Used Stas 50 Cub Cereal for sale (39,398)

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle Hardox steel tipper 86 m³ First registration 01/2023, from first owner Mileage 188,744 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Continuous floor made of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable underrun protection at rear Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatically unlocked Reinforced roll-over tarpaulin HYVA tipping cylinder type Alpha, low pressure 2x pneumatic vibrators JOST crank landing gear, full load capacity SAF axles with large 430 mm disc brakes 1st axle is a lift axle WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard Cgodoy Dy E Uepfx Ad Not Lift and lowering function Automatic tipper lowering 6x 385/55 R 22.5 tires ALCOA Dura-Bright polished alloy wheels Aluminum access ladder Shovel and broom holder Tool box on left 4x LED reversing lights RENTING is the new BUYING – immediately available from us also on full-service lease

Condition: used, maximum load weight: 32,590 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 3,690 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Aluminum Tipper Semi-Trailer 52 cbm First Registration 04/2024 Mileage 152,817 km Internal Dimensions (LxWxH): 9,665 x 2,475 x 2,165 mm Pallet width Unladen weight 6,410 kg Floor made of continuous 8 mm aluminum with 110 Brinell Front wall 4 mm aluminum Side wall profiles 3 mm - 2 mm, with smooth finish inside and outside Twin-leaf combination doors with swing function, pneumatic remote unlocking 2 grain discharge chutes with 1x dust protection bag Reinforced roof tarpaulin HYVA tipping cylinder, Type Alpha, suitable for high and low pressure Full-load crank landing gear SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard lifting and lowering device Cgjdpfx Aey Dy Hfjd Nst Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolkit box on right side 4x LED reversing lights RENTING is the new BUYING, instantly available from us also as a FULL-SERVICE RENTAL-----

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy Cgjdoymnm Depfx Ad Not – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW Cgedpfx Adsx Sx S No Not - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES Csdsyg Iznopfx Ad Njgt – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Cedjymfazepfx Ad Negt Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 6309 TECHNICAL SPECIFICATIONS SURFACE PLANER: - shaft width: 510 mm - 3-knife cutterblock - adjustable tilting fence - table length: 1910 mm - both tables adjustable Cjdpfxsyyymke Ad Njgt THICKNESSER: - max thickness of processed element: 200 mm - thicknesser cutterblock guard from above: - anti-kickback fingers - geared feed roller - planing cutterblock - smooth outfeed roller - stepless feed speed adjustment: 7–14 m/min - main motor approx. 4 kW - cutterblock speed: 3000/6000 rpm - dimensions (LxWxH): 1910x870x970 mm - weight: 780 kg – Italian manufacture – Very good condition, used machine Net price: PLN 14,500 Net price: EUR 3,450 Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of major exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller - pressure bar - planer cutterblock Cedjx Swqkjpfx Ad Negt - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 03/2026, Equipment: ABS, Stas S300ZX Moving Floor Trailer 90 m³ * 90 m³ capacity * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Rolling tarpaulin * Smartboard * Double-wing rear door with rotary bar lock * Access ladder and platform at the front wall * ABS connector * 2 x 7-pin electrical connection * ISO pneumatic couplings with red and yellow coupling heads Cgsdpoxycilefx Ad Net * 21 planks * Lashing rings on the sides of the loading area * Foldable rear light guards * Load pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important Notice: Despite thorough checking of all details in our offer, errors may occur. Some are caused by transmission faults from various platform providers’ systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it contains information for initiating a contract. All details given are without guarantee and do not represent warranted characteristics.

Condition: new, axle configuration: 3 axles, loading space length: 12,355 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 608 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (national) (t): 12 * Axle load (national) (t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 Codpey Dmv Hofx Ad Nsgt * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: disc brake * Offset (ET): 120 * Option 1st axle: with lift axle and starting aid * Activation of starting aid via button in truck (mounting of button not included in standard equipment) and by pressing the brake pedal three times * Option 3rd axle: with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping process, can be manually locked via Smartboard as well as switch mounted to chassis * Pneumatic coupling head: European palm coupling * Control console: EBS control on left-hand side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Working light position (operated by switch): 2x LED reverse lights at rear, left and right (on lamp bracket) * Working light position (operated by switch): 2x LED reverse lights at the front, left and right, near landing gears * LEDs in door end crossmember: 2 x 3-function LED * Operation underrun protection: manual * Mudflaps underrun protection: Black with STAS logo * Cylinder tipping angle normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Mudflap type: Clear Pass mudguard * Toolbox: 860x520x500 * Air connection: left side in direction of travel, on lamp bracket * Aluminium access ladder: 3 m * Two plastic chocks * Chassis-body catch device: Rubber polyps Body: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Lower chord profile inside angle (°): 90 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted below floor cross-members * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door end crossmember * Door end crossmember: pivoting design * Slide position: 2 units, left + right * Additional rear wall locking: pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manual via control on side of instrument panel * Number and position of roof bows: 3 mid bows (evenly spaced) and 1 rear bow (at back) * Position and type of roof bow hinge: right

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis Cgodpsy Dmvmsfx Ad Njt * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe Cgodpfx Asy Dmvasd Njt * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 906 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm Cgedpjy Dmu Nsfx Ad Nst * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: good (used), axle configuration: 3 axles, first registration: 05/2011, loading space length: 10,000 mm, loading space width: 2,500 mm, loading space height: 2,150 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Unladen weight: 7,340 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body build year: 2011, Side wall material: Aluminium, Number of sides: 1 side, Axle type: MERCEDES-BENZ, 55M3 ALU, COIL = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 14 mm; Tyre tread right: 9 mm Axle 3: Tyre tread left: 10 mm; Tyre tread right: 7 mm Weights Empty weight: 7,340 kg Payload: 31,660 kg Gross vehicle weight (GVW): 39,000 kg Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Quite simply! • Large, rapidly changing stock Cjdpfx Ajw S Dfmed Negt • Recognizable quality • Competitive pricing • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of recognizable quality • And much more… Please visit our website for special offers and the complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: new, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5739 Immediately available! Purchase, lease or lease with purchase option available upon agreement! Approx. 91m³ Stas moving floor trailer with 10m floor / radio remote control / front maintenance door / RENTAL / PURCHASE ---- * Manufacturer: Stas * Model: S300ZX Biostar * Year of manufacture: 2026 * Gross vehicle weight: 42,000 kg * Unladen weight (manufacturer specifications): 7,800 kg * Payload: 34,200 kg * Axles: 3x SAF, 1st axle lift axle with starting aid / disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: air suspension with ECAS lift/lower function * EBS * Capacity: approx. 91m³ (13.50 m long x 2.47 m wide x 2.82 m high) * Colour: Body RAL 9006 / tarpaulin black SIO7999 / galvanized chassis * Twin rear doors with pneumatic locking * Extendable access ladder on right-hand side * Lift axle starting aid activated via truck control button * Smartboard * Telescopic landing legs * PVC toolbox 830x500x470 mm * 2 LED reversing lights, rear left and right * 2 LED reversing lights at rear supports * 1 LED front wall interior light Cjdpfx Adeyz H Sps Njgt * Ecoled 2 LED taillights * Cargo Floor 10 mm ribbed CF500SL-C -E Control * V2A stainless steel rear panel * Additional plastic guides below floor profiles * Radio remote control * Moving bulkhead wall * Rolling tarpaulin with Panama tension straps, 900 g/m² * Tarpaulin stoppers * Service door at front * 2 x 3 LED in the door crossbeam * Smartboard German trailer! German papers! NEW VEHICLE! Notice regarding possible listing errors: Despite careful preparation of this listing, occasional errors in the text or details cannot be excluded. We do not assume liability for mistakes, changes or interim sales. All information is supplied without guarantee. Please contact us to verify details or for further questions.

Condition: new, maximum load weight: 29,710 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,610 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, New vehicle – available for purchase, rental, or lease with a purchase option upon agreement! STAS 60 m³ moving floor trailer with Cargo Floor and remote control – Also for rent! ---- * Manufacturer: Stas * Model: Farmstar * First registration: – (new vehicle) * Color: Superstructure RAL 9007 Grey Aluminium, Chassis RAL 9005 Black, Tarp Black * Volume: 60 m³ (approx. 10.61m long x 2.475m wide x 2.30m high) * Gross weight: 39,000kg (technical) / 36,000kg (permitted) * Unladen weight (vehicle registration): 6,290 kg * Payload: 29,710 kg * Axles: 3x Jost axles / 1st axle lift axle / starting aid / disc brakes * Tyres: 385/65R 22.5 NEW on Speedline Diamond aluminium rims * Suspension: Pneumatic suspension with raise/lower function * EBS Wabco * CARGO FLOOR CF 500 SL-C with remote control * 21-board floor system with additional plastic inserts beneath the floor profiles * Stainless steel end caps for flooring * 6 mm ribbed floor * Moving bulkhead with stainless steel handles * Control box rear left * Operator platform with access ladders front right and left * Hydraulic connections at the front with 3m hoses (also with possible connection to the landing legs) * Pressure 1" female * Return 1" female * Swing door (50/50) with 2 locking rods and 1 pneumatic lock * Side walls smooth finish inside and outside (grain spec), fully welded Cgjdpoyz H S Aefx Ad Net * Roll tarp (680g/m²) with central locking * 3 cross beams * Individual mudguards * Full load supports * Tool box rear right * Shovel and broom holder left * Smartboard * TPMS tire pressure monitoring system * Aluminium ladder right * Extendable ladder rear right * Aluminium impact buffers rear * One-piece foldable aluminium sheet for rear light protection * 2x LED work lights (left + right) * 2x LED reversing lights rear * 2 x 3 LEDs in the door closing crossbeam New vehicle – immediately available! Available for rent, purchase, or lease with a purchase option upon agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional mistakes may occur in the text or information provided. We assume no liability for errors, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or to clarify any further questions.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2019, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,160 mm, color: grey, Year of construction: 2019, Axle configuration Tyre size: 385/65R22.5 Axle brand: JOST Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Rear axle 2: Max. axle load: 9,000 kg; Left tyre tread: 80%; Right tyre tread: 80% Rear axle 3: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Weights Unladen weight: 7,440 kg Payload: 34,560 kg Csdpfx Adex Trmij Nsgt Gross vehicle weight (GVW): 42,000 kg Maintenance APK (roadworthiness inspection): valid until 09/2026 Identification Registration number: OR-26-YP Further information Please contact Bob Beukers for more information.

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply. Cjdox R Ambopfx Ad Nogt

Condition: used, axle configuration: 3 axles, first registration: 05/2017, loading space length: 8,600 mm, loading space width: 2,360 mm, loading space height: 1,520 mm, total length: 9,600 mm, total width: 2,600 mm, total height: 3,600 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) = Notes = Number of axles: 3, Unladen weight: 6,680 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2017, Body material: Steel, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 30, Drum volume measurement: m³, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tire tread: 7 mm; Right tire tread: 6 mm Axle 2: Left tire tread: 9 mm; Right tire tread: 7 mm Axle 3: Left tire tread: 15 mm; Right tire tread: 15 mm Weights Unladen weight: 6,680 kg Payload: 32,320 kg Gross vehicle weight: 39,000 kg Environment Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Easy! • Large and rapidly changing inventory • Recognizable quality • Competitive pricing • Reliable business practices • Multilingual staff • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognized quality' Csdpfx Adsydvdxo Nogt • And more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your lease rate and submit an inquiry via our website. Ask us directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 01/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tyre size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; left tyre tread: 1 mm; right tyre tread: 2 mm Rear axle 2: Alloy rims; left tyre tread: 10 mm; right tyre tread: 5 mm Rear axle 3: Alloy rims; left tyre tread: 3 mm; right tyre tread: 4 mm Codpfxjyyh Hxe Ad Nsgt Weights Unladen weight: 10,000 kg Payload: 28,000 kg Gross vehicle weight: 38,000 kg Condition Damage: none

Year of construction: 2023, condition: excellent (used), Invoice: I issue a VAT invoice Brand: unbranded Cgedpfsy Amumex Ad Not Type: hydraulic pump Model: Type- CBL 50-200/200 Manufacturer code: 2 Packaging condition: no packaging

Condition: used, axle configuration: 3 axles, first registration: 04/2007, loading space length: 7,600 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, suspension: air, tire size: 385/65r22,5, wheelbase: 1,250 mm, Year of construction: 2007, Tyre size: 385/65r22,5 Suspension: air suspension Cgjdpfx Adsyx Dgxs Nst Drive: Wheel Empty weight: 5.300 kg Carrying capacity: 33.700 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Csdpfxeyzulwj Ad Negt Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar Codeyycwrepfx Ad Nsgt ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) Csdpfeyycwljx Ad Nsgt - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm