Used Weidmüller Plc Transfer Element for sale (6,569)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² Pjdpsykvdlsfx Ag Dopr - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: new, Year of construction: 2026, The machine is designed for sharpening planer knives mounted in a package. The sharpener is characterized by a rigid and compact structure with a built-in cooling system Automatic grinder for sharpening planer knives ON1500PLC by VIBER-SYSTEM The machine is designed for sharpening planer knives. The device is characterized by a rigid and compact structure with a built-in cooling system. The machine is mainly used for grinding various right angles of cutting tool blades, such as carpenter's planers, rotary knives, paint spatulas, paper knives, shredder knives, etc. It mainly consists of a machine body, a work table, a slide carriage, a grinding head, automatic feeding, electrical components and cooling - a total of 7 parts. All components have a reasonable and compact structure, and the appearance of the machine is aesthetic. Fully automatic sharpening with X and Y axis feed. High Efficiency: The ON1000PLC sharpener is an efficient device that allows for quick and effective sharpening of planer knives, contributing to increased work efficiency in the plant. Large Dimensions: With a larger version of the model with an impressive weight of 520 kg, the machine ensures stability and solidity of operation, which translates into precision and quality of processing. High Speed: Thanks to the ability to generate grinding disc revolutions of up to 1440 rpm, the sharpener guarantees quick and effective sharpening of planer knives without compromising on quality. Magnetic Mounting: Equipped with a stool with magnetic mounting, the machine ensures stability and safety during the sharpening process, eliminating the risk of knife displacement. Universal Application: The ON1000PLC sharpener is used both in small carpentry workshops and in large sawmills dealing with mass processing of wood and wooden materials. Model: ON1500PLC Max. working width: 1500 mm Table with magnetic mount: 140x1500 mm Grinding angle: +/- 90° Automatic workflow in the X axis Automatic and manual adjustment of the Z axis Grinding disc speed: 2800 rpm Grinding disc: Ø 150 x 68 x 32 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 2.2 kW/400V Feed motor power: 120W Coolant pump power: 90W Cooling device protecting against overheating of knives: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Ppjdpfetvm A Nox Ag Dor Dimensions: 2070x950x1450 mm Weight: 850 kg

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M08E/9141, Offer Number: M08E/9141 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off Make: PELTZER-EHLERS Type: GB30-4 Constr. year: 1977 diameter range: 16 - 30mm number of dies: 4 Ppsdpoy Dc H Ujfx Ag Dor number of stations (incl. cut off): 5 cutting length: 260 mm shaft length under head: 225 mm output - pieces/min: 60-80 press power: 450 t Location: Europe

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Ppjdpfx Agevf Ig Dj Djr

Condition: used, Year of construction: 2013, Table, rotatable, extendable, and tiltable Dimensions Base dimensions: 2000 x 1750 mm Dimensions (max extended): 4500 x 2500 mm Max. payload when tipping: 250 kg Max. load capacity when lifting: 370 kg Equipment conveyance roller tracks: Podpfx Agoy Dcico Dopr Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines. Roller rails mounted in front of the uprights at 120 mm spacing. Pre-feed version with automatically retracting plant part during feeding with the table. Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm. Roller conveyor front open for driving in with the assembly table at the element transfer. Roller height adjustable from 330 to 380 mm. Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking

Condition: like new (used), 3 unused clamping elements Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Ppsdjy A Nkkspfx Ag Djr Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: like new (used), 1 set of clamping elements, size M20, in a mobile auxiliary cabinet, W x D x H approx. 0.6 x 0.6 x 1 m, featuring: - 3 very sturdy drawers - manual locking/unlocking of each individual drawer Ppjdpfxjy Awp Ie Ag Dsr

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: M08E/9148, Offer Number: M08E/9148 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB200 Constr. year: Ü 2025 diameter range: 8-20mm number of dies: 4 number of stations (incl. cut off): 5 output - pieces/min: 50 shaft length under head: 200 mm Podpsyzzc Asfx Ag Depr cutting length: 225 mm Location: Europe

Condition: used, Year of construction: 2005, Feeder(s) for gathering machine Kolbus ZU 841.A Year: 2005 Description: Pjdpfx Aoyzdu Iog Depr - Number of feeders: 3 - Horizontal feeder(s) - ATC thickness control - Excluding pump Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Feeder(s) for gathering machine Kolbus ZU 841.A Year: 2005 Description: - Number of feeders: 3 - Horizontal feeder(s) Ppodpjyzduujfx Ag Der - ATC thickness control - Excluding pump Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Ppodpey D D Rhefx Ag Der Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: M08I/8022, Offer Number: M08I/8022 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off Make: MALMEDIE Type: QPB131 Constr. year: 1971 diameter range: 8 - 20 mm Ppjdjyzrxhopfx Ag Dsr number of dies: 4 number of stations (incl. cut off): 5 cutting length: 175 mm shaft length under head: 142 mm output: 40-80 press power: 250 to Location: Germany

