Used Weiler L-U Z Lathe for sale (88,859)

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WD700/10, Technical data: 1 Vetter / Demag pillar jib crane NL 500KG with Demag chain hoist Type AS5-4.0 Payload at full reach 500 KG / 0.5 tonne payload Height: approx. 3.75m UK boom: approx. 3.42m Reach: approx. 3.5m Hook height: approx. 2.85m Total weight approx. 800Kg including dowel plate 1050mm Rcodpfxov Hv Edj Amgob with Demag chain hoist 500Kg (older) Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 Rsdjymznhspfx Amgocb >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Rsdjng H T Uspfx Amgecb Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD750/9, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Type AS2.5-3 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.95m UK boom: approx. 3.7m Reach: approx. 3.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Rcodjvv Npzepfx Amgeb Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD1093/25, Technical data: 1 Vetter / Donati pillar jib crane NL 2000KG with chain hoist Type M20-4.5 Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.7m Rcodpjvv Nr Nofx Amgjb UK boom: approx. 3.28m Reach: approx. 4.5m Hook height: approx. 2.8m Total weight approx. 2000Kg including dowel plate 1570mm with Donati chain hoist NL 2000Kg with trolley drive Swivel range 360°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA38016, Technical data: 1x Demag KBK 2 column-mounted slewing crane, SWL 500KG, with Demag DC electric chain hoist (250Kg - year 2007) Load capacity at full outreach: 500KG / 0.5t Height: approx. 3.55m Under jib: approx. 3m Outreach: 3m Hook height: approx. 2.65m Total weight: approx. 550KG With 250KG Demag DC electric chain hoist Incl. bolts, cable trolley, travelling gear, end cap, etc. Slewing range: 300°, connection 400V 16A The crane is disassembled and available immediately Item location: 75053 Gondelsheim Rodpfx Amsx U Rbusgjcb More cranes available with load capacities from 80-5000Kg, please inquire See pictures Shipping via freight forwarder or collection strictly by appointment

Year of construction: 1989, condition: excellent (used), machine/vehicle number: RES-RIO, Technical data: 1x Demag KBK 2 column-mounted slewing jib crane NL 500KG with Demag PK2 chain hoist (Fig. shows DK chain hoist) 5 identical cranes are available !!! Payload at full radius 500KG / 0,5to payload Height: approx. 3.55m Lower boom: approx. 3.05m Outreach: 3m Hook height: approx. 2.55m Weight complete approx. 550KG Dowel plate 40x40cm with 500KG Demag PK2 chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Rodpfx Amju Rn I Nogocb Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition. Rjdovrcqdopfx Amgjcb

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Rjdevrckqepfx Amgjcb Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New Redpevrdlcefx Amgjcb >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm Rcsdpfxewrm Dte Amgsb >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal Rcodpewthbiefx Amgjb >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Redpfx Amsxbfutsgjcb

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Height: approx. 3m UK boom: approx. 2.5m Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg with chain hoist 250Kg chain hoist incl. bolt, cable drag, chassis, end cap etc. Rsdpfxjvv N Aus Amgscb Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: new, Year of construction: 2025, CONDOR VC plus The new dimension in conventional precision lathes. A high-quality, powerful and energy-efficient precision lathe for the highly productive area of production and toolmaking, but also for training and further education High-quality, energy-efficient, precise and universally applicable in production, training and further education. It impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimum space requirement and a wide range of accessories. The consistent and innovative further development of the tried-and-tested Condor series is the economical and intelligent solution for your daily applications. Technical data: WORKING AREA Center height 180 mm Swing diameter over bed 360 mm Swing diameter over facing slide 190 mm Center width 800 mm TURNING SPINDLE Spindle head DIN 55027/DIN ISO 702-3 size 6 Spindle bore 57 mm Rsdpfx Asqwipnjmgocb Spindle diameter in front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % ED - / 10.5 kW Speed range 25 - 4,000 min-1 Number of speeds infinitely variable FEED RANGE Number stepless Longitudinal 0.01 - 6 mm/rev Plan 0.003 - 2 mm/rev THREAD CUTTING RANGE Metric thread 0.1 - 20 mm REITSTOCK Quill diameter 50 mm Quill stroke 110 mm Internal taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clearly arranged 15" touch screen, rotatable and tiltable, resolution 1366 x 768 - Change of operating screens via swipe movements - Operating functions can be called up via app manager - Control panels can be freely configured, placed and scaled as required - Drawings / sketches can be imported from PDF files Can be zoomed individually via USB interface - Video-supported maintenance of the machine - Context help menu (instead of screen display WEILER VC plus) The machine is located in our showroom in 71334 Waiblingen-Beinstein and is available immediately. Please contact us regarding equipment.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Redpfjruqzcex Amgecb

Condition: excellent (used), SAPI Büffel 100 blasting cabinet with YASKAWA robot Year of production: 2020 Serial number: 20648 with industrial robot YASKAWA YR-1-06VX-A00, serial number: K18777-473-1 Control: YASKAWA Eras-1000-06VX8-E10 The cell was used for satin finishing of plastic elements. Rjdpfxovyh Dlj Amgscb

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Rcedowwt Trspfx Amgsb Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Mazak QTC 200 MSY L WE ARE SELLING NICE CONDITION Mazak qtc 200 MSY 1. *Capacity*: - Maximum Swing: 695 mm - Maximum Machining Diameter: 380 mm - Maximum Bar Work Capacity: 65 mm 2. *Spindle*: - Main Spindle Chuck Size: 8 inches - Main Spindle Maximum Speed: 5000 rpm - Second Spindle Chuck Size: 6 inches - Second Spindle Maximum Speed: 6000 rpm 3. *Turret*: - Number of Tools: 12 Redpfex H A Hmex Amgjcb - Maximum Speed: 5000 rpm 4. *Axes Travel*: - X Axis: 234 mm - Y Axis: 100 mm - Z Axis: 625 mm - W Axis: 585 mm 5. *Control System*: - Mazatrol SmoothC CNC

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, WE OFFER AN VERY NICE CONDITION 5 AXIS CNC LATHE HWACHEON MACHINE IS WORKING IN DAILY PRODUCTION ORDERS, SOLD WILL BE BECAUSE SOON IS COMING A BIGGER NEW. MODEL: CUTEX -180BL YSMC Rcjdpfjv Acpnjx Amgeb YEAR: 2019 HEAD STOCK HEIGHT: 1130mm MAX SPINDLE SPEED: 4500 RPM MAX CHUCK DIA: 8 INCH MAX CHUCK SPEED: 5000 RPM MAX WORKING DIA: DIAMETER 300 X 425 L WEIGHT: 4700 KG RATED VOLTAGE: 3 PE / 220 V (ac) FREQUENCY 50HZ ELECTRICAL POWER SUPLY 35 kWA RATED CURRENT 100A SHORT CIRCUT CURRENT RATING 5 kA LARGEST MOTOR 95 A CIRCUIT BREAKER CAPACITY 100A AMPERE INTERRUPTER CAPACITY 50 kA AIR SUPPLY: 0.5 MPa

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Rcedpfxjvk E Ayj Amgsb Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Rcodpfxjh Ibgpj Amgsb Output: 15-100kg/h Year: 1998-2006 Several available Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: SI73, Technical data: 1x Demag KBK 1 column-mounted slewing crane, SWL 250kg Safe working load at full outreach: 250kg / 0.25t Height: approx. 2.83m Underside of jib: approx. 2.3m Jib outreach: 3m Hook height: approx. 1.85m Total weight approx. 400kg including anchor plate 71x71cm With Demag PK chain hoist 250kg Includes pin, cable trolley, travel trolley, end cap, etc. Slewing range: 300° Connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity 80-5000kg, please inquire Rodpjwv N Ezefx Amgscb See images Shipping by freight carrier or collection by appointment only

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Rcedpfx Asrhzh Semgeb Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Rsdpfx Amsu H U S Hogecb Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation