Used Sk 40 for sale (23,833)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Pgsdpfow U Dt Nsx Ag Dsk

Condition: used, empty load weight: 8,987 kg, maximum load weight: 27,013 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2020, next inspection (TÜV): 02/2027, loading space length: 13,314 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 140,400 mm, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2020, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, type: deep freezer, operating hours: diesel 3,759 / electric 616, double deck with beams, electrical connection, color: white, air suspension with lift axle, lift and lower function, cooling types: road cooling with diesel drive and stationary cooling, lift axle: 1st axle, air distribution ducts with distribution mat, 36-pallet box, portal door, disc brakes, start/stop function, storage box 1, temperature recorder Euroscan, refrigeration unit type Thermo King SLXi 400 d/e, antispray, hat profiles, circulation wall, aluminum floor, double spare wheel holder with wheel, ferry lashings, spare wheel holder with 1 wheel, remote thermometer, load securing rail, digital fuel gauge, 2x7 + 15-pin power connections, LED side work lights, compressible dock bumpers (DRP), 2x LED reversing lights, partition wall prepared. Pgsdpoy Hxvdofx Ag Dek

Condition: used, We are offering used grating panels for sale. TECHNICAL DATA Dimensions: 600 x 1,630 x 40 mm Mesh size: 45 x 25 mm Surface: galvanized Condition: used PRICE €150.00 net per unit (10 pieces) €178.50 gross incl. VAT Available quantity: 304 pieces YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Pgodpjy H Hc Sjfx Ag Dek Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The extra costs depend on the place of delivery and the volume of the shipment and can be quoted individually upon request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding, customized quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for intralogistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and trade sectors. We regularly offer attractive used equipment from various manufacturers at excellent conditions. If you have any questions, please do not hesitate to contact us. "Four wins" – The cornerstones of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions.

Condition: used, We offer used grating panels here. TECHNICAL DATA Dimensions: 1,400 x 1,000 x 40 mm Mesh size: 35 x 35 mm Surface: galvanized Condition: used PRICE €210.00 net per sales unit (10 pieces) €249.00 gross incl. VAT Available quantity: 10 pcs YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at an additional cost. The extra costs depend on the delivery location and shipment size, and can be quoted individually upon request. Pgodpfey H E I Tsx Ag Dok PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailored quotation. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is per piece/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and crafts. We constantly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Dimensions (LxWxH): 80 x 65 x 200 cm Pgjdpfx Agjy Hpqfo Dek Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space.

Condition: used, mileage: 702,000 km, power: 324 kW (440.52 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 7,339 kg, maximum load weight: 10,661 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 01/2027, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, hydraulics, onboard computer, traction control, Unladen weight: 7,339 kg, permissible total weight: 18,000 kg, steel-air suspension, tipper hydraulics, retarder, tachograph, electronic braking system (EBS), electronic stability program (ESP), traction control (ASR), air-suspended driver's seat, radio, adjustable steering column, alloy wheels, outside temperature display, electric exterior mirrors, kerb mirror, tinted windows, CB radio, sun visor, cooling box, rubber floor covering, insulated cab, storage box, suspended cab. Subject to errors and changes. The windshield has a large stone chip. Upcoming service intervals: steering front axle 07/26, S12 and air dryer: 10/26, valve clearance and air filter: 01/27, cooling system: 10/27, axle oil and transmission oil: 01/28. Pgedpfxjy Hy Dis Ag Djk