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Podjyz Um Uspfx Ag Dopr Press force: 5,000 kN Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Condition: excellent (used), Year of construction: 1999, Manufacturer: Müller Weingarten Press Type: HUQ 630.40 Pressing force: 6,300 kN Table area: 4,000 x 1,600 mm Ram area: 4,000 x 1,600 mm Ram stroke: 124-400 mm Ram adjustment: 200 mm Strokes per minute: 10-60 1/min Tool change system: tool change cart Ppodpfx Ajyz Shvjg Der Including transfer and ARKU strip feeding line

Condition: used, Year of construction: 2019, High-performance automatic transfer switch (ATS) from the ASCO 7000 Series, designed for critical power infrastructure in data centers, hospitals, industrial facilities, and backup power systems. This is a G-design unit with a solid neutral, rated up to 1200 amps, 3-phase, with Group 5 Controller and Type 1 enclosure. Technical Specifications: Series: ASCO 7000 Series ATS Design: G-design Current Rating: Up to 1200A (model shown) Voltage: 480V Poles: 3 (Three-phase) Neutral: Solid (A) Control Module: Group 5 Controller Enclosure Type: Type 1 Frequency: 50/60 Hz Transfer Type: Automatic (Open Transition standard) Certifications: UL 1008, CE, ISO 9001 Ppodew Enquepfx Ag Dor Features: Field connections via terminal block (TB) Transfer Control & Indicators on door panel Engine Start contacts, Auxiliary Circuits Alarm relays, test functions, diagnostics Fault withstand and closing ratings suitable for generator/utility configurations Compatible with bypass/isolation options (in extended models) Application Areas: Data Centers & Critical IT Healthcare & Life Safety Systems Industrial Facilities Government and Military Infrastructure Commercial Buildings with Backup Generators Condition: Used – Excellent condition, from professional environment. Units available: 12 units in stock

Condition: used, New: No Part suitable for: trucks Price: On request Pedeyyyq Aopfx Ag Depr VAT/margin scheme: VAT deductible Type number: 1877325

Condition: new, Tilting Transfer Table Brand: Pertici Model: BF TEA 20-14 Pedey A Imdjpfx Ag Dopr Tilting and extendable assembly table for the production of sashes and frames. Complete with pneumatic retractable roller conveyor. Work surface with profiles equipped with anti-scratch gasket. Dimensions: Minimum width: 2,000 mm Maximum width: 3,900 mm Minimum depth: 1,374 mm Maximum depth: 2,400 mm Working height: 932 mm

Condition: good (used), 90° transfer output for crosscut saw or four-sided planer Ppjdpfx Agsyx H N Ae Dor

Condition: used, Year of construction: 2004, ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. Psdpfx Aeyzt T Tog Depr The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Power (Ton): 30 Number of rollers: 2 PLC: YES

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M08E/9065, Offer Number: M08E/9065 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SAKAMURA Podpfx Asx Igg Tsg Dopr Type: BPF540 Constr. year: 1990/09 diameter range: 23 mm number of dies: 5 number of stations (incl. cut off): 6 cutting length: 175 mm shaft length under head: 130 mm output - pieces/min: 86 - 130 press power: 220 to Location: Europe

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: KIESERLING Ppodpfx Asxlr I Isg Der Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 cutting length: 175 mm shaft length under head: 6-140 mm output - pieces/min: 125 press power: 250 to Location: Europe

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08I/8625, Offer Number: M08I/8625 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: KIESERLING Ppjdpfeygv Ayjx Ag Dor Type: K54 Constr. year: 1981/2011 diameter range: 8-22 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 175 mm shaft length under head: 155 mm output - pieces/min: 105 press power: 250 to Location: Germany

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/9030, Offer Number: M08L/9030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SCHULER Type: GB15-5 Constr. year: 1988 diameter range: 8-18 mm number of dies: 5 number of stations (incl. cut off): 6 shaft length under head: 120 mm Ppedoxgt N Nepfx Ag Dor cutting length: 140 mm output - pieces/min: 60-170 press power: 100 to Location: In our warehouse

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: M08I/8897, Offer Number: M08I/8897 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO Make: SI MILANO WAFIOS Type: SI 150 Ppjdpfewi Tg Njx Ag Dor Constr. year: 2005 diameter range: 16 mm number of dies: 5 number of stations (incl. cut off): 6 cutting length: 160 mm shaft length under head: 125 mm output - pieces/min: 150 Location: Germany

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08I/8765, Offer Number: M08I/8765 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: SACMA Type: SP350M Ppedpfswi S E Dox Ag Dor Constr. year: 1995 diameter range: 14 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 127 mm shaft length under head: 90 mm output - pieces/min: 200 Location: Germany