Used Traub Tk 42 for sale (5,764)

Condition: excellent (used), Year of construction: 2015, operating hours: 28,520 h, functionality: fully functional, machine/vehicle number: 6050500, Equipment: documentation/manual, Special equipment: - Air cooler - X-axes with glass scales - FMB Minimac 20 loading magazine with accessories - 2 channels for the loading magazine with feed rods - Accessories for converting from long turning to short turning Lasdozr E D Njpfx Acfof - The machine is collision-free. - The coolant system is included as an accessory. - The second turret has been modified with a reinforced motor for the powered tools from Traub. - The air supply for cooling has been expanded with an air cooler. - Regular maintenance performed by Traub.

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Ledpfozr Uvhox Acfoaf Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, machine/vehicle number: 5737, Year of construction: 1991, operating hours: 6,587 h, Erstzulassung Lodpfx Aozru Ececfeaf Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle AngabenErstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: used, machine/vehicle number: 5737, Year of construction: 1991, operating hours: 6,587 h, Erstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle AngabenErstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben Laedpfx Acjzcbngsfsf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2006, serial no. 1191 Description: Lsdpfszrk I Hox Acfsaf Y-axis on S1, V-axis, 2 x C-axis, 2 x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, Hydrafeed Multifeed bar feeder magazine. Condition: Very well maintained, good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered on – or a video is available. Delivery time: approx. 4 weeks from order.

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Lasdpfx Acozr Dd Uofef Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: good (used), Year of construction: 1986, functionality: fully functional, 1 x Multi-spindle lathe Lajdpfxszq Dm Tj Acfof Traub TD 26 Year of manufacture: 1986 + Loading magazine Iemca AS 325/32 Year of manufacture: 1986 Equipment: 6-station star-shaped turret Central lubrication Chip conveyor Accessories: Complete set of change gears for individual workpiece machining Complete documentation for the machine and loading magazine The machine can be inspected while powered on, or a video can be sent.

Condition: used, Year of construction: 1995, Technical details: Lajdpfx Aozn N R Ejcfjf turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Max turning diamater 15 mm Ledpfx Acoyy Nz Rsfeaf

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder Laodpfxszpf I Ao Acfjf -Complete documentation Errors and omissions excepted.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 Lodpfezacwdox Acfsaf - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: ready for operation (used), Heidenhain AE LB 382C scanning head. 315420-04, serial number 59 151 559V, used, in good condition, in original packaging, 100% functional. Scope of delivery as shown in the photos. Lsdpjzm D Ddofx Acfeaf

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. The following defects were already known prior to the current failure: Ledpfezd Udijx Acfjaf Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects.

Condition: excellent (used), CNC machine Traub TNL 26 Condition used, in good condition Laodpfx Ashlp Sdecfsf Sale to the exclusion of any warranty

Condition: used, 🧰 Product Features • Manufacturer: Palflex • Condition: used • Color: orange • Height: 400 cm Lasdpfx Ajvfnqvocfef • Depth: 110 cm • Field load: 24000 kg • Beam length: 410 cm • Beam load capacity: 3000 kg per level Offer includes: • 11 units of pre-assembled frames, depth 110 cm, height 4 m • 40 units of beams, length 4.1 m, 3000 kg load capacity/bay • 80 units of locking devices • 44 units of concrete anchors • 1 unit of load capacity sign per row of shelving Used corner protectors are immediately available, surcharge per unit: €15.00 net! Further accessories can be found in the accessories catalog. 💰 Price: €2,790.00 net, excluding VAT. • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We have over 5000 linear meters of pallet racking in stock from numerous manufacturers. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a comprehensive all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission auction: Conducting auctions on behalf of customers. Our full service through our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning center TNA480, TX8D, year of manufacture 1990, serial number >550. C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, hollow cylinder chuck, 3-jaw chuck KNCS315. Good condition, ready for operation. Laedpfx Ajzcdgfocfjf Machine geometry has been checked and corrected/adjusted. Scrapers and belts have been inspected, replaced, maintenance performed after 4000 operating hours. The photos were taken in the production environment; the machine will be cleaned and inspected further. The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2001, TNK 36, year of manufacture 2001 including chip conveyor, Resy filtration system In good condition, operated without loader, not under power Laodexv Sr Ijpfx Acfof

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4BM geared motor with a 0.37 kW three-phase motor and an integrated 220 V AC electromagnetic brake. The unit is fully functional, tested, and ready for use. The geared motor is in good technical and visual condition. Normal signs of wear and tear resulting from use are visible. Ljdpfx Aoznnm Socfsaf Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4BM Motor power: 0.37 kW Power supply: 3×220Δ / 380Y V, 50 Hz Motor speed: 1380 rpm Output speed: 42 rpm Torque: 60 Nm Brake: 220 V AC Braking torque: 5 Nm Protection class: IP54 Insulation class: B Weight: 16.88 kg Mounting position: IM V1A Year of manufacture: 2002 Country of manufacture: Germany

Condition: ready for operation (used), Year of construction: 2002, operating hours: 147,007 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, bar diameter (max.): 36 mm, controller manufacturer: TRAUB, controller model: TX8i (64-bit), workpiece diameter (max.): 32 mm, number of slots in tool magazine: 22, number of axes: 10, This 10-axis TRAUB TNK 36 horizontal turning machine was manufactured in 2002. It features a main spindle speed of 6,300 rpm and a counter spindle speed of 6,300 rpm. The machine includes a maximum workpiece diameter of 32 mm and a coolant tank capacity of approximately 360 liters. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 machine we have for sale. Contact us for further details. • 14" flat screen • Additional V24 RS232 interface in the electrical cabinet • MDE interface in the electrical cabinet (machine status and parts counter) • Rigid tapping without compensation chuck • Polyform function for C-axis • Tool monitoring • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Main spindle C-axis • Motorized counter spindle • Counter spindle bore: 32 mm • Counter spindle speed: 6,300 rpm • Counter spindle Z-axis travel: 250 mm • Counter spindle Z-axis rapid traverse: 30 m/min • Counter spindle C-axis • Counter clamping pressure device • Workpiece ejector • Increased feed force • Hainbuch Axfix chuck • X2 travel: 50 mm • Y2 travel: ±20 mm • Z2 travel: 100 mm • X2 rapid traverse: 15 m/min • Y2 rapid traverse: 15 m/min • Z2 rapid traverse: 15 m/min • 12 driven tools (via central drive) • Driven tool speed: 6,000 rpm • Electronic gearbox • X3 travel: 370 mm • Z3 travel: 250 mm • X3 rapid traverse: 30–60 m/min • Z3 rapid traverse: 30 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Increased feed force • X4 travel: 73 mm • Y4 travel: ±50 mm • X4 rapid traverse: 15 m/min • Y4 rapid traverse: 15 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Left-hand workpiece conveyor • Pneumatic workpiece gripper • Gripper jaws: Ø5–8 mm / Ø8–20 mm / Ø20–36 mm • Maximum workpiece length: 200 mm • Maximum workpiece diameter: 32 mm • RESY compact belt filter • Cooling unit • Coolant tank capacity: approx. 360 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Through-tool coolant: 30 bar • Coolant gun • Connected load: 22 kW Optional equipment, not included: • KNOLL 240S-1/100 hinged belt chip conveyor (discharge height: 950 mm) • Bar feeder preparation (guide tubes Ø25 / Ø36) • Rotating workpiece stop (16 × 16 mm shank) • Brankamp CMS 100 collision monitoring (main and counter spindle) • FMB Turbo 5-42 XT / 3200 "C" bar feeder • Basic set of static and driven tool holders included Technical Specification Ljdozl S Emspfx Acfoaf Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Laedpfx Acex A Hl Aofof

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. Lodpjt Hwq Dofx Acfeaf CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW Laodpfowp D Nbox Acfjf tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Quantity: 1 piece available -Dimensions: 325/130/H135 mm Laodpfxed R Ikdo Acfsf -Weight: 7.3 kg

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, triple hydraulic pump -Type: ZZ EP 0012 / 32 AP 0168 / TK11/11/6SF -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 2x pumps available -Price: per piece -Dimensions: 320/90/H115 mm Lajdovvinqepfx Acfsf -Weight: 9.1 kg/piece

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: TK, double hydraulic pump -Type: 22TK6/6S / 22 I 0004 -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 3x pumps available -Price: per piece Laedpfx Acovvrz Hsfsf -Dimensions: 215/88/H110 mm -Weight: 5.8 kg/piece