Condition: new, functionality: fully functional, power: 382 kW (519.37 HP), fuel type: diesel, empty load weight: 14,500 kg, maximum load weight: 40,000 kg, overall weight: 56,000 kg, axle configuration: 8x4, fuel tank capacity: 400 l, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2025, operation weight: 25,500 kg, Equipment: ABS, additional headlights, hydraulics, MAN 41.520 TGS - NEUFAHRZEUG Muldenkipper 20cbm in Hardox 450 (Boden 0.80m/ Wände 0.60m) with hydraulischer Heckklappe und elektr. Schiebeplane 8x4 Differentialsperre blattgefedert Automatikgetriebe (with TipMatic) 13T AP-Achsen verstärkte Motorbremse Radstand 4.30m + 1.40m Nebenantrieb/ Kipphydraulik Vorberreitung für Anhängekupplung Euro 6 zGG 40.000kg - Nutzlast 25.500kg Podpsy Hiwrefx Ag Dsgk Reifen 100% 400L Tank Tempomat MAN Turn Assist MAN AttentionGuard Verkehrsschilder-Erkennung Sonnenblende Climate Zentralverriegelung electr. Fensterheber und Aussenspiegel ABS alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: used, maximum load weight: 30,443 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2017, Equipment: ABS, * SCHMITZ CARGOBULL * 3-axle refrigerated semi-trailer SCBS3 * SKO/24/L - 13. FP 45 COOL * From first owner (Germany) with only approx. 2,200 h diesel / 600 h electric * SC axles * SC refrigeration unit * Air suspension * Rear portal doors, slightly dented * Pallet box * Tyres: 50% (385/65 R22.5) * Dimensions: L-13,600 W-2,500 H-2,700 mm internal * Gross weight: 39,000 kg * Tare weight: 8,557 kg * Payload: 30,443 kg * Colour: white with lettering, chassis black Podpfxewyhzce Ag Degk * etc. ---- Subject to prior sale and errors! No guarantee on function of extras! We also speak: ENG / ITA / HR / SRB / BiH Your contact: Ludvig Kozuha, mobile WhatsApp, Viber Over 20 years' experience in the commercial vehicle purchase & sales! - RELIABLE & FAIR - Former DAF contractual partner!

Condition: used, mileage: 62,500 km, power: 130 kW (176.75 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 8,410 kg, maximum load weight: 1,090 kg, overall weight: 9,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, county Haus, 1x comfort seat, double passenger bench, seat heating, rear window, electric window left, electric window right, air conditioning, Telligent gearshift, differential lock, high beam headlights, work lights, rotating beacon, leaf spring suspension, trailer coupling (air + electrics), aluminum fuel tank, low-noise G1, winter service equipment, green environmental sticker. Wheelbase: 3,080 mm. Differential lock on front axle, dual-line trailer brake system, radiator protection grilles behind both radiators, auxiliary heater with engine pre-heating, fine dust and pollen filter, split-range gearbox with work group, torque converter clutch (WSK), VarioPower, pressure and return line at front for hydraulic circuits 3+4, dual-circuit hydraulic system with four chambers, snowplow relief function, acoustic reverse warning, rear-mounted PTO with flange. The vehicle is sold with a flatbed body! Pgodpfoxylpbjx Ag Djk Approx. 5,413 operating hours! Optional: Gmeiner salt spreader available for an additional EUR 6,500 and snow plow -9161- for an additional EUR 1,500! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Pjdpevwg Tmjfx Ag Degk

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg Pgjdsy Hgi Sepfx Ag Dek The machine has an adjustable table for block and booklet stitching.

Condition: excellent (used), For sale: horizontal planer/slotting machine from a renowned manufacturer: Ing. Karl Anderle, Steyr (Austria) Robust, heavy-duty industrial machine – ideal for workshop, toolmaking or production. 📊 Technical data: Manufacturer: Ing. Karl Anderle Type: 40 Year of manufacture: 1962 Machine number: 948/336 Working speeds: 30 / 60 / 90 / 180 strokes/min ⚡ Motor data: Manufacturer: FFD Wien Type: DU 1.5/2/4 Power: 2 / 1.5 HP Supply voltage: 380 V Current: 3.3 / 2.9 A RPM: 2800 / 1400 rpm Pgedpsy E N Tdsfx Ag Dok Frequency: 50 Hz 2-speed motor ✅ Condition: Used machine Normal signs of use Good technical condition Complete – as shown in the photos 📹 Video of machine operation available (WhatsApp) 🚚 Transport: Possible shipping on a pallet Personal collection Assistance with organizing transport available

