Used Vortex Robopop Mark Iv for sale (6,314)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences Nedpfx Ajy Nmi Rjkuelb

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Njdsy Rumyopfx Akuolb - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening Nledpfx Asy Rulvskueb – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Nsdpfxey Icgio Akuolb Steam: max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status Nsdpfx Aksrxrrhouelb - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, operating hours: 2 h, Model 2023 - Professional fiber laser source XRAYmark with 20 Watt power and 400 kHz - Scanner unit "PreciseView" with camera for live image - T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) - Viewing window with certified laser safety glass - scanning area approx. 100 x 100 mm - manual height adjustment - Housing with man. Lift door for easy and safe marking. EZCAD III software - Barcode and QR-Code support - Serial number function - Batch scanning from Excel file - Laser parameter finder by matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP Connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like third party camera position detection etc. - Industry 4.0 via the TCP/IP protocol can be processed at any time the state. - Inputs and outputs for direct interaction with the outside world - New look and feel. A fresh design which allows an even clearer and more pleasant operation. - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins. - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned Galvo Generation (Eco, Hi-Speed & 3D) with 2x laser pointer to visually check the focus position. Cuhn227e - LED illumination of the marking area - Connection possibility for external suction - Start button and emergency stop on the housing - Software for PC for Windows operating system - USB cable for connection to the computer - Instruction manual and operating software in German As option offer among other things =ᐳ IPG laser source / fiber laser source in various powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for stocking, conveyor belts and much more! =ᐳ 3D Marking and GRAVING Function. =ᐳ automatic focus adjustment =ᐳ rotating unit =ᐳ motorized carriage =ᐳ Interlock system for marking WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts. Nedpjd Ibu Nofx Akujlb incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our factory in Schweinfurt! Therefore, individual requests are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, #Laser marking machine for marking many materials. Extremely clean and high contrast #engravings are achieved with the fiber laser source. This #laser engraving machine is economical and easy to use.

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. Nlodpfxjxhfzgs Akueb IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, Year of construction: 2017, Line marking machine: + Larius + Miro Liner Plus Nodpfjy Ix Hxox Akuelb + Year of manufacture: 02/2017 + Yamaha MZ175 petrol engine, 5.5 HP + Miro airless pump + Spray gun + Weight: 60 kg + Machine from municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nedpfeyutvyox Akujlb We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Nljdpfx Aksyhnu Dsueb Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Condition: used, Year of construction: 2009, operating hours: 3,628 h, functionality: fully functional, machine/vehicle number: 213294, workpiece length (max.): 1,000 mm, The Mazak INTEGREX 200-IV T is an advanced 5-axis turning and milling center that combines turning and milling functions in a single machine, and is used in the aerospace, automotive, and tool manufacturing industries. Njdpfxsv R Uv As Akuslb The machine is in very good condition; it was operated 5 days a week for 8 hours a day. It has been used sporadically in recent years. The machine is being sold due to the closure of a service facility. The last photo shows the total operating time. The screenshot is from a year ago, but the machine has not been used since then.

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: automatic, fuel type: gasoline, color: light green, Year of construction: 1997, Line marking machine: + Zindel Njdpfx Aoy H Hzuskuslb + City 2 + Year of manufacture: 1997 + 2x paint sprayers + sighting rod + self-propelled + 40l pressure tank + from municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 9 kW (12.24 HP), gearing type: hydrostat, fuel type: gasoline, color: white, number of seats: 1, Equipment: onboard computer, Line marking machine: + Airless pump Speeflo 4900XLT + Bead container + Self-propelled forward/reverse + Bead dispenser Nlsdoy H Hg Repfx Akujb + Line marking spray gun + Hand spray gun with hose + Honda GX390 engine, 12 HP + Line section computer Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, intermediate sale reserved!

