Used Zopf Ahb80 for sale (75)

Condition: new, Year of construction: 2022, bending press 10 ton with welding table Gjdpfxspz Hztj Ahveuc - motor 1 KW - 400 Volt 50 Hz 3 phase - with punch and die - bending high 150 mm - with welding table - 1000 x 1000 mm - moveable on wheels - welding table without accories

Condition: new, Year of construction: 2025, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm Gsdpfx Ajfiqntohvjuc - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable Gusded A Nc Depfx Ahvsc - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm Gujdpfed Ey A Asx Ahvoc - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw Gedpsgh T Iaefx Ahveuc - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable Gedpfedkxiyex Ahvjuc - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal Gujdpfxsfkz Rbo Ahvoc - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW Gusdpjgh T Hrsfx Ahvsc - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: as good as new (ex-display), Year of construction: 2024, shaft diameter: 60 mm, bending machine model AHB 60 ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory Guodpfxjdkxvme Ahvsc - standard roller set - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: new, Year of construction: 2025, tubebender-mandrelbender Zopf 32 H with small digital for programming Gjdpfxsfh Nz Tj Ahveuc mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: BB 60, Tube Bender BB 60 Gsdsd Eywyjpfx Ahveuc without mandrel with one set of tooling 60 mm radius ca. 175 mm with counter rollers - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set Godpfxsg Ntmho Ahveuc - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2024 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg Guedogh T Hkspfx Ahvoc - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model Gujdpfx Ahegrydbjvoc - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: new, Year of construction: 2024, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Gedpfxsdktnke Ahveuc

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW Gusdjdk H A Ijpfx Ahvsc - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) Gedpsdibygofx Ahvouc with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2023, tube bender R2 ZOPF Gededkxkxjpfx Ahvouc - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm Guodpfx Aed A Nb Hehvsc -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2026, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials Gujdpfxsx Irvmj Ahvec ⦁ Designed for pipes and profiles - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction - turning table - manual and automatic mode - Pre selection of bending angle 3 piece - 2 sideholders Gujdpfxodibzvs Ahvoc - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm Guedpfx Aedkxlkohvoc - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Gjdpfx Ahoy Awzkevsuc Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: like new (used), Year of construction: 2025, Tube Bender BB 76 without mandrel with one set of tooling 76 mm radius 275 mm with counter rollers - model BB 76 - capacity up to 76 x 4 mm round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 4 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 Guedpfx Asdihnuohvec - weight 600 kg - dimensions 600x1100x1000 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg Gedpjd S Uf Sofx Ahvouc motor 0,75 kw 400 Volt 50 Hz 3 ph.