesel, tank capacity: 1,000 l, power: 160 kW (217.54 HP), output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 200 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Stamford, For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h. A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects. The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently. Bodpfey R D Hcex Aphedf The retrofit system combines proven exhaust aftertreatment technologies including: Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) SCR system with AdBlue injection The DPF reduces particulate emissions, while the SCR system lowers NOx emissions. The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions. This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine. Installed HJS components: 10.5” DOC 10.5” DPF 13.0” SCR 80-litre AdBlue tank Control unit Telematic unit AdBlue pump Fuse box Display The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours. This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations. Technical Specifications: Generator make: Powerplant Model: AS200 IS2 Prime power: 200 kVA Engine: Iveco CURSOR87TE1F.S550 Engine power: 160 kW RPM: 1500 Alternator: Stamford UCI274H1 Control panel: Deep Sea Electronics DSE7410 Housing: Canopied Year: 2015 Dry weight: 3762 kg Wet weight: 4824 kg Voltage AC: 400V / 230V Voltage DC: 24V Frequency: 50 Hz Serial number: 4184/01 Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data. If you have any questions or require further information, please contact us.

Condition: excellent (used), Year of construction: 1985, fuel type: diesel, color: other, 2954 = More information = Year of manufacture: Jul 1985 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Bedpfx Apjymrmbehedf No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: like new (used), The subject of my auction is a conveyor belt with a length of 5 m. Belt width: 0.4 m. Possibility of transport. Bdsdpfxjwfdgfj Aphjf

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, For sale: Stamford HCM634J2 alternator. 675 kVA, 690 volts. Rotor is new. Stator is used but refurbished and in good condition. Bdsdpfx Ajyt Hhtjphef

Condition: like new (used), functionality: unexamined, machine/vehicle number: 30/30, Camfil Hepa Air Filters 30/30, 6 pieces per box. Manufacturer: Camfil LTD Model: 30/30-16202nomsp616 Unit dimensions: 508 x 406 x 50mm For sale as a lot of 20 boxes. Bedpfoxp H I Rox Aphsdf

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Manufacturer: Camfil KG Bedpfsyrnfwjx Aphsdf Model: CS 610 painted Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2

Condition: repair required (used), color: green, output voltage: 690 V, ambient temperature (max.): 40 °C, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, machine/vehicle number: 0852773/01, The generator is as shown in the photos. It is offered on an "as is" basis, so there are no warranties or returns. For more details, please contact us. Technical Features: Serial Number: 0852773/01 Machine ID: P05E388280 Frame/Core: LVSI804W2 KVA Base Rate (BR): 3555 KW Base Rate (BR): 2844 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Amperage Base Rate (BR): 2974.6 Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 75V Excitation Amperage: 3.70 Ambient Temperature: 40°C Bdsdpewbhi Asfx Aphof Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding (Stator Connection): STAR

Condition: repair required (used), output voltage: 400 V, ambient temperature (max.): 40 °C, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, machine/vehicle number: A16H328962, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. For more details, please contact us. Technical Specifications: Serial Number: A16H328962 Frame/Core: HCG634H2 KVA Base Rate (BR): 731 KW Base Rate (BR): 584.8 Amperage Base Rate (BR): 1055.1 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 400V Phases: 3 Power Factor (PF): 0.80 Service: Continuous Excitation Voltage: 58 Excitation Amperage: 3.3 Ambient Temperature: 40°C Bodpfjtynqpex Aphsdf Temperature rise: 105°C Thermal Classification: 180°C Protection Class: IP23 Insulation Class: H Stator Winding: 312 Stator Connection: Star

Condition: repair required (used), machine/vehicle number: 0855555/01, color: green, output voltage: 690 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, type of cooling: air, ambient temperature (max.): 40 °C, The generator is presented as in the photographs. It is offered on a "seen and liked" basis, so there are no warranties or return options. The alternator has cracks on the rear crankcase and requires inspection before use. Bdodpfetu Hypox Aphjf For more details, please contact us. Technical Specifications: Serial Number: 0855555/01 Machine ID: P08J155680 Frame/Core: LVS1804S2 KVA Base Rate (BR): 2790 KW Base Rate (BR): 2232 Frequency (Hz): 50 Revolutions Per Minute (RPM): 1500 Voltage: 690V Phases: 3 Base Rate Amperage (BR): 2334.5A Power Factor (PF): 0.80 Rating: CONT (Continuous) Excitation Voltage: 68V Excitation Amperage: 3.60A Ambient Temperature: 40°C Protection Class (Enclosure): IP23 Insulation Class: Class H Stator Winding: 65 Stator Connection: Star

Condition: ready for operation (used), Year of construction: 2024, A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible. Bodpjuh Ayxsfx Aphsdf

Condition: used, machine/vehicle number: 432, empty load weight: 9,200 kg, maximum load weight: 20,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/2001, next inspection (TÜV): 11/2023, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, loading space volume: 82 m³, suspension: air, tire size: 385/65 r 22,5, color: white, Equipment: ABS, tail-lift, * Drum brake * Wheelbase 1,810 mm * Dhollandia type DHLSU 3,000 kg * BPW axles * Forced steering on the last axle * Aluminum rims * Lifting and lowering mechanism Bdodpfx Ajluby Rephef Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg Bdodpozq R R Sofx Aphof 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 Bodpfozphz Esx Aphodf ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, feed rate X-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, position of the milling head: verticale, spindle speed (max.): 24,000 rpm, table width: 1,200 mm, table load: 3,000 kg, table length: 1,200 mm, table height: 1,200 mm, overall weight: 26,000 kg, We are offering this Rambaudi RAMFAST 105 mobile table milling machine in like-new condition, manufactured in 2007. The price is negotiable and we are looking for a quick sale. Bedpfx Aoy Uhq Hjphjdf If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 Bdedpfx Aszmncqephsf 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), HSS saws chamfering machine EYAN Bdedpfx Apjhzcd Uehjf

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FNE3J07CM027248, compressed air connection: 6 bar, overall weight: 128 kg, Wamflo Filter elements: elliptical sleeves Filter diameter: 800mm Bjdpfx Aozgubtephjdf Cleaning system: compressed air Filter surface area: 7m2 Filter length: 920mm Filter material: stainless steel

Condition: like new (used), functionality: fully functional, SBAVATRICE A NASTRO PER LAMIERA usata, FIM-SCHIAVI (GECAM-FINTEC 844). Bodpfx Aszhuiasphsdf

Condition: excellent (used), Wittmann Temperature Controller Here we offer a Wittmann temperature controller. Wittmann Temperature Controller DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used Bdedpfezd Ruwox Aphjf Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2019, overall weight: 63 kg, chuck outer diameter: 315 mm, Metal cutting Tooling SCHUNK - ROTA-M flex 315 2+2 MACH-ID 9634 Make: SCHUNK Type: ROTA-M flex 315 2+2 Year: 2019 Product Features: 4-jaw compensating chuck Centric compensation of opposing jaws Spindle mount: ISO 702-4 No. 8 (Z220) Jaw interface: 1/16" x 90° Nut 17H7 Technical Data: Stroke per jaw: 9.5 mm Bdedpfozcnn Tsx Aphef Compensation stroke per jaw: 5.1 mm Maximum clamping force: 100 kN Maximum torque: 120 Nm Maximum rotational speed: 2200 rpm Weight: 63 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Height: 1,7 m Power: 5 kW, 3x400 V+N Bdedpfowduvnjx Aphjf Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Bdodpfx Aoyl Upvjphef Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Year of construction: 2012, condition: excellent (used), Geppert belt AM-F 7.30m x 0.30m with drive The plastic modular belt AM-F is characterised by its slim design. The width of the frame is only 14mm more than the chain. At the deflection it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are optimal to clean, particularly hard-wearing and maintenance by replacing individual links is easy to realise. Bdsdeg Ib U Hopfx Aphsf Technical data: Year of manufacture: 2012 Length: 7.30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete factory lock, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2013, condition: ready for operation (used), Muller Martini Streamfeeder, year of construction 2013 Bedst Iyhzspfx Aphjdf

Condition: new, Year of construction: 2025, functionality: fully functional, Rotating basket parts washing machine for washing engine blocks and parts - new machine Technical details: Basket diameter: 900 mm Loading Height: 450 mm Loading Capacity: 300 kg Bsdpencfmvjfx Aphedf Tank capacity: 80 lt Pump pressure: 2,5 bar Pump power: 3,0 Hp Heater: 7,5 kw Electricity (V/Phase/Hz): 220-380-415/3-1/50-60 Timer: 0 - 90 min. Working temperature: 0-90 C° Packing size:1450x1080x1340 mm Packing weight: 300 kg Main dimensions: W x L x H: 1100 x 1100 x 1150 mm Weight: 350 kg The parts washing machine is also available in larger sizes! Larger machines: AWM1250: With 1150 mm basket diameter and tank capacity 200 lt AWM1500: With 1350 mm basket diameter and tank capacity 300 lt If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines