Used Vitella Fhs 600 for sale (11,554)

Condition: excellent (used), GEA OptiCoater 600 batter enrober. Top specification enrober available for immediate sale. Njdpjv Su Inefx Aa Ielc

Condition: good (used), Wanson steam generator from meat factory which closed in 2016. 698 Kw. Further details are on the plates shown in the photographs. Nsdpsi Uli Eefx Aa Ijlc

Condition: excellent (used), Frigo GYRoCOMPACT 600 Classic spiral freezer, 34 tiers. Had only run for 14,000 hours when the factory closed. Beautiful condition. North South configuration. 34 tiers, 80mm tier height so perfect for burgers, sausages, chicken nuggets, fish fingers, spring rolls, hash browns etc. Nljdpfxjwztmaj Aa Iec

Condition: excellent (used), GEA CFS OptiCoater 600 batter enrober available for immediate sale. Nsdpex Hak Nofx Aa Ielc

Condition: excellent (used), 600mm GEA WetCoater 600 batter enrober. Lovely condition. Can be supplied with other 600mm coating machines. Perfect for chicken nugget/burger line or crumbed fish line. Njdjx Hamdepfx Aa Ielc

Condition: like new (used), As brand new GEA WetCoater 600. Nodpfxoyivrgj Aa Islc

Condition: good (used), 600mm MultiFormer direct from meat-free factory, fitted with optional BridgeBreaker. Other 600mm machines available from same line. Nlodpfx Asv H D N Dsa Ijc

Year of construction: 1998, condition: like new (used), GEA WetCoater 600 batter enrober. 600mm wide weir type batter enrober. Njdpfjigru Djx Aa Islc

Condition: excellent (used), WetCoater 600 in lovely condition. Uprated model with HD heavy duty pump. Njdpfxsx Hbfhe Aa Ielc

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Nlodpfx Asx Altfja Ijc Please note that the photos probably show two different ovens, both are very similar.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints Nljdszg Tzfopfx Aa Ijc - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: Nljdpfszg Ty Ijx Aa Isc - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2018, operating hours: 9,500 h, lifting height: 4,370 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, power: 25 kW (33.99 HP), motor manufacturer: Linde, battery capacity: 850 Ah, fork length: 2,400 mm, Weights Empty weight: 8.700 kg Battery Battery: 850 Ah, Year of manufacture 2020 Functional Lifting capacity: 5.000 kg Maximum passing height: 230 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Condition Technical condition: good Visual appearance: good Nlsdpfszgribex Aa Isc Other information Fork type: Vorkenversteller Fork carriage: Positioner and spread Latest inspection: 2026-03-03 Charger make: Linde Charger current: 850 Production country: NL Additional information Please contact Martyn Joosse for more information = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Roof window - Super elastic tyres

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Nsdpfezg Tlwox Aa Ielc Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Drive: 4 kW Nedpfxszg Tivj Aa Iolc Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog Nledpfx Aaex R Uw Sj Iec * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2006, turning diameter 600 mm Nodpoy I A Utefx Aa Islc turning length 1250 mm control Siemens 840D radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m 1 pc. steadyrest 20 - 150 mm 1 pc. steadyrest 50 - 200 mm

Condition: used, Year of construction: 1997, machine/vehicle number: 219, table length: 1,750 mm, table width: 700 mm, input voltage: 400 V, Degen UTB 600 E deep-drilling machine with a separate control cabinet and work table with T-slots. Nlodpfx Aaezgg Ixj Ioc Specifications: Brand: Degen (Willy Degen) Type: UTB 600 E Machine No.: 219 Year of construction: 1997 Electrical data: 400 V, 50 Hz, 19 A, 11.2 kVA Table dimensions: 175 x 70 cm Note: Made in Germany Design: Machine with bed/table, column with bellows guard, separate control cabinet Condition: Used

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, table width: 465 mm, table length: 800 mm, table load: 500 kg, overall weight: 6,700 kg, Details: Brand: HERMLE Model: C 600 V X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Table dimensions: approx. 800x465 mm Max. table load: 500 kg Equipped with a tool magazine with 30 positions Spindle connection: SK40 Machine weight: approx. 6700 kg Design: enclosed machine housing with viewing windows and double access doors Control system: Heidenhain Accessories: Knoll 340K-1 chip conveyor, year of manufacture 2000 Nsdpfx Aezggldja Iolc 400 Volt Condition: used

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Njdpfezdtkhjx Aa Ielc Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 4,477 h, load capacity: 2,500 kg, lifting height: 3,250 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,354 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: Good Battery voltage: 80V Battery capacity: 700Ah Njdpfxjy N E Hhs Aa Ielc Battery type: PzS Description: Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, full cabin, joystick, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 181 h, load capacity: 4,500 kg, lifting height: 4,675 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, drive type: Elektro, Electric four-wheel forklift Nsdpfx Aey N E Huja Islc Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2023 Fork positioner, fork adjustment device, compliant with STVZO (German Road Traffic Licensing Regulations), full free lift, LED lights, seat.

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm table size Y: 600 mm max. workpiece size X: 1040 mm max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Dielectric system with cooling Nedpfx Ajym Rr Nja Ielc Suitable for tool and mold making

Condition: used, Year of construction: 2002, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA Nljdovtfn Iopfx Aa Ioc

Condition: good (used), Year of construction: 2019, operating hours: 7,650 h, load capacity: 2,000 kg, lifting height: 4,649 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 triplex 465 Freelift / Sideshift / Fork positioner 2019 VW Diesel 7,650 hours Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Nedpfxoy Rqflo Aa Iolc Bedrijfsstraat 3 5391 LR Nuland