Used Victor Taichung Vturn 36 for sale (4,503)

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction - turning table - manual and automatic mode - Pre selection of bending angle 3 piece - 2 sideholders - with foot pedal for left and right bending Technical Details: Bwodpfx Ajdibzvef Hsn bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Bodpfxorfclqe Af Hswn Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: used, Technical details: diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg Bodsu Nlihopfx Af Hown EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar *

Condition: used, Technical details: feed pressure: 60 bar Bwodpfxsu N Eris Af Hsn drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric - Number of clamps: 3 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Voltage: 400V Bjdpfx Aewyb T Eef Hswn - Power: 22 kW - Weight: 358 kg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min Bwodey Tyyqspfx Af Hon power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 110 mm, 36 pieces -Sizes: Ø 5 to 60.5 mm, see photos -Price/Fee: complete -Transport dimensions: 700/450/H110 mm Bwjdpey Tlhaefx Af Hon -Weight: 42 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Edge folding machine with stop Programmable for up to 20 edge folds. Bwsdpfxsy Uh Uxs Af Hjn

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, empty load weight: 14,445 kg, maximum load weight: 22,555 kg, overall weight: 36,000 kg, tire size: 385/65R22,5, axle configuration: > 3 axles, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, truck registration, | MAN TGS 35.480 Schwing Stetter 10m³ Drum Mixer | Smartcontrol with internal controls | Wheel arrangement: 8x4 leaf suspension | Egel, drum lifting device | Automatic transmission, engine exhaust brake, emergency brake assist, ACC | Austrian registration with a maximum permissible total weight of 36,000 kg | Tires: 1-A/2-A: 385/65 R22.5 3-A/4-A: 315/80R22.5, construction site tread | Air conditioning, radio, Bluetooth | Differential lock | Rearview camera | Subject to errors, typos, and prior sale. Bwsdjwyuitspfx Af Hon

Condition: used, empty load weight: 11,860 kg, maximum load weight: 22,140 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/2008, next inspection (TÜV): 07/2026, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle liftable, last axle steering, ABS (anti-lock braking system), catwalk, side underrun protection, supports, storage box, rotating beacon, rear discharge. Superstructure: Suction and pressure tank semi-trailer with 1 compartment approx. 26,000 l with ADR (FL/AT), 3x 9t BPW axles, disc brakes, 1st axle liftable, 3rd axle steered! Next tank inspection: 07/2026! Leakage and functional test valid until 07/2029! Bwodpfx Aoy Twmbof Hjn Accessory information without guarantee. Subject to change, prior sale and errors excepted!

Condition: excellent (used), power: 18 kW (24.47 HP), fuel type: diesel, Year of construction: 2026, operating hours: 4 h, Year of manufacture: 2026 Model year: 2026 Drive: Track GVW: 3.900 kg CE mark: yes Technical condition: very good Bodpfx Afsy Smzfj Hewn Visual appearance: very good Damages: none

Condition: excellent (used), Year of construction: 2022, Lead spindle mechanism and safety device to prevent tool breakage. Program for single and continuous cycles. Electronically controlled motor braking for single cycles. Digital speed and depth display with programmable thread depth. Part counter. Threading capacity from M5 to M30. Threads per hour: 800. Normal drilling capacity: 35 mm. Spindle: MK 4. Thread depth: 90 mm. Bwjdpfxjy Sxtms Af Hen Drilling depth: 160 mm. Overhang: 300 mm, table surface: 550 × 400 mm, overall height: 2105 mm. Weight: 385 kg. 2 machines available.

Condition: new, functionality: fully functional, overall weight: 2,741 kg, empty load weight: 2,741 kg, operation weight: 2,741 kg, Year of construction: 2026, HYDRAULIC HAMMER SHB155 The STEELITE medium-class hydraulic hammers stand out with their high impact energy, robust construction, and reliable performance in daily site operations. Ideally suited for demolition, civil engineering, road construction, and recycling work, they offer an optimal combination of striking power, efficiency, and durability. The sound- and vibration-dampened design ensures high operator comfort with minimal stress on the carrier machine. Benefit from excellent spare parts availability and a 1-year warranty for maximum safety and cost-effectiveness. YOUR ADVANTAGES AT A GLANCE - 1-year warranty - Outstanding value for money - High impact force in a compact design - Excellent spare parts supply - Multiple mounting options - Ready for immediate use SCOPE OF DELIVERY - SHB155 hydraulic hammer - 1 x moil (pointed chisel) - 1/2" hydraulic hoses with metal abrasion guard - Accessory box - Operating manual (German) - CE Declaration of Conformity TECHNICAL DATA - Weight: 2,741 kg - Oil flow rate: 150–210 l/min Bodpfjy St N Nex Af Hjwn - Max operating pressure: 250 bar - Tool diameter: 155 mm - Automatic lubrication system - Device cushioning - Suitable for carriers: 27–36 t Advantages of STEELITE Hydraulic Hammers - High breaking performance with smooth operation - Efficient power transmission for cost-effective work - Long service life and low maintenance costs - Robust construction for maximum operational safety - Optimal balance of power, weight, and durability

Condition: used, maximum load weight: 23,520 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 04/2017, next inspection (TÜV): 04/2017, Equipment: ABS, Manufacturer De Buf Model BM 12-36-2SPR m/ bånd Theam TSR15 Year 2017 Condition Good Bedpfxowbmm Tj Af Hewn Serial Number YA9BM36217G222922 Ref. nr. 7813 Reg. date: 28-04-2017 Drum brake: ? ABS: ? Tire Size: 425/65R22 Cover% left 40 - 40% Suspension rear: Air Toolbox: ? Total weight: 36000 kg. Net weight: 12480 kg. Manufacturer: The Buf BM 12-36-2SPR Tank capacity: 12000 liters.

Condition: excellent (used), Cold gasifier for the storage of cryogenic gases (including argon, helium, hydrogen, nitrogen and oxygen). These are 15 vacuum-insulated, double-walled pressure vessels. Manufacturer: Messer Griesheim Model: ST 36 Volume: 3.557 ltr. Operating overpressure: 18 bar / outside vacuum Test pressure: 24,7 bar Operating temperature: -196°C Material: 1.5662 (steel) Dimensions: Bwsdpfx Afepgf Rqs Hsn Height: 3,500 mm Diameter (inside): 1.300 mm Diameter (outside): 1,800 mm Empty weight: 2.700 kg Incl. complete technical pressure vessel documentation

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m Bwjdpfxex Rz Dxo Af Hon - Weight 350kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 Bwodpfx Afoy Swfze Hen - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: good (used), Reasaw Stenner Type:Stenner VHM 36 Saw line including lifting tables ,infeeding conveyor, reasaw Stenner 36,outfeeding conveyor 7m Toatal lengt approx. 12 m Tech. info: Reasaw Stenner Bandsaw wheel 36´(900mm) Bodpfx Afjqzh Nws Hswn Saw blade width 75, 90, 100mm Fence to saw blade 250mm Feed roll to saw blade 250mm Max cutting hight 400mm Motor 15 Hp, 400 volt, 50 Hz, 3 phase Hydraulic lifting table: Brand: Hymo Capacity: 4000 kg Work table size: 3500x1400 mm Hydraulic lifting table size:1200x900mm Input conveyor: Length: 4200 mm Width of roller: 500 mm Outfeed belt conveyor 8000mm Stock no:2001941BXM

Condition: ready for operation (used), Siemens 6SC6000-0NA00 FGB control E Stand K SN HO.44745-BIL 36, used, minor signs of wear, 100% functional, scope of delivery as per photos Bjdpfx Afsxagynj Hswn

Condition: used, Year of construction: 2005, turning diameter 5-42 mm turning length 3200 mm Bedsy Nd U Dspfx Af Hewn control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg

Condition: used, machine/vehicle number: 13348, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Further information 1st axle rigid, 2nd + 3rd axle hydr. positively steered with saddle deflection wedge, 1 pair of hydr. support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, steel riffle plate complete, air: red-yellow + electrics: 1x 7-pin Length of gooseneck approx.: 4,380 mm Length drop deck approx.: 11,300 mm Bedsi Riyzopfx Af Hswn Saddle height approx.: 1,200 mm

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of manufacture: 2006 Bwsdjy Smf Dopfx Af Hsn injection unit: metering volume: 36ccm Clamping unit: clamping force: 36 t ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Grundig CNC 36 / 44216-007.00 monitor for Deckel Maho FP4-60, used, in good condition, 100% functional, scope of delivery as per photos. Bwedpfx Afsy Nqayo Hon

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Bwedpfx Aei Eblaof Hjn

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 8 kg, warranty duration: 24 months, type of input current: DC, feed length X-axis: 3,400 mm, space requirement length: 3,700 mm, welding current (max.): 3 A, power: 0.072 kW (0.10 HP), Equipment: CE marking, documentation/manual, Pedante is an automatic digital length stop for miter and compound miter saws. It is designed for workshops where many parts are cut to the same length or where cutting lengths change frequently. The length is entered on the touchscreen, after which the stop automatically moves to the set position. This significantly reduces manual measuring and adjustment. Bwsdpjy R Si Eefx Af Hen The system is suitable for joinery shops, furniture production, window and door manufacturers, as well as aluminum and PVC profile processing. The stop can be mounted on either the left or right side of the saw, supports millimeters and decimal inches, and automatically monitors its position during operation. Depending on the required working length, several models are available from 1,040 mm to 5,760 mm; prices range from €1,290 to €2,490 excl. VAT.