Condition: used, axle configuration: 2 axles, first registration: 12/2021, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,690 mm, Year of construction: 2021, Operating hours Diesel 4,460, mains 489, body strength certified according to DIN EN 12642 Code XL ("TÜV load securing certificate"). International customs closure for body with rear wall door, with customs lock approval. Customs sealability to be ensured by customer when external KG mounting is carried out. 1 E-bike rack in basket design for 2 E-bikes behind the aggregate, SKO COOL. 4 pairs of Ferrylashings according to DIN/ISO 9367 for SKO COOL, with support bracket. Model SKO 24/L - 13.4 FP COOL V7. Manufacturing date 07.12.2021. Body length 13,403 mm. Body width 2,490 mm. Body height 2,650 mm. Usable body length 13,315 mm. Usable body height 2,550 mm. Total height unladen 4,008 mm. Total height front unladen 4,021 mm. Total height rear unladen 4,005 mm. Loading height rear unladen 1,274 mm. Tire size 385/65R22.5. Total weight (permitted/technical) 36,000/39,000 kg. Axle load (permitted/technical) 24,000/27,000 kg. Fifth wheel load (permitted/technical) 12,000/15,000 kg. Unladen weight complete 7,965 kg. Saddle height unladen 1,150 mm. Reference length outside 13,550 mm. Body width 2,600 mm. Rear door height 2,640 mm. Rear door width 2,490 mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120 disc brake 430 mm. Wheel mounting by centering according to DIN 74 361 part 3. Analog hubodometer, center right. Two-line compressed air brake system with standard couplings. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double membrane spring-loaded cylinder. Lifting and lowering device with AUTO-RESET function. Rotary switch for box interior lighting. Holder arrangement for light and brake connection. Power supply for box interior lighting via parking light. 2 sockets 7-pin: 1xDIN ISO3731 / 1xDIN ISO1185 and 1 socket ISO12098. 2 separate reversing lights. LED surround lighting right and left, installed in area of support winch. Tire brands SCB "SELECTION" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. 6x 385/65R22.5 (11.75x22.5). Extendable folding ladder installed on the right side in driving direction, partially under corner bumper. Plastic toolbox with lid holder, tray, and drawer behind the pallet box for 36 Euro/24 ISO pallets. Pallet box ground clearance 291 mm. Dynamic Ramp Protection DRP 3.0. Inside layer galvanized, coil-coated fine sheet, plastic-coated. Front wall insulated, NX17 foam, reinforced to accommodate refrigeration units. FP side wall insulated, COOL 45, NX17 foam. Pair of load securing rails, perforated rail at side wall STD-M recessed (13,400). Floor with center anchor rail 730 mm. Circulation wall approx. 1,890 mm high, made of aluminum hollow profiles. FP roof insulated, NX17 foam. Hat profile spacer as pallet stop for circulation wall V7. Double-winged rear door insulated, NX17 foam, with simple stainless steel lock. Base scuff plate – extruded profile 300 mm on rear door. Rubber door protector strips at rear bottom. Additional impact protection on rear door frame, lower crosspiece. Multifunction floor, MFF, test load 5,500 kg V7 (13,400). Height-adjustable DOST system type B1650 for 11x3 EURO pallets with 22 aluminum carrier bars. SKO V7 interior box lighting, extra bright (Plus). Cover for temperature recorder/printer. SCHMITZ plastic fuel tank black 245 l, 1 filler neck, suitable for biodiesel. TrailerConnect temperature recorder according to EU directive 12830. Air duct with tension band mounting 10,200 mm long, with openings in front of bulkhead po Pgsdpfx Asyumk Dsg Dsk

Condition: used, mileage: 399,171 km, power: 324 kW (440.52 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 19,565 kg, maximum load weight: 6,435 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,800 mm, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, loading space length: 5,600 mm, loading space width: 2,450 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * One owner * 6x4 Hydrodrive with steering axle * Documentation available * Genuine 399,171 km * Condition as shown in photos * Tipper body with Hiab crane, very rare * Truck crane HIAB type 477 EP-3 HIPRO * 5th and 6th control circuit * Radio remote control * 3 hydraulic extensions + 2 manual extensions * Hook height approx. 15 meters * Lifting capacity at 3.1 m = 12,000 kg, at 4.9 m = 7,800 kg, at 6.8 m = 5,500 kg, at 8.8 m = 4,100 kg, at 11 m = 3,200 kg, at 13.2 m = 2,620 kg * Floor-mounted controls * Four-way hydraulic outriggers * Crane foldable at the rear * Available at extra cost: work basket up to 300 kg (1000 volts insulated) and two clamshell buckets * Tipper with loading area: length 5,500 mm – width 2,450 mm – height 800 mm * Tipping hydraulics * Aluminium side panels * High front wall * Metal floor * Trailer hitch with electric & hydraulic connections * Trailer load 24,000 kg * Gross combination weight 40,000 kg * XL driver’s cab with one bed and two air-suspended comfort seats * Air conditioning * Refrigerator * Auxiliary heater * Leaf/air suspension + raise/lower function * Liftable trailing steering axle * Shunting coupling at the front * Seat heating * Sunroof * Electric windows * Electrically adjustable and heated mirrors * Engine brake (electric) * Multifunction steering wheel * Reversing camera * Blind spot assistant * Cruise control * Differential lock * Fog lights * Radio CD * ABS/ASR/ESP * Storage compartments * Beacon lights * High-mounted exhaust * Wheelbase 4,800 mm + 1,350 mm * Gross vehicle weight 26,000 kg * Unladen weight 19,565 kg * Payload 6,435 kg If a new technical inspection (TÜV) is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT new TÜV, DGUV, safety inspection, or accident prevention inspection. More trucks can be found on our homepage at Pjdpfxjy Dh Abo Ag Degk We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the item to avoid any misunderstandings regarding its condition and suitability. Viewing and inspection are possible and expressly encouraged at any time by appointment. All statements are subject to change and made without guarantee. We do not assume liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to change without notice, prior sale, and errors.

Condition: used, width / mm depth / mm height / mm weight / kg Turning & Milling Tool Set – approx. 85 pcs – SK40 – incl. Tool Cabinet For sale is a large set of high-quality turning and milling tools from well-known brands. Details: approx. 85 tools SK40 holders includes driven tools various tool holders, drills, milling cutters, etc. Psdpfx Agjy Diblj Dogk incl. solid blue tool cabinet Condition: Used, in good condition with normal signs of wear. Fully functional and ready to use. Scope of delivery: Everything as shown in the pictures. Ideal for CNC / metalworking / workshop use.

Condition: used, Renishaw RMP600 3D probe, SK40, including case Psdpfx Ajy Dibfog Degk Condition: used (functional)

Condition: used, Renishaw RMP60 3D probe, SK40, including case Pedpoy Dia Ujfx Ag Dogk Condition: used (functional)

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Pgedpfxoy Dia Ie Ag Djk Condition: Glass cover damaged, but function not affected.

Condition: good (used), mileage: 381,497 km, power: 353 kW (479.95 HP), first registration: 04/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,100 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - High roof - Air conditioning - LED lamp - Manual - Radio/cassette - Lane departure warning system - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Twin tyres, Total tank capacity: 610 liters, Fifth wheel height: 113 cm, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: High roof, Cruise control, Tachograph (control device), Digital tachograph, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Yellow, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine output: 353 kW (473 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox manufacturer: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 speeds, Automatic Psdpfx Agjy Atmce Degk Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/55R22.5; Steering; Tyre tread left: 11 mm; Tyre tread right: 13 mm; Suspension: Air suspension Axle 2: Tyre size: 315/70R22.5; Twin tyres; Tyre tread inner left: 15 mm; Tyre tread outer left: 16 mm; Tyre tread inner right: 15 mm; Tyre tread outer right: 15 mm; Suspension: Coil spring suspension Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Financial Information Leasing rate: €606 per month (default, 60 months); Please inquire for more details and conditions Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, models, and price classes. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Great prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of “recognizable quality” • And much more... Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Pedoy Ardyspfx Ag Dsgk

