Used Wire Decoiler For Ripped Wire for sale (7,022)

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Dsdohx R Etepfx Akhskr Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Dksdjwvv Rqepfx Akhor Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: new, Year of construction: 2026, Our modular Forstner decoiling system with decoiler towers and clamping rack offers a space-saving solution for various coil sheet unwinding requirements. The system can be individually equipped with up to eight 2,000 kg decoilers. Additionally, there is the option to integrate a separate pay-off unit for smaller coils up to 1,000 kg, enabling quick and flexible color changes. The clamping rack is a very cost-effective solution for fast and simple manual sheet changes. Up to eight coils can be securely clamped within the rack. The desired sheet is manually fed into the downstream machine using a handwheel. D2 – Decoiler Unit – space-saving as tower version Decoiler unit for 2,000 kg, braked, single-sided mounting, manual clamping, mounted at top or bottom. The coil is loaded directly onto the cantilevered mandrel using a crane, forklift, or pallet truck. The expansion mandrel is operated manually. Floor pay-off unit for 1,000 kg, braked, double-sided support, oscillating, bottom-mounted. Djdpex Ngyvefx Akhokr Version: stationary, bottom-mounted Advantage: easy loading Application: frequent coil changes

Year of construction: 2023, condition: new, GRS 14 Cable Stripper Machine Dkedpfx Aksmcbl Iehjr Power:380V/15KW/50HZ Diameter of cable to be processed：φ30mm～φ200mm Stripping Thickness:≤50mm Processing Speed:max.18m/min Net Weight:1200Kg Gross Weight:1350Kg Machine Dimensions:1620mm*1000mm*1700 mm（L*W*H） Package Dimension:1750mm*1130mm*1900mm（L* W*H）

Year of construction: 2023, condition: new, Cable stripping maschine ,wire stripper Djdpfjk Ra Tuox Akhekr Technical Data: Dimensions: W / H / D 75 cm / 68 cm / 86 cm Weight: app. 95 Kg Color: blue / yellow Cutting speed: app. 48 Meter per Minute Engine: 230V / 3000 W

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Dodpfx Aoyt Eldjkhskr Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: new, Diamond Wire for Precision Cutting Suitable for semiconductor, silicon wafer and precision material cutting applications. Manufacturer: Diamond Wire Material Technologies Quantity: 7 spools available Price: EUR 700 per spool Djdpfx Akozta E Rehjkr Specifications: Part No.: 17GNPU2506M30 Length: 30 km per spool Wire diameter: 231 µm Diamond size: 22–36 Core: 175 Spool type: MB80 Break strength: 97.8 N Original manufacturer's quality certificate included. New, unused.

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Dksdpsb Rnv Sjfx Akhsr Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, Type Production Line Dksdpfx Akozpbl Dsher Radiator production line Further information can be found in the attached PDF document. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Djdpfxezb Akts Akhjkr Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Year of production: 1991 Vacuum isolation: with certificate. Dkedpoyuu Scefx Akhsr We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces Dsdpfxjyfpg Ne Akhekr All bottles are complete, empty and ready for export.

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Dksdpfemk S Slsx Akhsr Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, functionality: fully functional, In this offer you purchase a used paper deck "Xerox AltaLink C81xx" Object of sale: 1 x Xerox AltaLink C81xx Paperdeck as accessory Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Dodpowymkvofx Akhekr Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr Dksdpfx Akogf Aaqjher MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: like new (used), TOOL FOR ROAD BARRIERS Dedpfx Aohylzrekhjkr LENGHT 6000mm

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Dksdpfx Aoytqxpokhor

Condition: good (used), Module converter, electronic module Dkedpfxsfcl H Is Akhsr -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm Dkedpfx Aeq Rxz Tskhor -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Dksdpfx Akefcl H Ujhsr -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Dedpfx Aocr Ru Djkhjkr Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Dodpfxsyuuc Io Akhokr Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Dkjdpfjyuubdex Akhjr Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 Dksdpozf Adgjfx Akher The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Dksdpfx Aksy S Nmdshsr