Used Wecon Verzinkte Plattform 28 Zurringe for sale (4,843)

Condition: new, empty load weight: 6,650 kg, maximum load weight: 21,350 kg, overall weight: 28,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing eyes, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, climbing bar on the outside of the ramps and rear slope, hydraulic one-piece ramps, loading height: 880 mm, technical possible total weight: 31 t, incl. axle load indicators. Additional options: Last axle as steering axle: €3,500; warning panels + lighting and rotating beacon: €200; width extension to 3 m with timber: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Subject to misprints, errors and changes, sample images -- More data at: !, More Details: ! Kledpjzncymofx Ah Aow

Condition: used, mileage: 85,900 km, power: 92 kW (125.09 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2028, color: white, gearing type: mechanical, emission class: euro5, loading space length: 3,250 mm, loading space width: 2,130 mm, loading space height: 400 mm, Equipment: ABS, central locking, soot filter, Transit FT 350 2.2L diesel, 125 hp. Aluminum side panels with protective grille, cargo dimensions: 3.25 x 2.13 x 0.40 m. Wheelbase 3.50 m. Radio/CD, 6-speed transmission, ABS, ESP, power steering, rear wall with window, trailer hitch (ball type) + electrical connection, lashing eyes, color, spare wheel, central locking, immobilizer, 16-inch wheels, airbag, armrests, hill-start assist, etc. =====German registration + excellent tires + last service at 84,900 km===== ===Daily purchase of commercial vehicles, as well as trade-ins possible=== Price: €9,500. Section 25a of the German VAT Act. Kledpszdmnasfx Ah Asw

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Klodpfx Aezmxatjh Asw Stroke 12 mm Electrical connection 220 Volt Overhang 130 mm Table 200 x 150 mm

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm Kodpfxezl Ufce Ah Aolw - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Connecting coupling: Torsionally flexible shaft coupling -Shaft: Ø 28 mm -Dimensions: Ø 100 x 100 mm -Weight: 3.0 kg Ksdpfxszlga So Ah Ajlw

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling Klsdpfszld Nkox Ah Asw -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available -Price: per piece -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system Kodsxd A I Aopfx Ah Aolw - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus Ksdpfxoy T Ixne Ah Aslw - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) Kljdpfjv Sybyex Ah Aew - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: good (used), empty load weight: 3,145 kg, maximum load weight: 14,855 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2011, next inspection (TÜV): 10/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Trailer galvanized Twin tires 235/75R17.5 BPW axles Drum brakes Long air springs Lifting height 1390 mm Immediately ready for use With valid technical inspection (TÜV) and safety check (AU) Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! INSPECTIONS ONLY BY APPOINTMENT! ##### Kljdpszmp Dcjfx Ah Aow

