Used Vacon / Danfoss Nxp01055 for sale (202)

Condition: excellent (used), Item: D-9134-Danfoss Inverter VLT Diverse Frequency Inverter Danfoss Type VLT Iiodpfx Aehcpv Somgeh Diverse types 2010/2020/2030/2060 Speed drivers Information at attached photos with number.

Year of construction: 2001, condition: good (used), Electric motor Manufacturer: Danfoss Year of manufacture: 2001 Type: WF-DA90LT-H FCM 315 Type 12 Motor number: J369521 Power: 1.5 kW Speed: 1,500 rpm Speed control range: 150 to 3,000 rpm Shaft diameter: .... mm Diameter of attachment gear: 40 mm Isdpfx Amohgbtvegjih Shaft length: mm Attachment diameter: 140 mm Bolt circle diameter for clamping screws: 110 mm Controller Weight: 22 kg Dimensions: 340 x 240 x 180 mm Several motors available

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,193 h, functionality: fully functional, machine/vehicle number: 71, total length: 13,000 mm, total width: 5,700 mm, total height: 4,300 mm, overall weight: 35,000 kg, hopper volume: 5,000 l, rotational speed (max.): 45 rpm, rotational speed (min.): 45 rpm, power: 404.52 kW (549.99 HP), year of last overhaul: 2024, The machine is immediately available + a second set of shafts is included!!! If interested, please contact us by phone or email. Inspection is possible! -In July 2024, new hydraulic pumps and motors were installed at 3014 operating hours. The complete hydraulic system was converted from Danfoss to Bosch, including an additional oil cooler. Currently: 1179 hours of operation with the new pumps. The cost of the conversion was €67,000. Iiedpsz Rmwmofx Amgoh Service: Kurz GmbH (at 2516 operating hours) Service: Engine oil + filter & fuel filter (July 31, 2024, at 3111 operating hours) Service: Engine oil + filter & fuel filter (May 8, 2025, at 3772 operating hours) Service: Engine oil + filter & fuel filter (November 6, 2025, at 4106 operating hours) -Taken out of service on March 27, 2026. -Operating hours in March 2026: 4193 hours. -A second set of shafts is included.

Condition: ready for operation (used), Danfoss OMR 200 151-0214 hydraulic motor, used, in good condition, 100% functional, scope of delivery as per photos. Isdpfey Nn Nljx Amgeih

Condition: ready for operation (used), Danfoss Variable Speed Drive VLT 103 frequency inverter 175B5037 SN: 021804G165,used, good condition, 100% working, scope of delivery as per photos Iijdpetyr Acofx Amgjh

Condition: new, Three-phase motor Manufacturer: Danfoss Type: VCM 330/M21 R1 L 2T 192 H 1514 400 Volts 3 kW 6.4 Amps 3000 rpm Equipped with frequency inverter Danfoss 0 - 7560 rpm Unused, in opened original packaging Iijdpfexughzsx Amgeh Transport dimensions: Length: 350 mm Width: 195 mm Height: 270 mm Weight: 29.5 kg

Condition: ready for operation (used), Refrigeration Compressor, Danfoss Refrigeration Compressor,Cooler compressor Iedpfxow H Tgis Amgeih Manufacturer : Danfoss Type : SM185s4rc Overall dimensions : 317 x 678 mm Brand new Refrigerant: Freon Capacity at +10 °C / +40 °C: 57 kW Capacity at 0 °C / +40 °C: 40 kW Capacity at -5 °C / +40 °C: 33 kW Capacity at -10 °C / +40 °C: 27 kW Capacity at -20 °C / +40 °C: 17 kW Note: R404a – R22 or other Freon types

Condition: ready for operation (used), Danfoss VLT 3032 Variable Speed Drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Iedpfxoi D Unuo Amgsih

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general Iiedpfx Aszba Nyemgeh The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: ready for operation (used), Vacon NXI00725A5T0CSSA1AF00000 frequency inverter SN: 14479088 – Control unit type: CPASA1AF00000 / Power unit type: PA007255T0CSV, used, in good condition, fully functional, delivery as per photos. Iiedpfx Amsz Adgkogeh

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar Ijdpfx Amoywuzwogeih - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1976, For sale is an open-type NH3 reciprocating compressor, Stal-Astra (STAL Refrigeration) type UD 43, manufactured in 1976, offered as a complete unit with a directly coupled 90 kW three-phase motor, Dutchi DM-IP23 250M4 (1470 rpm, 400/690 V, IP23). The unit operated until 07/2026 in our chilled water system (food production, Hamburg) at evaporation temperatures of approximately -5 to -10 °C and is being sold due to a changeover to a chilled water system. Condition: functional, regularly maintained by Johnson Controls (York/Stal). Last inspection of safety devices (DBA/SDBK) on August 15, 2025, with maintenance certificate. Motor has a lubrication schedule plate and was overhauled by Elmorep. Installed: oil pump with sight glass, oil pressure switch Johnson Controls, Danfoss pressure switch, HD pressure gauge R717, suction-side pressure vessel Stal-Astra TAU 4 (22 bar, 25 l, manufactured in 1976). Scope of supply: compressor, motor, base frame, coupling with protective cover, installed fittings. Without control cabinet and control system. The refrigerant will be professionally evacuated before delivery, and the unit will be purged with nitrogen. Inspection by appointment. A horizontal NH3 shell-and-tube evaporator can be sold with it if desired, but it has a known micro-leak in the tube bundle. Iiedoz Rlwfopfx Amgeh

Condition: used, Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat -Manufacturer: Danfoss, pressure switch unused in original packaging -Type: KP 17B Item number: 060-1268 -Control range: -0.2 - 7.5 bar -Quantity: 1x pressure switch available -Price per piece -Dimensions box: 130/140/H50 mm Iijdpfx Aoqlgukomgjh -Weight: 0.5 kg

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. Iisdpfx Amjz Iy Hzogjh 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: new, Sauer Danfoss 111.25.171.0A SNP3NN/033LN01FA P1F6F5NNNN/NNNNN gear pump, unused, 100% functional, scope of delivery as shown in the photos. Iodpfx Aozh Sb Hjmgjih

Condition: used, Year of construction: 2017, gearing type: other, first registration: 01/2017, color: black, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Available: 5 units! Sauer-Danfoss SPV2/089-R6Z-PS183-CXX-B1 mixing hydraulic pump! Includes mounting frame, filter, and cooler from Agro-Hytos! Direct mounting to the engine PTO! Iiodpfokt Nkgjx Amgoh Removed from a Daimler-Benz Arocs 3343 S 6x4 with rear engine PTO, flange 100, 650 Nm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA SN: 1, unused, 100% functional, scope of delivery as shown in the photos. Iiodpfx Ajzirpmemgeh

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA, unused, 100% functional, scope of delivery as shown in the photos. Isdpszh Sbysfx Amgsih

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation drive FC 302 FC-302P7K5T5E20H1XGXXXXSXXXXAXBXCXXXXDX Isdpfx Amjhukxuogoih (P7K5) 7.5 KW / 10 HP, three Phasen 380 - 500 VAC, (E20) IP20 / Chassis

Condition: new, Frequency converter Iiedohukxxepfx Amgjh Manufacturer: Danfoss FC-302P2K2T5E20H1XGXXXXSXXXXAXBXCXXXXDX Typ: VLT® AutomationDrive FC-302 (P2K2) 2.2 KW / 3.0 HP, Three phase 380 - 500 VAC, (E20) IP20 / Chassis

Condition: excellent (used), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece Iiodpfxelc Uh Ee Amgoh -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm Iisdpfxowldups Amgeh -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. Iisdezudabjpfx Amgeh • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Iodpfx Ajzzz N Homgsih Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Iedpfoyb Rpdjx Amgjih The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.