Condition: used, axle configuration: 2 axles, first registration: 12/2021, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2021, Operating hours Diesel: 5,468 / Mains: 296 Body strength certified according to DIN EN 12642 Code XL ("TÜV Load Securing Certificate") 2 rear markings 565x200 ECE-R70 mounted horizontally on rear wall Vehicle complies with EC type approval and supplied with Certificate of Conformity (CoC) Body certified according to HACCP guidelines, incl. HACCP certificate and sticker on STW International customs seal for body with rear door, with customs seal acceptance Customs seal capability guaranteed by customer when external KG is fitted 10-year anti-corrosion warranty (see warranty conditions) E-bike holder, basket design for 2 e-bikes behind the unit, SKO COOL 4 pairs of ferrylashings to DIN/ISO 9367 for SKO COOL, with support stand Model SKO 24/L - 13.4 FP COOL V7 Manufacturing Date 07.12.2021 Body length 13,403 mm Body width 2,490 mm Body height 2,650 mm Usable body length 13,315 mm Usable body height 2,550 mm Overall height unladen 4,008 mm Overall height front unladen 4,021 mm Overall height rear unladen 4,005 mm Loading height rear unladen 1,274 mm Tyre size 385/65R22.5 GVW (perm./ technical) 36,000 / 39,000 kg Pedpsyumkwjfx Ag Djgk Axle load (perm./ technical) 24,000 / 27,000 kg King pin load (perm./ technical) 12,000 / 15,000 kg Tare weight complete 7,965 kg Fifth wheel height unladen 1,150 mm Reference length outside 13,550 mm Body width 2,600 mm Rear door height 2,640 mm Rear door width 2,490 mm ROTOS SCB running gear system (disc brake) SCB axle 9 t, SP2040, FM1300, ET 120, disc brake 430 mm Wheel fixation via hub centering to DIN 74 361 Part 3 Hubodometer analog, centre right Two-line compressed air braking system with standard couplings EBS 2S/2M with stability program EBS power supply via ISO 7638 + CAN Lift and lowering device with AUTO-RESET function 24V lighting system with double round 3-chamber lights and 1 rear fog lamp Rotary switch for interior lighting, holder arrangement for light and brake connections 2 sockets 7-pin (1x DIN ISO 3731 / 1x DIN ISO 1185) and 1 socket ISO 12098 LED side marker lights connected to indicators 2 outline marker lights front (white), 2 rear (red) 2 position lights and corner marker bottom 2 separate reversing lights LED perimeter lighting right and left, mounted near landing leg Tyre brand SCB "SELECTION" - Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone Plastic toolbox with lid holder, shelf and drawer behind 2 large vertical rubber bumpers on lamp bracket Pallet box for 36 Euro / 24 ISO pallets Ground clearance pallet box 291 mm Dynamic Ramp Protection DRP 3.0 Polyurethane rigid foam panels thermal bridge free - vapor diffusion tight Inner skin galvanized coil-coated steel, plastic coated Front wall insulated, NX17 foam, reinforced to accommodate cooling unit FP side wall insulated, COOL 45, NX17 foam Pair of load securing rails slot-perforated at side wall, STD-M, built-in (13,400 mm) Floor with centre 1 anchor rail 730 mm Circulation wall approx. 1,890 mm high, aluminium hollow profiles FP roof insulated, NX17 foam Hat profile distance as pallet stop for circulation wall V7 Double rear door, insulated NX17 foam, simple stainless steel locking Scuff rail extrusion 300mm at rear door Additional underrun protection on lower rear frame Multifunction floor MFF, test load 5,500 kg V7 (13,400)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard Pgsdpfx Ageyaq Nhs Dek – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm Podpfjyardmox Ag Degk - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations) Pgodpfxjyi Tn Se Ag Dsk

Condition: used, mileage: 371,669 km, power: 324 kW (440.52 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 16,560 kg, maximum load weight: 9,440 kg, overall weight: 26,000 kg, axle configuration: 6x4, next inspection (TÜV): 06/2026, fuel: diesel, color: blue, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, crane, cruise control, differential lock, trailer coupling, * MKG crane HLK 231 HP a5 * 5 hydraulic extensions + 2 mechanical extensions, outreach 18.71 m / 790 kg * Radio remote control * Grab control * Meiller rock tipper * Hydraulic tailgate * Hydraulic connections for tipper trailer * AP axles Pgsdpfxjy Dz Hys Ag Dsk * Rockinger towing jaw * Leaf suspension * Turn assist system * Reversing camera ... Roof type: roof hatch, radio, cruise control, anti-lock braking system (ABS), differential lock, leaf-sprung, air-suspended driver seat, automatic climate control, front seat heating, electric windows, driver seat heating, heated mirrors, electrically adjustable mirrors, trailer coupling, crane, single owner, automatic, used vehicle, diesel, incl. VAT.