Condition: used, mileage: 205,658 km, power: 206 kW (280.08 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 6,100 kg, maximum load weight: 5,890 kg, overall weight: 11,990 kg, tire size: 265/70 19,5, tire condition: 50 %, axle configuration: 4x2, wheelbase: 3,100 mm, next inspection (TÜV): 06/2027, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, total length: 4,200 mm, loading space volume: 5 m³, loading space length: 4,200 mm, loading space width: 2,370 mm, loading space height: 600 mm, Year of construction: 2018, operating hours: 205,658 h, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, Equipment: air conditioning, central locking, electronic stability program (ESP), hydraulics, immobilizer system, onboard computer, sliding door, soot filter, trailer coupling, truck registration, Reference number for inquiries: 41192 Iveco, Euro Cargo * Year of manufacture: 2018 * Tow hitch * ESP * Power windows * Air conditioning * Particle filter * Power steering * Immobilizer * Central locking * Tipping hydraulics * On-board computer * Load securing certificate DIN EN 12642 Code XL * Steel tipper body * Digital tachograph * Radio/CD player * USB interface * Electric windows and mirrors * Remote central locking * Comfort suspension seat * MP3 interface * Inspections: HU/AU (Technical Inspection/Emissions Test) valid until 06.2027 * Transmission: Automatic * Suspension: Leaf spring / Leaf spring * Gross vehicle weight: 11,990 kg Klodozlbf Nopfx Ah Aow * Unladen weight: 6,100 kg * Payload: 5,890 kg * Permissible total weight: 11,990 kg * Tire condition, front axle: 40% – 40% - Tire size: 265/70 R19.5 * Tire condition, rear axle: 50% – 50% - Tire size: 265/70 R19.5 * Wheelbase: 3,100 mm * Tire sizes: 265/70 R19.5 * Internal dimensions: L = 4,200 mm, W = 2,370 mm, H = 600 mm * Internal volume: 6 m³ * Pallet spaces: 10 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists. We will be happy to advise you.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Kljdpfxezl R S Se Ah Ajw Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, mileage: 264,549 km, power: 61 kW (82.94 HP), first registration: 11/2004, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 5, emission class: euro3, total length: 5,650 mm, total width: 1,960 mm, total height: 2,500 mm, loading space length: 3,240 mm, loading space width: 1,900 mm, loading space height: 1,440 mm, Year of construction: 2004, Equipment: ABS, full service history, power assisted steering, General information Number of doors: 2 Model range: May 2001 - Jul 2006 Model code: ### Cab: single Technical information Torque: 200 Nm Number of cylinders: 5 Engine capacity: 2.461 cc Weights Empty weight: 1.930 kg Carrying capacity: 870 kg GVW: 2.800 kg Functional Make of bodywork: van Stenis Carrosserie Interior Interior colour: grey Maintenance, history and condition APK (MOT): tested until 02/2027 Number of keys: 2 Klsdozk El Rspfx Ah Asw Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - Controlled slip differential - Front headrests - Heat reflecting glass - Immobiliser - Tinted glass

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 11/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Multiple units in stock GALVANIZED Twin tires 235/75R17.5 Long air suspension bellows Lifting height 1390 mm Drum brakes Net unit price 3,950 EUR Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Kedpfozmnw Iex Ah Aolw

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZCFEE2RXX0C546735, mileage: 4,156 km, power: 426 kW (579.20 HP), first registration: 05/2025, fuel type: diesel, empty load weight: 11,188 kg, maximum load weight: 14,812 kg, overall weight: 26,000 kg, tire size: 385/55 + 315/70 R 22.5, tire condition: 95 %, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 580 l, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2024, Equipment: ABS, AdBlue, Android Auto, Bluetooth, USB port, additional headlights, air conditioning, crane, cruise control, differential lock, electric window regulation, fog lights, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power mirror, retarder, seat heater, soot filter, tachograph, traction control, trailer coupling, our vehicle number #30628 Cab: Active Space Euro VI 580 hp 6x2 configuration Wheelbase: 4,500 mm Retarder BLL suspension Tire size: 385/55 + 315/70 R 22.5 Permissible total weight: 26,000 kg Payload: 14,812 kg Unladen weight: 11,188 kg Tank capacity: 580 liters Color: ultramarine blue Alloy wheels Differential lock Automatic transmission Air conditioning Loading crane: Hyva Titan 20-57 S Lift axle PTO (power take-off) Disc brakes Cruise control Traction control 1 sleeper berth Air-suspended driver's seat (heated) Refrigerator Iveco infotainment system incl. navigation system Electric sunroof Parking air conditioning ACC adaptive cruise control LDW lane departure warning system Rocking mode Hill start assist Reversing warning system Steering axle A3 Rockinger trailer coupling Air-suspended cab Central locking with remote control DPF (diesel particulate filter) Lamp bar with additional spotlights Rotating beacons Fog lights, auxiliary headlights Kodpfeyyki Nex Ah Aelw LED daytime running lights Air horns Multi-function leather steering wheel Onboard computer Electric windows (2x) Electrically adjustable & heated exterior mirrors Camera pre-installation Toolbox Mesh basket Apple CarPlay Android Auto Sun blinds left & right Financing available on request!