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Nodpfx Akey Hi D Soujlb Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, loading space length: 103,500 mm, loading space width: 26,000 mm, loading space height: 37,300 mm, Year of construction: 2014, For inquiries about the vehicle, Mr. Seidel will assist you (by phone at r RZK/18 IV refrigerated box with tail lift. Cooling: Carrier Supra 950U, tail lift: BÄR BC 2000S4-C4, BPW axles, permissible total weight: 18,000 kg, unladen weight: 6,980 kg, payload: 11,020 kg, cargo space dimensions: L 6,830 mm x W 2,490 mm x H 2,330 mm, cargo volume: approx. 40 m³, tire tread: 1st axle 5-7 mm, 2nd axle 5-6 mm. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. ... Errors, changes and prior sale excepted! = Further information = Gross vehicle weight (GVW): 18,000 kg. Please contact Tobias Ebert for more information. Nodpfx Aeynrhhjkuolb

Condition: used, loading space length: 74,400 mm, loading space width: 24,900 mm, loading space height: 22,900 mm, total width: 26,000 mm, total height: 37,300 mm, Year of construction: 2013, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). RZK/18 IV Refrigerated Box Tandem Trailer Nsdeyfvikepfx Akujlb Cooling unit: Carrier Supra 950U, Tail lift: BÄR BC 2000S4-C4 (2,000 kg), Through-loading, BPW axles, Wabco ABS, Disc brakes, Spring-loaded brake, Air suspension, Additional spotlights: Left and right sides, rear of vehicle, Permissible total weight: 18,000 kg, Unladen weight: 6,980 kg, Payload: 11,020 kg, Cargo area dimensions: L 7,440 mm x W 2,490 mm x H 2,290 mm, Tire tread: 1st axle 14-15 mm, 2nd axle 6-8 mm Leasing or financing options available upon request. Mr. Seidel (tel.) will be happy to assist you. Further information can be found on our homepage. ... Errors, changes, and prior sale excepted!!! = Further Information = GVW: 18,000 kg Please contact Tobias Ebert for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Extraction system for double mitre saws or saws used in the aluminium sector, e.g. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici etc. If you are looking for a powerful and quiet extraction system, you have come to the right place. Alternatively, a pre-control unit including a switch is available for your double mitre saw, which operates via a potential-free contact. The extraction system is perfectly suited for aluminium, PVC, and steel. Nsdpfjwii Hxjx Akuslb Very powerful and extremely quiet extraction unit operating below 80 dB! 2600 m³ per hour extraction capacity 3 kW motor The extraction system includes a 14-metre hose with 2 outlets.

Condition: used, functionality: unexamined, machine/vehicle number: DC18330, total width: 2,000 mm, total length: 2,000 mm, We are offering this used Johann Fischer Aschaffenburg measuring plate, type IDT009 – surface plate, spotting plate, marking-out plate, year of manufacture unknown. Manufacturer: Johann Fischer Aschaffenburg Origin: Made in Germany Type: Measuring plate Item number: IDT009 DC number: DC 18330 Inventory number: QS-00355 Nlsdpfxjy H Dgbe Akuob Inspection date: 23.3.03 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1720266, Equipment: CE marking, Uhlmann Serialization Platform (USP) and Uhlmann line controller equipped with track & trace software. Manufactured in 2017, this equipment has been utilized for printing variable data, including 2D matrix codes, onto sealed and packed cartons in a cleanroom environment. Serialization coding and setup of variable data are managed via the line controller and then downloaded to the USP. The USP operates as a standalone unit with a left-to-right product flow. The process steps are as follows: - Closed cartons are received via conveyor belts - Variable data is printed using two Wolke inkjet print cassettes - The printed data is verified by a vision inspection system - Cartons rejected by the vision system are automatically ejected using compressed air - Approved cartons proceed to the outfeed conveyor Uhlmann support is required for configuring and operating the equipment as a serialization station. Nodoy D Nkyspfx Akujlb Carton specifications: - Minimum size: 30 x 15 x 65 mm - Maximum size: 130 x 105 x 250 mm - Maximum weight: 300 g - Conveyor speed: up to 60 m/min - Working height: 815–950 mm

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 Njdpfx Aey Emthokujlb - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, mileage: 366,920 km, power: 251 kW (341.26 HP), first registration: 03/2020, fuel type: diesel, number of seats: 29, gearing type: automatic, emission class: euro6, color: beige, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Our internal vehicle number: 1187 Solaris New Urbino IV 12 Power: 251 kW Emission class: Euro 6D Vehicle class: M3 First registration: 03/2020 * 1st owner in Germany, with inspection book * Voith automatic transmission 1/2/3/D/N/R * 28 + 1 seats * LAWO destination display (front/side/rear) with control unit * Electric sunblind * Air conditioning * Reversing camera * Door leaf locking system * Folding ramp * Large multi-purpose area – wheelchair / stroller * Convector heater * 2 folding windows installed on each side * Original mileage * Vehicle was branded – with adhesive film * Pre-wiring for TFT screen * NEW PAINT in RAL 9016 traffic white, applied in 05/2026 Note: Njdpfxsy E D Nme Akujlb Vehicle may be registered – mileage and condition may vary. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information is provided without guarantee. We reserve the right to sell the vehicle in the meantime. We refer to our general terms and conditions.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, type of input current: AC, type of cooling: air, overall weight: 120 kg, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,050 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) Nlodpfx Aoxd Az Nskuob - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Nedpfx Aswkpxkjkujlb - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 2019, machine/vehicle number: 10-2019-01, functionality: fully functional, power: 8.25 kW (11.22 HP), input voltage: 230 V, input current: 182 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 15 t, table width: 2,500 mm, table length: 8,500 mm, table height: 870 mm, ram plate width: 250 mm, ram plate length: 250 mm, distance table to ram: 135 mm, total length: 9,470 mm, total width: 2,745 mm, total height: 1,805 mm, overall weight: 1,500 kg, Equipment: CE marking, The press has been used quite a bit, it could be 3500 machine hours. A great workplace for one operator to produce small-sized trusses. With this press, one person can produce about 30 trusses per day. The press has a memory function. If you need to produce several identical trusses, then for each subsequent one you just need to press a button and the press does its job without the operator's involvement. Nlsdpfxey Emyzs Akuob

Condition: used, Year of construction: 2015, functionality: unexamined, input voltage: 230 V, type of input current: AC, laser power: 20 W, door opening width: 800 mm, scan area length: 1,000 mm, scan area width: 450 mm, input current: 16 A, laser wavelength: 1,050 nm, working height: 303 mm, input frequency: 50 Hz, working width: 1,000 mm, We are offering this used Trotec Speedmarker 1300 20 Watt/SM1300 SZ SX SY industrial laser marking machine, year of manufacture 2015. Serial number: M13F-0102 Model designation: SM1300 SZ SX SY Date of manufacture: February 2015 Number of phases: 1~ Voltage: 230 V AC Current: 16 A Frequency: 50/60 Hz Rated power: 1500 W Laser crystal: Yb Laser power: 20 W Laser wavelength: 1050–1090 nm Wiring diagram no.: Speedmarker FL 10-50W Laser diode power: < 0.5 mW Laser diode operating mode: cw Nledpfx Akoy Ecn Iousb Laser diode wavelength: 635 nm Trotec Speedmarker 1300 20 Watt Fiber, year 2015 FEATURES - 20 Watt fiber laser - Pilot laser & Focus Finder Laser - SpeedMark laser software - Industrial PC - Software-controlled X, Y, and Z axes - Working area: 1000 mm x 450 mm - Maximum part height: 303 mm (with f = 254 mm lens) - Heavy-duty worktable with T-slot plate - Illuminated working area - RGV rotary axis for round parts Preparation for extraction system (extraction not included in the sale). We also have 2 smaller Trotec models available for sale: Trotec Laser Work Station 20 Watt Laser, year 2010, with rotary axis If you have any questions or require more information, please feel free to send us a message or call us.