Used Vacon / Danfoss Nxp01055 for sale (185)

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A Ledpelpi Tqofx Acfeaf -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm Lajdpfx Acog N Tuzsfof -Center distance: 70 mm -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 87 kW (118.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 781 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, heating capacity: 93.3 kW (126.85 HP), AIRCOOLED CHILLER/HEAT PUMP CARRIER 30RQ 090RAPI1984 87 KW/93.3 KW Cooling capacity: 87.0 kW / 24.74 tons (12/7 — 35°C) Heating capacity: 93.3 kW / 26.53 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125, expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 781 kg Working hours: 0/0 h. Condition: New Lajdpfx Ajzldz Tocfef CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2020, functionality: fully functional, cooling capacity: 81.1 kW (110.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 464 kg, input voltage: 400 V, total width: 1,090 mm, total length: 2,110 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 080R PI1889 81.1 KW Cooling capacity: 81.1 kW / 23.06 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Recuperation Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF175A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (Frequency inverter) Dimensions: 2.11x1.09x1.33 m Weight: 464 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Lsdpezldu Hjfx Acfjaf The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, mileage: 730,552 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - PTO (Power Take-Off) - Radio/multimedia system - Warning beacon - Disc brakes - Sliding sunroof - Sleeper cab - Seat heating - Sun visor - Lane departure warning system - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal reference number for customer inquiries: 4-264 MAN TGX 26.500 6x4 Short Log Truck Complete with TajfunLiv 150Z 9.6 Loading Crane. Vehicle Description: Truck: Ledpfx Ajylnpcscfjaf MAN TGX 26.500 6X4 BL, wheelbase 4500 mm Engine: D2676LF51 - 500 HP / 368 kW, EURO 6 SCR - 2500 Nm, C-R OBD-C Transmission software for off-road use (TipMatic OFFROAD) ZF 12 TX 2821 OD MAN TipMatic gearbox with ZF Intarder PTO 2 NA NTX/10 without flange f=0.96 top and NTX/10 with flange f=1.31 bottom Parking brake with pneumatic application of the front axle brakes Cab with medium-height high roof "XLX", 2440 mm wide, 2280 mm long Equipment packages Comfort Package 1 Driver MAN Media Package Navigation Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment, and heating Additional air heater EBERSPÄCHER D4S Air conditioning AC R134A CFC-free with automatic temperature control 1 sleeper bunk with storage (aluminum frame) Mattress for lower sleeper bunk Radio MAN Media Truck Advanced 12V with 7" display and navigation preparation Navigation SD EUROPE FULL "Comfort" hands-free functionality for 2 mobile phones (supports MFL and Bluetooth®) Body: OptiPa bolster body 4 ExTe D5 bolsters with 8 ExTe aluminum telescopic stakes Robust steel front wall Access on passenger side Access box on driver side Toolbox on passenger side Two snow chain holders New tire cover tarpaulin Crane: TajfunLIV 150Z 9.6 TAJFUN LIV fully hydraulic timber loading crane Classification according to EN12999 Declaration of conformity CE version Color: black Reach 9.60 m (double extension), lifting moment 141 kNm Internal hoses in telescopic sections Slewing gear Slewing range 425° Control block PARKER H170CF Telescopic stabilizers Support legs swiveling upwards to 45° Rigid stabilizer pads Support leg control with electrohydraulic Danfoss PVG 32 valve Dead center above cab Dual circuit system Toggle lever on lifting cylinder Lifting cylinder guard Operating hours counter Spotlight on knuckle arm Spare parts catalog and user manual in German Continuous rotator 10 t Seat heating LED work lights Inclination switch Start / Stop function - Linear lever control (4+2) - Grapple GO53x This offer is non-binding. Subject to prior sale, errors, and changes. General Information Cab: Long-distance traffic Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Gross vehicle weight: 26,000 kg Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65-22.5; steered; suspension: leaf spring Rear axle 1: Tyre size: 315/80-22.5; differential lock; suspension: air suspension...

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control system - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - DAB radio - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air horn - Particulate filter - PTO (power take-off) - Radio/multimedia system - Beacon light - Reversing camera - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Pre-heating system - Toolbox - Windshield Internal reference for customer inquiries: Reference vehicle -> 3-150 MAN TGX 33.520 6x4 BLS with FASSI F485RA.2.28 xe-dynamic loader crane Loader crane and body: F 485RA.2.28 xe-dynamic Endless slewing range All hydraulic cylinders double-acting Double linkage system with PROLINK FASSI stability control system FSC incl. LMB II Radio remote control, Fassi V7S remote with maxi-6 linear levers and color display FL system (full lift) selectable fast extension valve Max. outreach 20.95 m with 1,325 kg lifting capacity (optionally extendable to 24.95 m) Electronic overload protection system with FX900 Danfoss D850 control valve Work lights Control unit for additional function: winch / xe-dynamic Laodpeylxrzsfx Acfsf PAVIC compact tractor unit crane body Ball-and-socket bearing on superstructure for optional separate ballast platform use (ballast platform 3600 x 2480 x 800 mm approx. €14,500 net) Vehicle: MAN TGX 33.520 6x4 BL tractor unit Max. permissible gross train weight 73,000 kg Engine D2676LF78 - 520 HP EURO 6e - 2650 Nm C -R OBD-D MAN TipMatic 12.28 OD with retarder 35 MAN TipMatic performance driving mode up to 70,000 kg Extension MAN TipMatic driving program, 70,000 kg to 90,000 kg, heavy haulage MAN TipMatic off-road driving program up to 70,000 kg Hypoid rear axle HYD-1370/HY-1350 Differential lock on rear axles Fuel tank 370l right side and 60l AdBlue Drive 6x4 Wheelbase 3300+1350 mm Suspension leaf/air ECAS air suspension system Rear frame overhang 750 mm Trailer coupling ROCKINGER 400G150A Trailer coupling for drawbar trailer (conversion ex works) Fifth wheel JOST JSK 37 C, mounting height 185 mm, with integrated lubrication Kingpin offset 1125 mm Fifth wheel plate 40 mm, manufacturer JOST (kingpin load up to 36 t) GM cab: the spacious one (wide, long, medium height) Electric glass sunroof MAN EasyControl panel, 2 functions, operable from outside with door open Driver comfort seat, air-sprung with lumbar support, shoulder adjustment, and heating 2 bunk beds Fully retractable cool box under bunk Storage compartment on rear cab wall with gooseneck lamp and control module MAN Media System Navigation Professional 12.3-inch MAN SmartSelect infotainment control with touchpad and direct access buttons Smartphone integration Lane departure warning (LDW) Digital axle load display (ALM) in cab for air-suspended axles and much more. Financing / hire purchase, as well as leasing /...

Condition: good (used), Drawbar head, control unit, steering system, steering unit, steering control unit, steering orbitrol -Manufacturer: Toyota, Steering control unit with steering system for forklift trucks -Steering control unit: Danfoss OSPC 100 ON 150N1066 steering orbitrol -Dimensions: see photos Laodpfjzg U Hcex Acfjf -Price/Fee: complete -Transport dimensions: 620/370/H355 mm -Weight: 16.5 kg

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels Ljdpjzhma Dofx Acfeaf - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: reconditioned (used), We offer a CARNITECH screw conveyor with feeding hopper – an industrial set designed for conveying, feeding and dosing raw material in food processing plants. The system is suitable for production lines where stable, controlled and efficient product feeding to further processing machines is required. The set consists of a feeding hopper and a screw conveyor, often referred to as an inclined screw feeder. This solution allows the product to be conveniently loaded into the hopper and then smoothly transported to the next stage of the process, for example to a mixer, grinder, bowl cutter, separator, forming machine, packaging machine or other production equipment. The CARNITECH screw conveyor and hopper are equipped with motors of 4 kW and 2.2 kW, ensuring efficient operation even in demanding production conditions. The control system is equipped with frequency inverters from renowned brands Fuji and Danfoss, allowing smooth speed adjustment and adaptation of the machine operation to the type of raw material and the capacity of the entire line. A major advantage of the system is the possibility of smooth speed regulation and reverse operation, meaning the direction of rotation can be changed. This gives the operator better control over the feeding process, helps reduce the risk of blockages and allows the machine to be adjusted to current production needs. The safety system is designed using components from the well-known and respected company Pilz, which increases operator safety during daily operation. The system can be used as a standalone conveying unit or as part of a larger technological line in meat, poultry, fish processing plants and convenience food production. Technical data: Manufacturer: CARNITECH Lodpfx Acjzi U H Ujfoaf Type: screw conveyor with feeding hopper Set components: screw conveyor / inclined screw feeder + feeding hopper Motor power: 4 kW and 2.2 kW Control: system with frequency inverters Frequency inverters: Fuji and Danfoss Speed regulation: smooth Reverse operation: yes Safety system: Pilz components Application: conveying, feeding and dosing of raw material Main advantages: stable feeding of raw material to the production line set consisting of a feeding hopper and screw conveyor 4 kW and 2.2 kW motors smooth speed adjustment possibility of reverse operation frequency inverters from Fuji and Danfoss safety system based on Pilz components efficient operation in demanding production conditions possibility of integration with other food processing machines solid industrial construction solution for automation of raw material transport