Condition: good (used), loading space length: 8,900 mm, loading space width: 1,720 mm, loading space height: 2,130 mm, color: red, Year of construction: 1997, operating hours: 905 h, General information Field of application: Construction Drivetrain Type of fuel: Electric Make of engine: Hatz Weights Empty weight: 3.500 kg Functional Mast: telescopic Lifting capacity: 200 kg Lift height: 2.600 cm Working height: 2.800 cm Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Reconditioned: Yes Delivery terms: EXW Max. horizontal reach: 1160 m Max swing of platform in degrees: 999 Klsdpfxozmltyo Ah Asw Latest inspection: 2026-07-17 Production country: DK Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: new, Landert Engines 112-28-MK-FAM2, liquid-cooled engine, serial number: 89289/002, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Kljdpfxsi D I Emj Ah Asw

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools Kljdpfezkl Husx Ah Ajw

Year of construction: 1994, condition: good (used), “Hein Lehmann Liwell Flip-Flow Vibrating Screen LF 3,0 – 8,82 / 28 ED” for Sale Ksdpfx Ahoglvxhe Aelw Manufacturer: Hein Lehmann Liwell Type: LF 3,0 – 8,82 / 28 ED Size: 3.000mm x 8.820mm Decks: 1 Year of Manufacture: 1994 Part of frame and conveyor included. Vibrating Screen will be overhauled, sandblasted and painted in color as requested.

Condition: excellent (used), mileage: 419,207 km, power: 206 kW (280.08 HP), first registration: 05/2004, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, Year of construction: 2004, Equipment: ABS, differential lock, electric window regulation, power mirror, = Additional Options and Accessories = - Differential lock - High beam headlights - Speed limiter - Radio/CD player - Sun visor - Toolbox = Further Information = Technical Information Number of cylinders: 6 Transmission Kedpfx Ahszkkhdo Aslw Transmission: ZF, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Front axle: Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle: Differential lock; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 7,540 kg Payload: 10,460 kg GVW: 18,000 kg Functional Pump: Yes Condition Technical condition: very good Visual condition: very good Damage: none Financial Information Price: On request

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 05/1989, total width: 2,500 mm, wheelbase: 9,170 mm, color: other, Year of construction: 1989, Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Rear axle 3: Max. axle load: 10000 kg Empty weight: 10.180 kg Kledezi Rltopfx Ah Ajw Carrying capacity: 33.820 kg GVW: 44.000 kg Registration number: OB-63-FG

Condition: excellent (used), mileage: 38,973 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2021, Equipment: ABS, EBS, cruise control, trailer coupling, = Additional options and accessories = - Air suspension system - Electrically adjustable seats - Gullet - Power take-off (PTO) - Speed limiter - Steering wheel audio controls - Sun visor = Remarks = Drivetrain PTO: 1739 uur Superstructure Construction year: 2021 2021 MAN TGS 28/470 in absolute top condition with only 39,000 km. This one is configured as a sewer cleaner and has the following specification: Brand: Kroll Type: Combination gully cleaner Model:K14.0/28p Total capacity: 14,000 liters Adjustable partition with 3 positions Water tank position, Sludge tank: 1. 3300 liters, L10600, 2. 5300L 8600, 3. 7300, 6600L Large high-pressure hose reel behind 180m DN 25 HD hose Small high-pressure hose reel behind 60m DN 13 HD hose Suction hose storage cassette with 180-degree telescopic arm High-pressure water gun Sound-insulating panels left and right Remote control High-pressure water pump Brand: Uraca Model: KD718 Capacity 315 liters per minute at 170 bar Vacuum pump Brand: CVS Model: Vacustart 1600 Capacity: 1600 m³ per hour Dutch machine in top condition! = More information = General information Number of doors: 2 Registration number: 60-BRN-8 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 17.659 kg Carrying capacity: 10.441 kg GVW: 28.000 kg Functional Make of bodywork: Kroll K14.0/28P Water tank: Yes Maintenance APK (MOT): tested until 06/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Number of hand transmitters: 1 Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 Kljdpfxjzi S E Is Ah Aow 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Kljdpfx Asyync Toh Aew Length stop range: 1750 mm Weight approx.: 740 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) Klsdswlc Stjpfx Ah Ajw with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Klsdpfeu Smd Eox Ah Aow Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg