Used Veb Khz 250 for sale (10,513)

Condition: used, Year of construction: 1987, table length 1000 mm table width 1000 mm table load 1,5 t flange diameter 700 mm turning speed max. 0,04 U/min weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m Iodpfetqqkujx Anweau

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth Iajdpjy Tiuqsfx Anweu - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Iedey Rnr Aopfx Anwoau Other common battery sizes available on request. Transport possible.

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Iasdpfx Anoy St Skswju Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Ijdpfx Ajy Ra D Djnweau Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: used, Year of construction: 2014, The hydraulic gantry press is designed for bending or straightening as well as processing finished welded components, and for dismantling assemblies of mining machinery and other equipment. It is used in mechanical workshops, production plants, repair shops, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25,000 kg Table surface: 4200 mm x 2140 mm Gantry cylinder diameter 1: 2 x 300 mm Gantry cylinder diameter 2: 2 x 250 mm Gantry 1 cylinder pressing force: 2 x 1768 kN Gantry 2 cylinder pressing force: 2 x 1228 kN Maximum clearance: 1240 mm Iasdpfehktq Aox Anwou Working cylinder stroke: 600-660 mm Gantry travel: 1420 mm Equipment: - two gantries - table - working cylinders x 4 - gantry travel cylinder - working cylinder travel cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, due for inspection.

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Iasdpoy Ittgjfx Anwju

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Iaedpoywcq Tjfx Anwju Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Iedpfx Aoy H Ic Hsnwsau Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Year of construction: 1977, condition: good (used), 2 pieces DDR emergency power generators Engine manufacturer: VEB SKL Magdeburg GDR Type: 8NVD26 A2 year of construction: 1977 continuous power: 294 kW max. line: 323 kW displacement: 52,96 liters compression ratio: 14 engine speed: 750 rpm specific fuel consumption: 224 g/kwh fuel consumption in 8 hours:640 liters boost pressure ratio: 1.38 charge air temperature after supercharger: 60°C Iaedpfx Aoigyt Henwju Generator: Manufacturer: VEM Dessau Type SSED 509-8a voltage 400 volt electrical power: 330 kVA cos. F: 0,8 Dimensions: Length 4270 mm, width 1516 mm, height 2030 mm. Total weight approx. 8500 kg per piece !! Further information exclusively by telephone !!!

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control Iaodpfxsy Ec Ems Anweu - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Iaodoy D Rk Iopfx Anwju Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Iaodpsvzkylofx Anwju Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: good (used), Tool and cutter grinder VEB model SW200 Isdpfxequtclj Anweau

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Iedpfxowi Tide Anwjau Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: good (used), Item: D-2139-Vaccum Pump-DVI100 Vacuum Pump DVI100, Iodpfxjh A Hcvo Anwjau capacity 100 m3, working condition!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 2,000 kg, number of shelf rows: 10, shelf height: 7,500 mm, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) Iasdpfx Aev Uqwdenwsu - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), machine/vehicle number: 251, Output speed: 31.5 rpm output power: 0,37 kW electrical connection: 220/380 V space requirement: 200 x 200 x 490 mm weight: 15 kg Iodpfed Avb Dsx Anweau with encoder HEIDENHAIN

Condition: excellent (used), machine/vehicle number: 043700 001 7, Output speed: 31.5 rpm nominal power: 0,37 kW electrical connection: 220/380 V, 1,9/1,1 kW space requirement: 200 x 200 x 490 mm weight: 15 kg with encoder HEIDENHAIN Iasdod Avbxepfx Anweu

Condition: used, machine/vehicle number: 12400, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 25 mm, spindle mount: MK 4, drilling depth: 120 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 590 mm, total length: 700 mm, total height: 2,050 mm, throat depth: 315 mm, table width: 590 mm, table length: 700 mm, overall weight: 1,000 kg, VEB BK 25 AI Column Drilling Machine – Robust Industrial Version For sale is a stable and durable column drilling machine, model BK 25 AI, manufactured by VEB Werkzeugmaschinenfabrik Saalfeld (GDR). This machine features a heavy-duty cast iron design, making it ideal for use in workshops, mechanical engineering, maintenance, or training facilities. The machine provides a drilling capacity of up to 25 mm in steel and is equipped with an MK4 spindle taper. It offers a total of 12 mechanical speed settings, ensuring high torque and optimal adjustment for various materials. The quill stroke is 120 mm, with a throat depth of 315 mm. The generous worktable (700 × 590 mm) with T-slots offers versatile clamping options. Both drill head and table are adjustable, allowing for flexible operation. Power is supplied by a 2.4 kW motor (380 V, 3-phase, 50 Hz). The spindle speeds range from 63 to 1000 rpm. Technical Highlights: • Drilling capacity in steel: 25 mm • Spindle taper: MK4 • Speed range: 63 – 1000 rpm • 12 mechanical speed settings • Quill stroke: 120 mm • Throat depth: 315 mm • Table size: 700 × 590 mm • Total weight: approx. 1000 kg • Connection: 380 V / 3-phase Equipment: • Height-adjustable worktable • Mechanical speed selection Ijdpeyw Rpwefx Anwsau • Solid cast iron construction • Industrial-grade design • Made in Germany (GDR) The machine is in good used condition and ready for immediate operation. Inspection under power is possible.

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm Iaodpsw Rnf Ijfx Anwou - Total height of the ribbed plate approx. 185 mm - Subframe - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1985, Offer 25995 Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material Ijdpfx Aewp Egusnwsau - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Iedeytirnjpfx Anweau Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, power capacity / kW volt / V ampere / A Make: VEB Type: MFDr132.3-F02 - TGL39434 Power: 0.24 / 12.8 / 20.2 kW Rotation: 20 / 5000 / 3300 / 1650 rpm 39 / 400 / 400V incl. fan Ijdpfx Aoyn R Sfenwjau Weight: 180kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 5028830, Offer 26070 Technical Data: - Max. load capacity in horizontal position: 7500 kg - Faceplate dimensions: 1500 x 1500 mm - Motorized tilting of the faceplate: 0 – 120° Iaodpfeyrfxbsx Anweu - Rotational movement electrically adjustable, stepless: 0.0028 – 1.04 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V x 25 kW - Table height in horizontal position: approx. 1600 mm - Handheld remote control - Required space approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg