Used Stas 50 Cub Cereal for sale (39,544)

Condition: used, axle configuration: 3 axles, first registration: 01/2010, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2010, Axle configuration Tyre size: 385/65 R22.5 Axle make: Mercedes-Benz Brakes: disc brakes Suspension: air suspension Lhjdpfx Ajy At Hvskyjf Rear axle 1: alloy rims; tyre tread left: 5 mm; tyre tread right: 3 mm Rear axle 2: alloy rims; tyre tread left: 5 mm; tyre tread right: 5 mm Rear axle 3: alloy rims; tyre tread left: 2 mm; tyre tread right: 4 mm Weights Unladen weight: 6,370 kg Payload: 32,630 kg Gross vehicle weight: 39,000 kg Condition Damage: none

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Lodpfx Akeyy Hakeyohf Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators below body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Lhsdpfx Aeyxb E Eskysf Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 34,928 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm "AGRAR-LINER" Lsdpfxoyv T Sxj Akyjhf First registered January 16, 2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,280 mm (conical design) Empty weight only 7,072 kg Z-chassis cranked design Floor throughout in 4 mm HardoX steel HB450 Front wall and side walls 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing combination doors with pendulum function, pneumatic post-release 2 pieces GRAIN SHIFT with 1x dust protection bag Roof roll tarpaulin reinforced design HYVA tipping ram type Alpha, suitable for high and low pressure - ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with anti-skid protection RSS WABCO Smartboard Lifting and lowering device Tires 385/65 R 22.5 Aluminum stepladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Lhsdpfxjxriu Es Akyef Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured in self-supporting ALU (aluminum) construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Ledpfofakkcsx Akyjhf Axles and Suspension "Disc Brake 22.5": Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake lining wear indicator (BVA) for display in the tractor unit (without tractor head equipment), 1st and 3rd axle separately liftable with drive-off aid (without tractor head equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, brand as per manufacturer’s choice, Alcoa aluminum rims DuraBright 11.75x22.5 ET 120, king pin bolted into a 10 mm thick plate Landing Legs: Aluminum drop landing legs, 2 x 10 tons support load, pivot feet used for air suspension Brake System: According to E.G. standard, dual-circuit brake system, EBS E-system Wabco with RSS system (Roll Stability Support), spring-actuated parking brake active on two axles, operated at the rear, aluminum air reservoir system, premium modulator Electrical System: According to STVZO guidelines, with 2 LED five-chamber taillights type Aspöck Europoint LED integrated in ALU rear end, 24 V system with 1x 5-pin & 2x 7-pin sockets, with LED side marker lights, 2 separate LED work lights at the rear, 2 LED work lights at 1st landing leg height, 1 inside left front LED work light, operable from outside Body/Bodywork "Fully Welded Inside Construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, fully welded with lower and upper flange, inside fully welded plank profiles, floor as moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, special angled ALU corner profiles, smooth flat rear wall with 2 ALU swing doors 50/30 mm thick, 4 locking rods with welded-in ALU rear frame mounted in Teflon and stainless steel bearings, continuous ALU wall suspended from reinforced ALU top rail with "Kevlar tarpaulin" for complete emptying, lateral brush seals and additional Kevlar side tarpaulin, integrated discharge funnel with hinged floor closure flap, operable from outside left rear, inspection window rear left, 1 sample slide per rear door (2 pcs.), service door front left Hydraulic System: "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 670 PE-HD sliding blocks, approx. 6 mm floor thickness, hydraulic stroke approx. 200 mm, fixed end at front wall, separate hydraulic line connection under the vehicle with fixed halves, line size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electric operation rear left with cable remote in lockable waterproof box Accessories: PVC mudguards with rubber splash guards, ALU spare wheel holder, foldable side ALU underrun protection, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 gr./m2 quality with rolling tarp system incl. side ...

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Ljdpfx Asxf Spfskyehf Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Lhedpsxf Sn Iefx Akysf Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Ledpfx Akjyh S Aisyohf Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Lhodofi Nmwepfx Akyof Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change Lsdpjfi Nmpjfx Akyjhf

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Lhedpfx Akogcw Rijysf manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: good (used), mileage: 374,947 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,680 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 5,830 mm, loading space width: 2,480 mm, loading space height: 2,110 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed (mounted) - Halogen lamp - Hydraulic system - Manual Ljdpfx Aexmrqlskyjhf - PTO (power take-off) - Pump - Radio/cassette - Sleeper cab - Lane departure warning - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 9,445 kg, Gross weight: 19,500 kg, Total tank capacity: 780 liters, Trailer hitch, Kingpin diameter: 40 DIN, Fifth-wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning, Air conditioning, Heated seats, Bluetooth, Warning lights, Engine output: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Gearbox: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO (power take-off), PTO type: 1, Starter battery, Number of sides: 1 side, Pump, Central locking, Seating configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/65R22.5; Steered; Tyre tread left: 14 mm; Tyre tread right: 12 mm; Suspension: leaf spring Axle 2: Tyre size: 315/80R22.5; Double wheels; Tyre tread left inner: 13 mm; Tyre tread left outer: 14 mm; Tyre tread right inner: 11 mm; Tyre tread right outer: 12 mm; Suspension: air suspension Weights Kerb weight: 9,445 kg Payload: 10,055 kg Gross vehicle weight (GVW): 19,500 kg Functional Platform height: 153 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €677 per month (default, 60 months); Please ask for more information and terms Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealerships for used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large and fast-changing stock • Recognizable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • Guaranteed recognizable quality • And much more.... Please visit our website for special offers and a complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Lhsdogcw Rmjpfx Akyof Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Year of construction: 2016, operating hours: 20,000 h, condition: used, functionality: fully functional, Vertical stainless steel tank 50 m³ with jacket. Diameter 3 m, cylinder length 6.3 m, cone 2.4 m. Wall thickness 6 mm at the base and 8 mm at the cone. Jacket wall thickness 5 mm. Steel grade: 12Х18Н10т. Ljdpfx Aoyxx Anekyehf

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: Ljdpfoymautox Akyjhf - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM Ledpfsqy E Rlox Akyohf overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: used, This listing is for a Pall Allegro 50 L Standard Mixer and Weigh Platform. The unit is in full working condition and is ready for immediate release. The Pall Allegro 50 L Standard Mixer and Weigh Platform is a robust and versatile solution designed for single-use bioprocessing applications in the pharmaceutical and biotechnology industries. Engineered for consistent mixing performance, this system supports critical upstream and downstream operations including buffer preparation, media mixing, and formulation processes. This platform integrates high-precision weighing functionality with a reliable mixing system, offering enhanced process control in a compact, easy-to-clean stainless steel frame. Its compatibility with Pall Allegro single-use mixers ensures operational flexibility and sterility assurance across various applications. Key Features Integrated Design – Combines mixing and weighing in one streamlined system. Single-Use Compatible – Fully compatible with Pall Allegro 2D mixer bags. High Accuracy Weighing – Precision load cells for reliable mass control and batch documentation. Ledexl Dpdopfx Akyohf User-Friendly Interface – Easy-to-use control panel with adjustable speed and mixing profiles. Hygienic Construction – Stainless steel frame with smooth surfaces for GMP compliance. Scalable Solution – Ideal for pilot-scale to small-scale commercial production. Technical Specifications Model: Allegro 50 L Standard Mixer & Weigh Platform Mixing Volume: Up to 50 liters Mixer Type: Magnetically driven impeller Platform Material: 304 Stainless Steel Weight Capacity: Up to 100 kg Dimensions (approx.): 600 mm x 600 mm x 1100 mm Power Supply: 100–240 V AC / 50–60 Hz Control System: Integrated touch screen interface Manufacturer: Pall Corporation Applications Biopharmaceutical Manufacturing – Media and buffer prep, formulation, and hold steps. Clinical Manufacturing – Flexible use in small-scale GMP operations. Vaccine Production – Sterile formulation and component mixing. Gene & Cell Therapy – Supports sterile, closed-system processing. Process Development Labs – Ideal for scaling up single-use technologies. Benefits Sterile Processing – Supports single-use bags to minimize contamination risk. Compact Footprint – Fits easily into lab and production environments. Accurate Dosing – Integrated weigh system for precise process control. Reduced Cleaning Time – No need for CIP/SIP due to disposable mixer bags. Pall Quality – Developed by a trusted leader in bioprocessing technologies.

Condition: used, 2 cylinder standing agitator tank made of stainless steel, used Contents: 50 cbm Order number: 3810 Material: 1.4401 in contact with product 1.4301 otherwise Inside weld seams ground to be food safe Dimensions: 3,000 mm internal diameter 3,100 mm external diameter 7,000 mm cylinder height 350 mm upper base 500 mm lower base 400 mm ground clearance 8,250 mm approx. total height Design: cylindrical standing on frame with conical bases Propeller agitator installed at an angle in the cylinder, 12 kW, 980 rpm. Double jacket on the cylinder, 2 circuits approx. 14 sqm, 76 liters each and on the lower floor, 1 circuit, approx. 5 sqm, 90 liters Operating overpressure 2 bar Insulation 50 mm PU foam around cylinder, upper floor and frame, stainless steel cover Lhodpfxev Dthwe Akyof with manufacturer's certificate and material certificates Connections: 1 manhole 340 x 440 mm in the cylinder Ventilation Ø 300 with spray head in the upper floor Outlet bottom center DN 65 extended Weight: approx. 6.5 tons

Year of construction: 1994, condition: used, - Year: 1994 - Documentation available: Yes - CE certificate present: No - Serial number: 40640000 - Control: Conventional Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ljdpfx Akswnhl Royehf Lukas van Rossum

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data Lhedpfxjxrc Dts Akyef 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: new, Ostas 3 rolls round bending machine SMR-S 1070 x 150 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1070 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1070 mm smallest diameter 225 mm roll diameter 150 mm weight 1400 kg dimension L-W-H 2600 x 630 x 1020 mm motor 4,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device Ledpeiw D Ecefx Akyjhf asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Ljdpfxexrdcds Akyshf Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) All bending capacities are based on a yield strength of 250 N/mm2 Ljdeyaqmajpfx Akyohf Material: (ST 37 – ST 42 structural steel)

Condition: new, sheet width 1050 mm Lsdjfv H Dgopfx Akyohf plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.