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N Lasdpfsk Sgwaex Acfef 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Year of construction: 2026, condition: new, functionality: fully functional, ECS-EC-1000-12-VF EDDY CURRENT SEPARATOR Magnetism: 12-POLE MAGNETISM D500X1280MM ECCENTRIC DRUM NEODYMIUM MAGNETISM Laedpfxjzmntve Acfof MAGNETIC FIELD INTENSITY OF 2950 GAUSS ON THE SURFACE OF THE ECCENTRIC DRUM MAGNETIC INTENSITY OF 2215 GAUSS OVER THE BELT Conveyor: 1000MM EFFECTIVE BELT WIDTH AGM3 EL 132 M2 B5 5.5KW 3000RPM ELECTRIC MOTOR (GAMAK) 4MM PVC BELT 40MM WAVE BELT LINING 5MM RUBBER LINING ANTI-SLIP BELT APPLICATION Panel: 3-PHASE 380V 50HZ POWER SUPPLY PANASONIC PLC CONTROL 7'' TOUCH SCREEN MAGNETIC DRUM, BELT SPEED ADJUSTABLE WITH DANFOSS DRIVER TOTAL POWER 9KW

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control 1 LED work light mounted on the knuckle arm Lodpfx Aszcr N Iocfjaf 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Lodpfozcr N Uox Acfjaf Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Ledpfozcr Nzex Acfjaf Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 364 kW (494.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,100 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,450 mm, total height: 2,420 mm, warranty duration: 12 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YCPB 420 364 kW/406 kW Cooling capacity: 364 kW / 103.5 tons (12/7 — 35°C) Heating capacity: 406 kW / 115.44 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss PSH105A4EPA (scroll) + 2 pcs. Danfoss PSH065A4EPA (scroll) Type of refrigerant: R454B Number of fans: 7 pcs. (Frequency inverter) Ledpfx Acoy Rknmofsaf Dimensions: 4.45x2.25x2.42 m. Weight: 3100 kg. Working hours: 107/80/98/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,203 kg, input voltage: 400 V, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 12 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Lodsx Rbw Eopfx Acfoaf - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 12 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Lodpfx Ajy H Dhlecfsaf Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Lasdpfszbhi Ijx Acfef Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Ljdpfxszba Nys Acfeaf Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-260009, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,200 mm. This CNC-controlled Voortman VB 1050 bandsaw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle. For recommissioning, a new safety system must be procured and implemented in accordance with the local conditions (hardware & software; not included in the scope of delivery!). Ledjyr Hp Ispfx Acfsaf

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-240014, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,200 mm. This CNC-controlled Voortman VB 1050 bandsaw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle. Lodoyr Hqrjpfx Acfjaf For recommissioning, a new safety system must be procured and implemented in accordance with the local conditions (hardware & software; not included in the scope of delivery!).

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Ledpfx Acedzqn Djfoaf Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Lajdpfsvw A T Nex Acfsf Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 32.3 kW (43.92 HP), type of input current: three-phase, type of cooling: air, overall weight: 394 kg, input voltage: 400 V, total width: 1,250 mm, total length: 1,060 mm, total height: 1,800 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE 32,3 KW Cooling capacity: 32,3 / 9,2 tons kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 1 pcs. Type of refrigerant: R-407C Compressors: 1 pcs. Danfoss (scroll) Heat exchanger: Plate Hydraulic module: water pump, buffer tank, expansion vessel Number of fans: 1 pcs. Dimensions: 1.06 x 1.25 x 1.80 m Weight: 394 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Lodey U Uyzspfx Acfoaf Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), em: D-8061-Flowmeter-Siemens/Danfoss MAG1100 F, Digital MAGFLO Flow meter Type MAG 6000 Transmitter with touch display. Laodpjirfbwsfx Acfef Secondhand size DN15 (1/2") Max. flow: 20m3/h Max. Press: 20 Bar/290 psi Max. Temperature: 130 c/166 f Min. Temperature: -30 c/-22 f Year 2012 Input 60 V max 0.125 A For more informations please contact us! From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar