Used Visiontec Füll- Und Etiketteninspektion Fill Level Inspector (2017) for sale (25,222)

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, power: 75 kW (101.97 HP), filter area: 481.7 m², total height: 7,400 mm, total length: 9,800 mm, total width: 2,450 mm, Equipment: CE marking, documentation/manual, Dust and wood chip extraction filter. Predpfx Aotzld Uomxob

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Prsdpoz D S Sbsfx Amxjb Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2020, Coordinate grinding machine Hauser 3 SM, year of manufacture 1996 Predpfx Ajzc Eihomxjb Surface grinding machine Okamoto, year of manufacture 1996 Cylindrical grinding machine Weiss W11, year of manufacture 2009

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Prjdpfjzdc D Sjx Amxsb Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309a, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Pjdpoz Db S Rsfx Amxerb

Condition: used, Approximately 225 used gauge pins from various manufacturers, applicable for measuring/testing bores to determine maximum and minimum dimensions, with a good side and a reject side. 1-piece. Includes, among others, thread gauge pins made of tool steel, DIN 7162, H7, H6, H5 for measuring length, diameter, and bore. Manufacturers: Saliger, Hommel, HK, Blome, and FerTer. Price upon request. All technical specifications are subject to typographical errors and inaccuracies. Sales exclusively to countries within the EU. Podpfx Aszz I Txemxorb

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Podpfxjvdiduo Amxsrb Europe-wide delivery possible.

Year of construction: 2014, condition: good (used), Load capacity: 2000 kg Pedpfx Amsy Uurwjxjrb Width: 3850 mm Height: 400 mm Depth: 130 mm Weight: 5,9 kg Condition: good, second-hand

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table Podetzmifepfx Amxjrb -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components. Prsdpfx Aozzkrwsmxsb

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Pedjz Hcbropfx Amxorb Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The bidirectional constant current source is designed for battery cycling and can apply or measure voltages from 0 to 20 V and apply or measure currents up to 3 A. The constant current source can operate as a current source (positive current) or as a load (negative current). LAN and USB are available as interfaces. The device was supplied with various additional functions. The NGM-K103 Digital Trigger I/O option enables the connection of the device to external measuring devices, and the NGM-K104 DVM option enables the use of an independent digital voltmeter. With the NGM-K106 Battery Simulation option, the constant current source can simulate the currents and voltages of a battery. Bidirectional power supply, max. voltage 20 V, max. current 3 A, 60 W power, interfaces: LAN and USB, available options: NGM-K103 Digital Trigger I/O, NGM-K104 DVM option, NGM-K106 Battery Simulation Includes power cable, USB cable. Prsdpeytrnfefx Amxjb

Condition: used, functionality: fully functional, machine/vehicle number: W41164H00047, Year of construction: 2017, operating hours: 134 h, load capacity: 1,200 kg, lifting height: 2,430 mm, fuel type: electric, mast type: duplex, construction height: 2,260 mm, empty load weight: 1,440 kg, drive type: Elektro, High-lift pallet truck Chassis number: W41164H00047 Mast type: Duplex Condition: Ready for use and fully operational Technical condition: very good Battery year: 2017 Description: Linde D12 No.: R0607 Operating hours: 134 The unit is in very good optical and technical condition. Charger available on request. Fast and straightforward transport can be arranged upon agreement. This listing serves only for the identification of the machine! A detailed condition report and possible equipment specifications are provided individually upon request. Errors and prior sale excepted. Sale only to commercial buyers. Every sale of used equipment is made under exclusion of any warranty or guarantee. If you have not found the right machine, please contact us. We have a wide selection of other equipment available on site. Initial lift, Prodpfoxfcv Aox Amxjb

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Psdpfjynkh Tex Amxerb

Year of construction: 2024, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Prsdoz Hax Uepfx Amxeb Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Approx. 111 Corlettes, Cordes und Koch, width 1.30 / 2m / 2.40m – used – : Prices per unit ex location (net): Type 1 + 2 (2m wide): only €99 each Type 3 (1.30m wide): only €69 each Type 4 (2.40m wide): only €99 each For complete purchase (preferred): €8,950 (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Collapsible Not stackable Depth: 1.15m Type 1 – approx. 70 units Width: approx. 2m Height: approx. 1.80m Prsdpfoyhxlqox Amxsb Type 2 – approx. 32 units Width: approx. 2m Height: approx. 1.92m Type 3 – approx. 6 units Width: approx. 1.30m Height: approx. 1.80m Type 4 – approx. 3 units Width: approx. 2.40m Height: approx. 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, workpiece weight (max.): 50 kg, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. Prsdpfxszzwx Ds Amxob The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: good (used), Approx. 113 Corletten units, widths 1.10m / 2m / 2.70m - used: Prices per unit, ex warehouse (net): Type 1 – stackable: €79.00 Type 1 – non-stackable: €59.00 Type 2 – stackable: €79.00 Type 2 – non-stackable: €59.00 Type 3 – stackable: €65.00 Type 3 – non-stackable: €49.00 Manufacturer: Cordes und Koch Type: unknown, various Year of manufacture: unknown, various Type 1: “Large variant” with dimensions 2.70m x 1.15m (width x depth) 25 units in red – almost all stackable 10 units in blue – non-stackable 2 units in green – non-stackable Type 2: approx. 24 units are stackable “Medium variant” with dimensions 2.00m x 1.15m (width x depth) 27 units in blue, 16 of which have a grating 12 units in green Type 3: at least 10 units are stackable “Small variant” with dimensions 1.10m x 1.15m (width x depth) 34 units in green Pjdpfx Aoz Dtzqsmxsrb 3 units in yellow Condition: used Available: immediately Location: 63128 Dietzenbach

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Material: V4A stainless steel Prjdpfszty H Iex Amxeb Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Sawdust silo with a filtration system. Psdpfx Amsy Uzhloxsrb

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Electronic connection value: 1.5 kW Prsdpfxox Uz A Ao Amxob 400 V/50 Hz Width: 2000 mm Height: 1650 mm Depth: 1000 mm Weight approx. 120 kg

Condition: used, Year of construction: 2026, functionality: fully functional, load capacity: 1,500 kg, construction width: 1,200 mm, Rotating device Load center: 500 Pjdpfx Amjzhp Dfexjrb ISO class: ISO Class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotating device, 205 degrees, for complete emptying of all containers, load capacity 1500 kg, support arm permanently mounted/foldable, incl. hoses & quick couplings, available from stock.

Condition: refurbished (used), Year of construction: 1992, punching force: 40 t, Mubea / Muhr and Bender MIW 400: - hydraulic profile/bar shear with hole punch and notcher - Punching force 40 tons - Activation via foot switch - Quick-change device for hole punch - completely overhauled Punches up to: Ø 30 in 10 mm Ø 20 in 15 mm Pjdpfx Ajrynzgemxorb Cuts up to: Round: Ø30 Square: 28 x 28 mm Angle: 80 x 8 mm Flat steel: 100 x 15 mm / 150 x 10 mm Special tools and fixtures on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: excellent (used), functionality: fully functional, Capacity 1000 x 3.5 mm - 55 strokes/min - electric foot switch - left side stop 600 mm, two supports of 600 mm each - central lubrication - Ortlinghaus brake-clutch combination - switchable between high-hold position and tilting roller table Pjdpfx Amszhgplexsrb - rear safety by light curtain

Condition: used, Year of construction: 1997, Micoflow insulator - Glovebox Glovebox insulator The device is unused. Predpfx Amevw I Npoxjb with microfilter extraction unit type 112108614A36, flow rate 1870 m³/h with 2 airlocks (for feeding and discharging work materials) Inlet/outlet size: W:400 x D:260 x H:430 mm ilumination 2x glove ports Castors (appliance can be moved) Front panel made of polycarbonate Interior dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W: 2100 x D: 850 x H: 2100 mm Weight: approx. 400 kg *