Used Startrite 30 Rwh for sale (24,667)

Year of construction: 1992, condition: ready for operation (used), An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible. Ledpfjzq Edasx Aa Rsrr

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Lrjdji Amnpspfx Aa Rsr Location: Ex works - available for immediate delivery -

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Lrsdpfezl Tu Ajx Aa Rjr Technical specifications: Pressure: max. 165 bar Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 13,610 h, load capacity: 3,000 kg, lifting height: 4,950 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,214 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic/Dual pedal Condition: Ready for use and fully functional Lredpfszllfyjx Aa Ror Technical condition: good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection, including inspection certificate. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would also be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase equipment from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes and errors. Side shifter, fork positioner Kaup double pallet clamp 3rd valve, 4th valve, rear work light, front work light, half cabin, solenoid valve, dust filter, air conditioning, full free lift, safety light, seat heating, Comfort seat, fabric, seat heating

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm Lrodpjzld Nkofx Aa Rjr -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available -Price: per piece -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Condition: good (used), functionality: fully functional, used dough divider rounder Record Erika Automat Classic Q2 30 tlg, checked, with moulding plates, for 30 pieces, weight range from 25 to 120 g, machine no. A110311, 1.5 kW, 3,8 A, 380 V, 50 Hz Lrodpfx Aasy I A Rns Rjr

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Lrsdezmwq Depfx Aa Rer Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: used, empty load weight: 5,240 kg, maximum load weight: 35,760 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, suspension: air, tire size: 385/55 22,5, tire condition: 30 %, wheelbase: 1,310 mm, color: black, Year of construction: 2020, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates Lodpfxozd Nvge Aa Rerr * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Lrodpfozndurox Aa Rsr Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Lrjdozm Izyepfx Aa Rjr Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 5 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), machine/vehicle number: 10403, Standart Machine 4-head Lodpszqr Sdjfx Aa Rjrr

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Ledpfsigqqhsx Aa Rorr

Condition: ready for operation (used), Year of construction: 2002, Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Lrodpfxex A Izlj Aa Ror

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine Ljdpfx Aajzqvbpj Rorr No CNC knowledge required, extremely easy to operate Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Spindle speed: 200-2000 RPM Touchscreen: 21.5" Factory inspected

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 430 mm, area performance: 1,160 m²/h, overall weight: 127 kg, tank capacity: 30 l, total height: 1,020 mm, total width: 560 mm, total length: 1,210 mm, water tank capacity: 30 l, battery voltage: 24 V, gradeability: 2 %, TECHNICAL SPECIFICATIONS FEATURES Lodpfxozpxm Se Aa Rerr Working width (cleaning) mm 430 Working width (vacuuming) mm 650 Area performance/hour (theoretical - practical) m²/h 1720 - 1030 Power supply Battery 24V Power consumption W 600 Drive type Manual IP rating IPX3 BATTERIES Type Gel battery set (2 units) 12V 50Ah (*) Battery life h - min 1 h and 30 min Dimensions battery compartment x quantity mm x no. 340x340x240 X 1 BRUSHES Diameter pad x quantity mm - inch x no. 430 - 17” x 1 Motor power x quantity W x no. 200 x 1 Motor speed rpm 120 Weight (head) - specific pressure Kg - g/cm² 18 - 17.4 TRACTION Motor power W --- Maximum travel speed Km/h 4 Climbing ability at full load % 2 VACUUMING Motor power W 400 Vacuum (water column) mbar - mmH2O 1189 Airflow rate l/s 28 Noise level dB(A) 64 TANK Type Double tank Capacity (cleaning solution) l 30 Capacity (dirty water tank) l 33 Weight (without/with batteries) Kg 66 / 104 Dimensions mm 1210x560x1020

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving 📋 Consists of: • 31 x pre-assembled frames / approx. 230cm high / 40cm deep / new • 90 x shelves / 100cm long / 40cm deep / 200 kg load capacity / used • 10 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price € 2,670,- net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: immediately available • Inspection and pickup: possible at any time by appointment • Product number: P1087 Constantly over 5000 linear meters of pallet racking systems from numerous manufacturers in stock (Changes and errors in technical data, information and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truck loads for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer! Lrsdpfxjcfhx To Aa Ror

Year of construction: 2023, condition: new, MRS 300 is a multi-blade rip saw. Machine frame is cast-iron, all the main parts are enclosed, ensuring protection and perfect stability. Feeding unit is straight line caterpillar style, feeding with heavy guided chain. Chain blocks are special cast iron with heat treated and precision ground pins. Nickel-chrome steel saw srbor with 70 mm spindle. Locking mechanism is made with quick release sleeve system. Machine is on stock and can be delivered quickly! The price is valid for a version with motor power of 30 hp. FEATURES: - 3 sets of anti kickback fingers. Two at the top and one at the bottom. - powered lifting and lowering the pressure rollers - new style round fence bar support with quick shift long fence - automatic centralized lubrication system - automatic star-delta switch (slow speed start) and low voltage controls - C.E European guard and safety features - long fence for control of longer workpieces - Nominal voltage: 400 V (3-phase) Lsdpef Dql Tjfx Aa Rsrr

Condition: good (used), loading space length: 8,900 mm, loading space width: 1,720 mm, loading space height: 2,130 mm, color: red, Year of construction: 1999, General information Field of application: Construction Drivetrain Type of fuel: Electric Lsdozanclepfx Aa Rjrr Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Lift height: 2.800 cm Working height: 3.000 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1160 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-06-30 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, Kuka robot KR 30 L16-2, KRC 2 ED 05, KRC 2, KCP2 industrial robot. Lrodjznkmhjpfx Aa Rjr

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 465, HAUL-OFF UNIT ME 30/4 - used machine, function-tested Lrodpfx Aetx Axrsa Rjr - Driven by 2 GS motors 0.8 kW each - Pull-off speed 0.5 to 10 m/min - Pull-off force max. 4,500 N - Caterpillar clamping pneumatic, weight compensation of the upper crawler carrier, Equalising tank for the compressed air supply - 2 transport chains 75 mm wide, 23 mm high, hardness approx. 70 Shore A profiled for roller shutter standard profile (smooth segments possible) - Protective panelling, limit switch protected - Control panel with approx. 12 m connection cable - Fixed extrusion height 1100 mm Central chain lubrication

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 BANFI TA 30 drum-type shot blasting machine, manufactured in 2012. Ljdpfx Aozrwy Noa Rsrr Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Maximum air pressure: 8 bar Weight: 18,000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2016, Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Lsdpek Abhtefx Aa Rjrr For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 Lsdpfx Ask Aa Ukea Rsrr RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Ljdjk Abuispfx Aa Rorr Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,847 h, load capacity: 3,000 kg, lifting height: 4,955 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Lrjdpfxozhp Iqe Aa Ror Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Workshop inspected, new UVV & inspection, new paint job Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, half cab, load guard, full free lift, CE certificate.