Used Volpato 7/25 for sale (38,601)

Condition: new, Year of construction: 2025, ABB IRB1200-7/0.9 NEW!!With Omnicore C30 controller 09.2025 ABB warranty untill have 2 robots on stock. DEVELOPMENT OF GSG ROBOTICS Gujdsxq Tugopfx Ahvsc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 11,032 h, load capacity: 300 kg, fuel type: electric, construction height: 1,820 mm, drive type: Elektro, tractive force with load: 25,000 N, construction width: 1,300 mm, Tractor Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 6.50-10 Rear tires Type: Superelastic Rear tires Size: 7.00-12 Guedpeu Ha S Esfx Ahvec Battery Volt: 80V Battery Ah: 930Ah Battery Manufacturer: SBS Battery type: PzS Battery year of construction: 2020 Description: In addition to this device, we offer other forklifts and warehouse equipment. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles. Front work lights, heating, full cab, CE certificate, special construction, exterior mirrors, windshield wipers, single pedal, seat,

Condition: excellent (used), functionality: fully functional, power: 140 kW (190.35 HP), Year of construction: 2021, operating hours: 7,212 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, Hitachi ZX 250LCN-7 Year of manufacture: 2021 Operating hours: 7,212 h CW40 quick coupler with various options Gusdpfxjy U E Hre Ahvoc For more information, please inquire!!

Condition: used, machine/vehicle number: 008347, Max. panel width: 1200 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 50 Kg Guedpjyngzpsfx Ahvjc Work capacity: 16 Cycles/min Movement system: suction cups.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,131 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,525 mm, fork carriage width: 1,150 mm, fork length: 1,350 mm, empty load weight: 4,494 kg, drive type: Diesel, Diesel forklift Load center: 600 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Super elastic Godpfx Ahoyw U Anevouc Front tire size: 23x9-10 Rear tire type: Super elastic Rear tire size: 21x8-9 Description: In addition to this unit, we offer a range of other forklifts and warehouse equipment. All our machines are workshop-inspected and FEM4.004 certified. Please contact us by email or phone. You can also find us under hsr-gabelstapler. Of course, we also buy your used equipment, even if you are not purchasing a vehicle from us. Leasing and financing at attractive conditions are available upon request. We are happy to advise you in detail and professionally regarding our vehicles. Side shifter, fork positioner, 1350/2350 mm, 3rd valve, 4th valve, rear work light, front work light, heater, particulate filter, full cab, interior mirror, joystick, beacon, windshield wiper, single pedal, LED, seat,

Condition: used, mileage: 510,310 km, power: 552 kW (750.51 HP), first registration: 08/2018, fuel type: diesel, empty load weight: 14,235 kg, maximum load weight: 11,765 kg, overall weight: 26,000 kg, axle configuration: 6x4, fuel consumption (urban): 875 l/100km, color: black, driver cabin: other, gearing type: automatic, suspension: air, number of seats: 2, total length: 8,750 mm, lifting height: 3,800 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, parking heater, Body manufacturer: VDL, unladen weight: 14235 kg, permissible total weight: 26000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 315/80 R22.5, leather seats, interior color: black, air suspension, tilting hydraulics, digital tachograph, automatic climate control, adaptive cruise control, driver's seat with air suspension, seat heating, level adjustment, radio, power steering, adjustable steering column, electric windows, exterior temperature display, electric exterior mirrors, wide-angle mirrors, central locking, underride guard, sun visor, central lubrication system, cooler box, daytime running lights, connection plug 1x15-pin, cup holder, insulated cab, information and service system, speed limiter, wide tires, emergency braking assistant, storage compartment, trailer brake connection (pneumatic), non-binding offer, subject to errors and prior sale. The image may not match the offered tipper body. Body type: VDL S-25-5900, year of manufacture: 03.2018. Guedpfx Aey T T Dcehvoc

Condition: used, Year of construction: 2004, Technical details: lifting capacity: 1,0 t span width: 7170 mm Arm length: Säule - Kranhaken: 7.000 mm height lower edge cantilever arm: ca. 1.550 mm column diameter: Ø 400 mm rotation: +/- 100 ° total power requirement: 1,1 kW weight: ges. ca. 1450 kg travel of hook: ca. 5000 mm Classification H2, B3 Hoist Star Liftket 1.0 to type 071/53; lifting speed 5/1.25 m/min; load chain/round link chain DIN 5684-0 7.2x21 - 2/1; manual trolley travel; travel distance hoist 5,600 mm, Gsdpfxsu Nvnue Ahvjuc External control, Hubhöhe 2 m Boom length: 7,300 mm Column height 1,950 mm Column base plate Ø 915 mm with 16x Ø 30 mm holes distributed around the circumference incl. 15 foot clamping screws incl. KIPP pneumatic push rod tensioner i.D. *

Condition: good (used), mileage: 745,372 km, power: 346 kW (470.43 HP), first registration: 03/2018, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 9,120 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, soot filter, spoiler, trailer coupling, General information Cab: Globetrotter Guodoy Sz Adepfx Ahvjc Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Transmission Transmission: Volvo i Shift, 12 gears, Automatic Axle configuration Make axles: Volvo Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tyre size: 385 / 65 / R22.5; Lift axle; Max. axle load: 7500 kg; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Weights Empty weight: 13.000 kg Carrying capacity: 15.000 kg GVW: 28.000 kg Functional Crane: VDL S-25-6600, year of manufacture 2018, behind the cab Interior Interior: grey Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 09/2026 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Coupling - Heavy duty engine brake - Low-noise - Particulate filter - Power take-off (PTO) - Radio - Radio, MP3 enabled - Refrigirator - Remote central locking - Reversing camera - Side skirts - Speed limiter - Spoilers - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: excellent (used), power: 371 kW (504.42 HP), overall weight: 32,000 kg, Year of construction: 2007, operating hours: 26,259 h, KOMATSU HD325-7 year: 2007 operation hours: 26.259 hrs. ROPS Radio Back drive camera Airco Central lubrication body heating body condition: approx 60–70% good tyres size 18.00R33 approx 80% good CE / EPA Engine with 371 kW Guedpfx Ajyybt Sshvec operation weight: 32 to.

Condition: used, machine/vehicle number: IC1351, Year of construction: 2014, operating hours: 2,995 h, load capacity: 2,500 kg, lifting height: 4,590 mm, load center: 500 mm, construction height: 2,925 mm, enginetype: Diesel, manufacturer: Still Guedey Tg Alepfx Ahvec

Condition: used, Year of construction: 2014, operating hours: 11,220 h, fuel type: electric, total height: 1,950 mm, total length: 3,550 mm, total width: 1,320 mm, color: grey, Empty weight: 3.900 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 51X127E00319 - Operating hours: 11220 - Towing capacity: 25000kg - Number of wheels: 4 Wheels - Options: Full cabin - Drive: Electric - Brand/Type: PzS 465 - Battery year of construction: 2014 - Capacity: 465Ah - Battery voltage: 80V - Battery test result: 39% Godjyvfn Djpfx Ahvouc - Transport dimensions: 3550mm x 1320mm x 1950mm (l x w x h) - Transport weight [kg]: 3900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Year of construction: 2025, functionality: fully functional, The KM 70/25 C hand-operated sweeper makes cleaning of hard surfaces both indoors and outdoors effective and efficient. The main roller brush and side brushes are battery-powered, significantly increasing operator comfort: users can easily sweep corners and hard-to-reach areas with much less physical effort. The foam filter with passive suction minimizes dust generation and keeps the work environment clean. The roller brush can be adjusted in six steps, tailoring cleaning performance to different surface types. A practical storage tray for additional equipment such as buckets or coarse dirt pickers facilitates operation. Tool-free replacement of the side brush and filter also makes maintenance straightforward. The 36 V Kärcher Battery Power battery platform provides ample power in any situation. The removable battery is easy to take out for convenient transport. The machine is supplied with two batteries and a charger. Technical specifications: Gsdpfx Ahexf Hn Asveuc - Working width with two side brushes: 980 mm - Container volume: 20 liters - Area performance: 3,920 m²/h

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAN 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle axis: -20 to 430 mm - Distance between B-axis center and spindle axis: 4 - 410 mm - Distance between B-axis center and spindle axis: -10 mm - Distance between pallet centerline and bed zero point: 265 mm - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, up to 150 mm with adjacent stations free The machine is equipped with a chip conveyor and a coolant system. Note: Includes the tool holders installed in the tool changer! Note: The machine can be transported on a truck with a width of up to 2,700 mm! Note: The item must be collected bindingly at a date to be coordinated between 24.08. and 27.08.2026. Godpfx Asy I Sfhohveuc FCA D-61352 Bad Homburg – loaded onto truck

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, The following machines are offered: 2x Baier embossing press GEBA 49/25, year of manufacture 1991 and 1992 Gsdpfey Hxv Rox Ahvouc 1x Baier embossing press GEBA 77/5, year of manufacture 1985 If you have any questions or need more information, please feel free to send a message or call.

Condition: used, Year of construction: 2021, operating hours: 4,578 h, 2021 | Hitachi ZX250 LCN-7 | Used Tracked Excavator | 4578 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Godsytf Aijpfx Ahveuc 💰 Buy Now for EUR 94000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 61 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Strong engine with no blog by and smoke. Strong batteries. No play on stick and boom pin. However the body wiggles when operating, which may indicate a usage of the slew ring. It's sold with 1800mm excavation bucket. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40201 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Gedpfx Ahoya Eldsvouc Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: reconditioned (used), Year of construction: 2021, portalkran 2x35 ton 25 or 28 meter spann longer possible Gjdpfxeggggpj Ahveuc

Condition: used, functionality: fully functional, Year of construction: 2014, fuel type: diesel, Forklift Still RX70 - 25 / diesel Year of manufacture: 2014 Safety inspection (UVV): 03 / 2027 Overall height: 2.67 m Lifting height: 4.25 m Fork length: 1.2 m Particulate filter - Eberspächer Gujdpfey Hp Hmjx Ahvoc Full cabin Side shifter Fork positioner

Year of construction: 2026, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 40 x 20 x 60 cm CE mark: yes Serial number: DPX-27500 Please contact Team DPX for more information Gsdpfx Ahsy Dnvbsvsuc Automatic Transfer Switch - ATS Panel - ATI Panel 45 Ampere - Applicable for generators up to 25 kVA

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Gusdpfx Aoiyyndjhvsc Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Gsdpjiyynwofx Ahvsuc > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,407 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,262 kg, drive type: Diesel, Diesel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 23x9-10 Rear tires type: Superelastic Rear tires size: 21x8-9 Description: In addition to this unit, we also offer a wide range of forklifts and warehouse equipment. All our machines are serviced and inspected according to FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to buy your used equipment — even if you do not purchase a vehicle from us. Leasing and financing options available on request at attractive terms. We are happy to provide you with professional and comprehensive advice on our vehicles. Side shifter, 3rd valve, rear working lights, front working lights, heating, soot filter, full cabin, CE certificate, safety light, interior mirror, joystick, beacon, wiper, single pedal, LED, seat. Gujdpjy Aqh Refx Ahvjc

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 4,767 h, load capacity: 2,500 kg, lifting height: 4,170 mm, load center: 500 mm, fuel type: diesel, mast type: simplex, construction height: 2,775 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 mm Gusdoytyugepfx Ahvsc Mast type: Standard Condition: Refurbished without warranty Technical condition: very good Front tires type: Superelastic Front tires size: Factory new Front tires condition: New Rear tires type: Superelastic Rear tires size: Factory new Rear tires condition: New Description: Overhauled, serviced and inspected in accordance with FEM 4.004 (UVV) // Completely repaired, serviced and checked Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, road-legal (StVZO), full cab, beacon, - Reversing camera with pedestrian detection - Hazard area marking

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Godpfx Ahehfxkasvjuc Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Gedpfx Aouxfu Njhvjuc Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...